A comparison study of the two-tier and the single-tier personal communications services systems

A two-tier PCS system integrates the high tier PCS system and the low tier PCS systems into a single system to provide the advantages of both tiers. Such a system is expected to provide better service (more available and more cost effective to the users) at the expense of the extra tier switching management. We compare the performance of the two-tier PCS system and the single low tier system in two aspects: the registration traffic and the service availability. Because of the tier management, the two-tier system generates more registration traffic than the single low tier system. Under the range of the input parameters in our study, we show that the two-tier system generates less than 10% extra registration traffic than the single low tier system in most cases and generates less than 20% registration traffic in the worst cases. It is clear that for the service availability, the two-tier system is better than the single one tier system. We also study the probability that a call is forced terminated in the single low tier system because the low tier becomes unavailable during the call (such a call can be continued in the two-tier system).     

汽油机爆震强度的分析

分析了汽油机缸内气体爆震燃烧压力的频率特性并推导了爆震压力共振频率计算公式。研究表明：在爆震工况下，缸内压力在高频域中有几个共振峰，峰的大小表明了汽油机爆震强度。汽油机的表面振动在这些共振频率峰处也出现相应振动峰。表面振动峰与缸力压内峰值近似成正比。汽油机表面振动峰值可作为爆震强度的评价指标，该结论在ＣＡ１１０２汽油机上得到了证实。     

One-stage sternal stenting with homograft bone after cardiac operation in pediatric patients

Low cardiac output after open heart operations in neonates and infants carries a high mortality. Delayed sternal closure may be life-saving but may prolong hospital stay and increase costs. To circumvent these issues, we shaped homograft bone and interposed it between the sternal edges to allow primary wound closure in 2 pediatric patients. Midterm results are satisfactory.     

Self-care behaviors, self-efficacy, and social support effect on the glycemic control of patients newly diagnosed with non-insulin-dependent diabetes mellitus

The purpose of this study was to explore the glycemic control and influencing factors in outpatients newly diagnosed with non-insulin-dependent diabetes mellitus (NIDDM). By purposeful sampling, data were collected from 130 outpatients with NIDDM at one medical center in Kaohsiung. The results indicated: (1) the mean value for HbA1C was 7.12%; and 63.1% of the patients belonged to moderate to well controlled group; (2) male patient's HbA1C value was significantly lower than female patient's; patients with no religious belief also had a lower HbA1C value than patients with a religious background; (3) there were strongly negative correlations between self-care behaviors, social support, and self-efficacy and HbA1C; (4) using a multiple stepwise regression analysis, religious belief and self-care behaviors were found to explain 10.9% variance of HbA1C level. The results of this study could be used as a reference for diabetes health education program.     

A new process of fabricating inverted-staggered tri-layer thin-filmtransistors

A new method of fabricating a-Si:H TFT with etching-stop structure has been proposed. Only one plasma-enhanced chemical vapor deposition is required in this new method and a PH₃/H₂ plasma treatment during the deposition has been used to form the TFT contact and thus saved another plasma deposition. With this method, a TFT of 500 Å active layer has been fabricated successfully. The drain current and saturation mobility of this device is 2.4×10^-7 A and 0.1 cm²/V sec, respectively, which is comparable to the conventional fabricating method. The plasma treatment will also form an additional leakage path on the TFT top surface and increase the TFT subthreshold slope. However, a current of less than 1 pA at V_G=-2.4 V can still be obtained. The possible mechanism of the contact formation by the plasma treatment is also discussed     

连铸坯的液芯轧制

研究了连铸坯的液芯轧制，并结合日本川崎永岛厂的实例，证实了连铸坯液芯轧制的可行性，指出了钢锭和连铸坯液芯轧制的区别，及如何制造压应力状态，推导了坯壳应力与轧辊直径压下量，坯壳厚度的关系，并提出了用振摆式轧机实施连铸机液芯轧制的方案。     

一种新型发射技术-冲压加速原理

介绍一种新型发射技术──冲压加速原理，它在仅仅利用化学能的条件下，可将弹丸加速到超过２ｋｍ／ｓ的非常规初速，加速效率很高，弹迫效率可高达３０％，是一种很有发展前途的超高速发射技术。     

用过零时间法分析的中能重离子探测器望远镜

本文描述了中能重离子探测器望远镜ＮＥ１０２Ａ＋ＣｓＩ（Ｔｌ）＋ＰＭＴ采用过零时间的方法鉴别粒子，实验结果表明可清楚地分辨ｐ、ｄ、ｔ同位素和探测到的全部碎片。     

20keV～17MeV中子能谱测量

基于质子反冲方法，建立了一套宽能区，高效率的中子谱仪系统，分别用三支充不同气压氢和甲烷的球形正经计数管和一个有机闪烁探没器分段测量２０ｋｅＶ～１７ＭｅＶ的中子能谱，为了去除γ射线本底，对两种探测器分别采用了两种不同的脉冲形状别技术，谱仪直接测量的是中子在探测器中产生的反冲质脉冲幅度谱，通过解决矩阵方程的方法得到中子谱，解谱中所用的各个探测器的中子响应矩阵均蒙特－卡洛方法计算得到，谱仪在全能区的中子     

测量高功率激光的体吸收能量计

叙述了体吸收激光能量计的特点，介绍了其标定方法，给出了其技术参数。体吸收激光地的推广应用取得了广泛的社会效益。