Electroseparation of an antibacterial peptide fraction from snow crab by-products hydrolysate by electrodialysis with ultrafiltration membranes

Recently, a snow crab by-products hydrolysate has demonstrated antibacterial properties due to a peptide with a molecular weight of about 800 Da, but only at high concentration. Consequently, peptide hydrolysate has been fractionated to obtain peptides in a more purified form. The aim of this work was to separate a snow crab by-products hydrolysate by electrodialysis with ultrafiltration membranes (EDUF). EDUF, which allows separation of molecules according to their charges and molecular weights, was used to recover and concentrate the active antibacterial fraction. Two different ultrafiltration membranes (20 and 50 kDa) and two electrical field strengths (2 and 14 V/cm) were used as separation parameters. After EDUF separation, the 300-600 Da peptide molecular weight range was the most recovered with an abundance of 94%. Moreover, fractionation at 14 V/cm with ultrafiltration membranes of 50 kDa allowed the recovery of an anionic fraction which showed antibacterial properties on Escherichia coli ATCC 25922 and Listeria innocua HPB 13.     

Selecting creep models using Bayesian methods

The development of creep prediction models has been a field of extensive research and many different models have already been proposed. This paper presents an evaluation method of the prediction quality of creep models for specific experimental data. Within the scope of this paper, the model according to Bockhold and the model according to Heidolf are examined. First, the parameters of the models are identified with respect to existing experimental data. This is done using a sampling based approach of Bayesian updating developed by Ba?ant and Chern. In extension to the method by Ba?ant and Chern, the uncertainty coming from inaccurate measurement data is taken into account in the definition of the likelihood function within the updating algorithm. The more inaccurate the measurements are, the more uncertain the estimated model parameters and model prognoses become. The identification is performed for different short- and long-term creep tests. The intension is not to validate these models intensively, but to evaluate their prognoses for the individually tested creep behavior. The results show that the identifiability of the models?? parameters is different for both models and consequently the models prognoses differ in their uncertainties. Second, the models are evaluated using two different strategies: the stochastic model selection according to MacKay, Beck and Yuen based on the Ockham factor, and a comparison of the uncertainties taking into account parameter and model uncertainties. The results of the evaluation of the creep models differ for various experimental tests. Model Heidolf is more flexible and gives a better fit to the data, however, it fails to predict reliable long-term creep deformations using only short-term measurements compared to model Bockhold. Comparing the evaluation methods, the analysis of uncertainties of the creep prognosis proofs to be more stable than the evaluation using the stochastic model selection.     

Erratum to: Evaluation of the Particle Bonding for Aluminum Sample Produced by Spark Plasma Sintering

Journal of Materials Engineering and Performance -     

<Emphasis Type="Italic">N</Emphasis>-Acylated Bacteriohopanehexol-Mannosamides from the Thermophilic Bacterium <Emphasis Type="Italic">Alicyclobacillus acidoterrestris</Emphasis>

Identification of molecular species of various N-acylated bacteriohopanehexol-mannosamides from the thermophilic bacterium Alicyclobacillus acidoterrestris by semipreparative HPLC and by RP-HPLC with ESI is described. We used triple-quadrupole type mass spectrometer, ¹H and ¹³C NMR for analyzing this complex lipid. CD spectra of two compounds (model compound—7-deoxy-d-glycero-d-allo-heptitol obtained by stereospecific synthesis, and an isolated derivative of hopane) were also measured and the absolute configuration of both compounds was determined. On the basis of all the above methods, we identified the full structure of a new class of bacteriohopanes, represented by various N-acylated bacteriohopanehexol-mannosamides.     

Arsenic in atmospheric deposition at the Czech-Polish border: two sampling campaigns 20 years apart

Arsenic (As) occurs in atmospheric deposition both in soluble and insoluble forms, mainly bound to fine aerosol particles (less than 2.5 microm). Interception deposition (i.e. fog, dew and ice accretion) represents a specific type of atmospheric deposition, which has been much more contaminated with As than bulk deposition. This study compares the As amount and its binding forms in bulk and interception deposition in the winters of 1984-1986 and 2003-2005 in the Orlické hory mountains (Adlergebirge) near the Czech-Polish border; sampled and analysed by the same methodology. The As concentrations in ice accretions decreased 16 times over the twenty year period (from 50 microg L(-1) to 3 microg L(-1)), while the pH values increased by 0.8 units. As concentrations in snow decreased from 15 microg L(-1) in 1984-1986 to <2 microg L(-1) in 2003-2005. This decline mirrored the considerable decrease in industrial emissions in Central Europe. Higher acidity of interception deposition (about 1 pH unit) in comparison with the bulk deposition was observed in both sampling periods. The quantity of bulk deposition (snowfall) also influenced the As concentration in interception deposition. Dry periods resulted in higher As-amounts in interception deposition due to limited washing of atmospheric aerosol particles by wet deposition. The As concentration and stability in atmospheric deposition are important for the study of subsequent As-migration and/or accumulation in soil -- groundwater -- surface water.     

Thermal Analysis and Cone Calorimeter Study of Engineered Wood with an Emphasis on Fire Modelling

Fire Technology - Engineered wood products (EWPs) are a group of materials having a very similar chemical composition but having different and non-uniform thermo-physical properties throughout...     

Performance of Sulfate-reducing Passive Bioreactors for the Removal of Cd and Zn from Mine Drainage in a Cold Climate

Mine Water and the Environment - Passive treatment is a promising, green technology that is increasingly being used for mine drainage treatment. However, several challenges remain concerning its...     

A New and Fast HPLC Method for Determination of Rutin, Troxerutin, Diosmin and Hesperidin in Food Supplements Using Fused-Core Column Technology

A new and fast high-performance liquid chromatography (HPLC) method using fused-core column for separation of rutin, troxerutin, diosmin, and hesperidin has been developed and used for determination of these flavonoids in food supplements. Efficient separation of flavonoids and internal standard methylparaben was achieved on the fused-core column Ascentis Express RP-Amide (100?×?3.0 mm), particle size 2.7 μm, with mobile phase acetonitrile/water solution of acetic acid pH?3 (30:70, v/v) at a flow rate of 1.0 mL?min^?1 and at temperature 50 °C. The detection wavelengths were set at 283 nm for hesperidin and at 255 nm for rutin, troxerutin, diosmin, and internal standard methylparaben. Under the optimal chromatographic conditions, good linearity with correlation coefficients in the range (r?=?0.9991–0.9998; n?=?7) for all flavonoids was achieved. Commercial samples of food supplements were extracted with 100 % dimethyl sulfoxide using ultrasound bath for 10 min and then diluted to methanol. A 5-μL sample volume of the filtered solution was directly injected into the HPLC system. Accuracy of the method defined as a mean recovery of flavonoids from food supplement matrix was in the range 96.2–104.4 % for all flavonoids. The intraday method precision was satisfactory, and relative standard deviations of sample analysis including preparation and determination of different food supplements were in the range 0.5–3.5 % for all flavonoids. The developed method has shown high sample throughput during sample preparation process, modern separation approach, and short time (5 min) of analysis.     

Imaging of mouse experimental melanoma in vivo and ex vivo by combination of confocal and nonlinear microscopy

We investigated possibilities of the combination of the one- and two-photon excitation microscopy for examination of the experimental melanoma tissue in vivo, in mice under general anesthesia, and ex vivo on freshly harvested specimens. Our aim was to obtain sufficiently informative images of unstained tumor tissues and their modifications after hyperthermia treatment. The mouse experimental melanoma structure was studied and compared with normal tissue from the same animal by using confocal and nonlinear microscopy techniques based on (i) one-photon excitation (1PE) fluorescence, (ii) 1PE reflectance, (iii) second harmonic generation imaging, and (iv) two-photon excitation autofluorescence. We checked different spectral conditions and other settings of image acquisition, as well as combinations of the above imaging modalities, to fully exploit the potential of these techniques in the evaluation of treated and untreated cancer tissue morphology. Our approach enabled to reveal the collagen fiber network in relation with the other tissues, and to identify invasive tumor cells. It also proved to be useful for the examination of interrelationships between functional and morphological aspects based on optical properties of the tissues, especially in studies of changes between the tumor and control tissue, as well as changes induced by physical treatments, e.g., delivery of microwave hyperthermia treatment. These differences were also evaluated quantitatively, when we found out that the maximum Euler–Poincaré characteristic reflects well the melanoma morphological structure. The results showed that the proposed investigative approach could be suitable also for a direct evaluation of tissue modifications induced by clinical interventions. Microsc. Res. Tech., 2009. © 2009 Wiley-Liss, Inc.