Morphological compression of grayscale images of text

A new method for compression of grayscale images containing a small number of graphical elements is proposed. The method is characterized by high compression ratios, small losses, and good readability of the processed images. It is based on morphological methods of image analysis and could be used to store images of documents produced by fax machines, scanners, etc. Igor I. Falomkin. Born 1979. Graduated from the Faculty of Physics, Moscow State University, in 2001. Scientific interests: image analysis and recognition, analysis and interpretation of experimental data.     

A comparison of procedures for estimating the impact of nondensable gases on steam condensation taking into account the interaction of power engineering processes in the primary circuit of a nuclear power installation

We consider two procedures for evaluating the influence of nondensables on steam condensation taking into account the integral effect from interaction between the water-chemistry and thermal-hydrodynamic processes occurring in the primary coolant circuit of a nuclear power installation (NPI). Results from calculations of the passive safety system of an NPI are given.     

Glass crystal materials made from mineral and technogenic feedstock from Karelia

Facing and decorative glass crystal materials were developed from mineral feedstock and technogenic wastes. The effect of the components present in the mineral feedstock in liquation and crystallization of the glasses was investigated. The materials obtained can be used in construction for facing walls.     

Effect of pulse duration and size of interelectrode interval on electric-spark spraying. I. Effect of pulse duration and size of interelectrode interval on rate of electric-spark transfer

The influence exerted by electric-spark spraying on the kinetics of mass transfer and the physicomechanical properties of coatings is investigated. It is shown that electric-spark spraying is determined by the dynamic properties of the cathode jets, which depend on the electrical parameters of the spark discharge, the size of the interelectrode interval, and the physical properties of the coatings, which vary during spraying.     

Enhancement of oxide break-up by implantation of fluorine inpoly-Si emitter contacted p+-n shallow junctionformation

In this study, it is demonstrated that the incorporation of fluorine can enhance poly-Si/Si interfacial oxide break-up in the poly-Si emitter contacted p⁺-n shallow junction formation. The annealing temperature for breaking up the poly-Si/Si interfacial oxide has been found to be as low as 900°C. As a result, the junction depth of the BF₂-implanted device is much larger than that of the boron-implanted device     

Pd-Ge contact to n-GaAs with the TiW diffusion barrier

Pd-Ge based ohmic contact to n-GaAs with a TiW diffusion barrier was investigated. Electrical analysis as well as Auger electron spectroscopy and the scanning electron microscopy were used to study the contact after it was subjected to different furnace and rapid thermal annealing and different aging steps. All analyses show that TiW can act as a good barrier metal for the Au/Ge/Pd/n-GaAs contact system. A value of 1.45 × 10⁻⁶ Ω-cm² for the specific contact resistance was obtained for the Au/TiW/Ge/Pd/n-GaAs contact after it was rapid thermally annealed at 425°C for 90 s. It can withstand a thermal aging at 350°C for 40 h with its ρ_c increasing to 2.94 × 10⁻⁶Ω-cm² and for an aging at 410°C for 40 h with its ρ_c increasing to 1.38 × 10⁻⁵ Ω-cm².     

X-ray diffraction study of the structure of Al-Ni melts

The structures of Al-Ni melts with 0, 10, 18, 25, 28, 32, 40, 75, 90, and 100 at % Ni are studied by X-ray diffraction. The structural models of the melts, which were analyzed by the Voronoi-Delaunay transformation method, are reconstructed by a procedure that is inverse to the Monte Carlo method using experimental structure-factor curves. The parameters characterizing atomic ordering at short and longer distances are determined to change nonmonotonically in the range 10–40 at % Ni with an extreme in the vicinity of the melt containing 28 at % Ni. In this concentration range, nickel atoms are predominantly located in the pentagonal rings of polytetrahedral clusters of the icosahedral type; these atoms are ～4.1 Å from each other. Such clusters generate a prepeak in the structure-factor curves of the melts in the range 10–40 at % Ni.     

Effect of saturation parameters on the interaction of titanium alloys with carbon-nitrogen-containing media

We study some specific features of phase formation and gas saturation in the course of chemical and thermal treatment of VT1-0, OT4, and VT14 titanium alloys in carbon-nitrogen-containing (graphite and nitrogen under atmospheric pressure) and nitrogen-containing (molecular nitrogen under atmospheric pressure) media. Saturation was carried out at 750–1100°C, and the time of isothermal holding was 5 or 20 h. We have shown that, irrespective of the composition of the saturating medium, within the range 750–1000°C, the phase composition of coatings is identical and consists of TiN and Ti₂N nitrides. The quantitative proportions between them depend on the temperature and time of treatment. Owing to the specific features of the composition of a carbon-nitrogen-containing medium, the depth of the diffusion sublayer increases, and the stoichiometry of cubic nitride decreases, which leads to an increase in the surface microhardness of nitride coatings. Carbonitride coatings are formed only at high saturation temperature (1100°C). Their maximum hardness is 2.5 GPa higher than that of nitrides formed under similar conditions.Translated from Fizyko-Khimichna Mekhanika Materialiv, Vol. 40, No. 3, pp. 81–87, May–June, 2004.     

Photosensitive structures based on ZnIn<Subscript>2</Subscript>Se<Subscript>4</Subscript> single crystals

Photosensitive structures of surface-barrier and homojunction types have been fabricated for the first time on the basis of ZnIn₂Se₄ single crystals. The spectral dependence of the quantum efficiency of photoconversion has been studied and discussed. It is concluded that the structures are promising for commercial applications.     

Methods of rotating stall and surge detection in centrifugal compressors

Systems for prevention of surging of centrifugal compressors and methods of rotating stall detection and early surge diagnosis using statistical processing of sensor signals of various parameters, i.e., the method of calculation of the correlation function of the signal and the method of calculation of signal dispersion, are discussed. The results of routine tests of air and high-speed air centrifugal compressors and their detachable flow parts are adduced. __________ Translated from Khimicheskoe i Neftegazovoe Mashinostroenie, No. 6, pp. 30–33, June, 2006.