The performance of a distributed combat simulation with the time warp operating system

This paper analyzes the performance of a discrete-event combat simulation executed on a parallel processor under control of the Time Warp Operating System. Time Warp is in a class of distributed simulation methods called Optimistic methods which have proven to be useful over a wide range of simulations. The combat simulation used for this performance study, called STB88, is a division-corps model incorporating a number of different types of computations. The speed-up for three versions of this model on the Caltech/JPL Mark III Hypercube and the BBN Butterfly parallel processors was measured relative to an efficient sequential execution of the same model on the same hardware. The results indicate that STB88 version 1 achieves a speed-up of 28.6 on 60 Mark III processors, while STB88 version 2 achieves a speed-up of 36.8 on 100 Butterfly processors. Version 3 of STB88 achieved a speed-up of 38.5 on 128 Mark III processors. The versions differed only in their interface to Time Warp. On the Butterfly, the sequential execution completed in 2 hours, while the 100 processor execution completed in 3.2 minutes.     

Vanadium oxide supported γ-alumina with bimodal porous structure for intra-particle diffusion enhancement in styrene oxidation reaction

Porous γ-alumina with well arranged secondary mesopores has been contrived using nanosized templating units. The pore size of templated mesopores is precisely controlled as the pore shrinkage is insignificant. The primary pore diameter is ca. 4 nm and the secondary pore diameter is ca. 50 nm. The porous material was characterized using N₂ adsorption/desorption, TEM, XRD and FT-IR. γ-alumina with bimodal pore size distribution shows improved intra-particle diffusion compared to γ-alumina with unimodal pore size distribution in a simple dye adsorption test. γ-alumina with different porous structures were then impregnated with vanadium oxide for catalytic effect comparison. It was perceived that secondary pores improve the styrene oxidation rate after the conversion of styrene reaches 30%.     

Vandetanib versus Cabozantinib in Medullary Thyroid Carcinoma: A Focus on Anti-Angiogenic Effects in Zebrafish Model

Medullary thyroid carcinoma (MTC) is a tumor deriving from the thyroid C cells. Vandetanib (VAN) and cabozantinib (CAB) are two tyrosine kinase inhibitors targeting REarranged during Transfection (RET) and other kinase receptors and are approved for the treatment of advanced MTC. We aim to compare the in vitro and in vivo anti-tumor activity of VAN and CAB in MTC. The effects of VAN and CAB on viability, cell cycle, and apoptosis of TT and MZ-CRC-1 cells are evaluated in vitro using an MTT assay, DNA flow cytometry with propidium iodide, and Annexin V-FITC/propidium iodide staining, respectively. In vivo, the anti-angiogenic potential of VAN and CAB is evaluated in Tg(fli1a:EGFP)^y1 transgenic fluorescent zebrafish embryos by analyzing the effects on the physiological development of the sub-intestinal vein plexus and the tumor-induced angiogenesis after TT and MZ-CRC-1 xenotransplantation. VAN and CAB exert comparable effects on TT and MZ-CRC-1 viability inhibition and cell cycle perturbation, and stimulated apoptosis with a prominent effect by VAN in MZ-CRC-1 and CAB in TT cells. Regarding zebrafish, both drugs inhibit angiogenesis in a dose-dependent manner, in particular CAB shows a more potent anti-angiogenic activity than VAN. To conclude, although VAN and CAB show comparable antiproliferative effects in MTC, the anti-angiogenic activity of CAB appears to be more relevant.     

Chloride and Indium‐Chloride‐Complex Inorganic Ligands for Efficient Stabilization of Nanocrystals in Solution and Doping of Nanocrystal Solids

Here, the surface functionalization of CdSe and CdSe/CdS core/shell nanocrystals (NCs) with compact chloride and indium‐chloride‐complex ligands is reported. The ligands provide not only short interparticle distances but additionally control doping and passivation of surface trap states, leading to enhanced electronic coupling in NC‐based arrays. The solids based on these NCs show an excellent electronic transport behavior after heat treatment at the relatively low temperature of 190 °C. Indeed, the indium‐chlorido‐capped 4.5 nm CdSe NC based thin‐film field‐effect transistor reaches a saturation mobility of μ = 4.1 cm² (V s)^?1 accompanied by a low hysteresis, while retaining the typical features of strongly quantum confined semiconductor NCs. The capping with chloride ions preserves the high photoluminescence quantum yield ( ≈ 66%) of CdSe/CdS core/shell NCs even when the CdS shell is relatively thin (six monolayers). The simplicity of the chemical incorporation of chlorine and indium species via solution ligand exchange, the efficient electronic passivation of the NC surface, as well as their high stability as dispersions make these materials especially attractive for wide‐area solution‐processable fabrication of NC‐based devices.     

Contact Doping for Vertical Organic Field‐Effect Transistors

Doping is a powerful tool to overcome contact limitations in short‐channel organic field‐effect transistors (OFETs) and has been successfully used in the past to improve the charge carrier injection in OFETs. The present study applies this familiar concept to the architecture of vertical organic field‐effect transistors (VOFETs), which are often severely limited by injection due to their very short channel lengths. The present study shows that the performance of p‐type VOFETs with pentacene as an active material can be significantly enhanced by the addition of the common p‐dopant C₆₀F₃₆ as a thin injection layer underneath the VOFET source electrode, resulting in an increase of On‐state current and On/Off ratio by one order of magnitude. The present study further investigates mixed injection layers of pentacene and the p‐dopant and finds that the improvement is less pronounced than for the pure dopant layers and depends on the concentration of dopant molecules in the injection layer. Through application of the transfer length method to equivalent OFET geometries, the present study is finally able to link the observed improvement to a decrease in transfer length and can thus conclude that this length is a crucial parameter onto which further improvement efforts have to be concentrated to realize true short‐channel VOFETs.     

An explanation of disproportionate growth using linear 3-dimensional informetrics and its relation with the fractal dimension

Summary We study new and existing data sets which show that growth rates of sources usually are different from growth rates of items. Examples: references in publications grow with a rate that is different (usually higher) from the growth rate of the publications themselves; article growth rates are different from journal growth rates and so on. In this paper we interpret this phenomenon of “disproportionate growth' in terms of Naranan's growth model and in terms of the self-similar fractal dimension of such an information system, which follows from Naranan's growth model. The main part of the paper is devoted to explain disproportionate growth. We show that the “simple' 2-dimensional informetrics models of source-item relations are not able to explain this but we also show that linear 3-dimensional informetrics (i.e. adding a new source set) is capable to model disproportionate growth. Formulae of such different growth rates are presented using Lotkaian informetrics and new and existing data sets are presented and interpreted in terms of the used linear 3-dimensional model.     

Chromogenic Photonic Crystal Sensors Enabled by Multistimuli‐Responsive Shape Memory Polymers

Here novel chromogenic photonic crystal sensors based on smart shape memory polymers (SMPs) comprising polyester/polyether‐based urethane acrylates blended with tripropylene glycol diacrylate are reported, which exhibit nontraditional all‐room‐temperature shape memory (SM) effects. Stepwise recovery of the collapsed macropores with 350 nm diameter created by a “cold” programming process leads to easily perceived color changes that can be correlated with the concentrations of swelling analytes in complex, multicomponent nonswelling mixtures. High sensitivity (as low as 10 ppm) and unprecedented measurement range (from 10 ppm to 30 vol%) for analyzing ethanol in octane and gasoline have been demonstrated by leveraging colorimetric sensing in both liquid and gas phases. Proof‐of‐concept tests for specifically detecting ethanol in consumer medical and healthcare products have also been demonstrated. These sensors are inexpensive, reusable, durable, and readily deployable with mobile platforms for quantitative analysis. Additionally, theoretical modeling of solvent diffusion in macroporous SMPs provides fundamental insights into the mechanisms of nanoscopic SM recovery, which is a topic that has received little examination. These novel sensors are of great technological importance in a wide spectrum of applications ranging from environmental monitoring and workplace hazard identification to threat detection and process/product control in chemical, petroleum, and pharmaceutical industries.     

In-line deposition of organic light-emitting devices for large area applications

Light-emitting diodes based on organic semiconductors show promising features for display and lighting applications. A vertical in-line deposition technique for organic light-emitting diode (OLED) manufacturing was developed.OLED devices with electrically doped transport layers show low operating voltage, high efficiency and long lifetime. The preparation of p-i-n type devices was performed with the in-line fabrication tool resulting in highly efficient OLED with low operating voltage. The lowest operating voltage was achieved for green diodes with 2.9 V for 100 cd/m². This demonstrates that the p-i-n device concept can be applied under manufacturing conditions. In-line manufactured highly efficient red, green and blue OLED are presented.One important aspect for fabrication cost is the used ground contact, which is commonly made by indium tin oxide (ITO). For low cost fabrication an alternative for ITO has to be used. In this work, ITO was replaced by aluminium doped zinc oxide (ZAO). The results are comparable to OLEDs using ITO as transparent conductive oxide.     

Anomalous independence of multiple exciton generation on different group IV-VI quantum dot architectures

Multiple exciton generation (MEG) in PbSe quantum dots (QDs), PbSe(x)S(1-x) alloy QDs, PbSe/PbS core/shell QDs, and PbSe/PbSe(y)S(1-y) core/alloy-shell QDs was studied with time-resolved optical pump and probe spectroscopy. The optical absorption exhibits a red-shift upon the introduction of a shell around a PbSe core, which increases with the thickness of the shell. According to electronic structure calculations this can be attributed to charge delocalization into the shell. Remarkably, the measured quantum yield of MEG, the hot exciton cooling rate, and the Auger recombination rate of biexcitons are similar for pure PbSe QDs and core/shell QDs with the same core size and varying shell thickness. The higher density of states in the alloy and core/shell QDs provide a faster exciton cooling channel that likely competes with the fast MEG process due to a higher biexciton density of states. Calculations reveal only a minor asymmetric delocalization of holes and electrons over the entire core/shell volume, which may partially explain why the Auger recombination rate does not depend on the presence of a shell.