Spectrophotometric characterization of human impacted surface waters in the Moselle watershed

In order to characterize the pollution discharged into the Moselle River and some of its tributaries, spectroscopic techniques, namely UV-vis spectroscopy and synchronous fluorescence spectroscopy, have been combined. UV-visible spectra were analysed using the maximum of the second derivative at 225 nm (related to nitrates), the SUVA254 and E2/E3 indices (related to the nature of organic matter). Synchronous fluorescence spectra (delta lambda = 50 nm) presented different shapes depending upon the type of pollution. The pollution results from anthropogenic activities: untreated domestic sewage due to misconnections in a periurban river, effluent from urban WWTPS, agricultural runoff (nitrates) in several streams, discharge from a paper mill (humic-like substances due to wood processing) and from steel mills (PAHs).     

Flow profile measurement in microchannel using the optical feedback interferometry sensing technique

The need to accurately measure flow profiles in microfluidic channels is well recognised. In this work, we present a new optical feedback interferometry (OFI) flow sensor that accurately measures local velocity in fluids and enables reconstruction of a velocity profile inside a microchannel. OFI is a self-aligned interferometric technique that uses the laser as both the transmitter and the receiver thus offering high sensitivity, fast response, and a simple and compact optical design. The system described here is based on a commercial semiconductor laser and has been designed to achieve a micrometer-range spatial resolution. The sensor performance was validated by reconstructing the velocity profile inside a circular cross-section flow-channel with 320  $\upmu $ m internal diameter, with a relative error smaller than 1.8 %. The local flow velocity is directly measured, thus avoiding the need for model based profile calculation and uncertainties inherent to this approach. The system was validated by successfully extracting the flow profiles in both Newtonian and shear-thinning liquids.     

Characterization of AlPO systems,precursors of the novel basic catalyst family AlPON

XPS and DRIFTS (diffuse reflectance infrared spectroscopy) spectra of AlPO systems, formally AlPO₄-Al₂O₃, obtained by the sol-gel method have been studied in order to understand their geometric and electronic structure. Both DRIFTS and XPS demonstrate that the acidbase character of these samples depends on a structural modification. For low phosphorus content an amorphous spinel-like solid is proposed. This geometric arrangement alters the electronic density of oxide ions and phosphorus cations and hence their Lewis acid-base properties with respect to the amorphous solid having aluminium and phosphorus only in tetrahedral arrangement.     

Discrimination between accelerated life models via Approximate Bayesian Computation

Accelerated life testing (ALT) is widely used in high-reliability product estimation to get relevant information about an item's performance and its failure mechanisms. To analyse the observed ALT data, reliability practitioners need to select a suitable accelerated life model based on the nature of the stress and the physics involved. A statistical model consists of (i) a lifetime distribution that represents the scatter in product life and (ii) a relationship between life and stress. In practice, several accelerated life models could be used for the same failure mode and the choice of the best model is far from trivial. For this reason, an efficient selection procedure to discriminate between a set of competing accelerated life models is of great importance for practitioners. In this paper, accelerated life model selection is approached by using the Approximate Bayesian Computation (ABC) method and a likelihood-based approach for comparison purposes. To demonstrate the efficiency of the ABC method in calibrating and selecting accelerated life model, an extensive Monte Carlo simulation study is carried out using different distances to measure the discrepancy between the empirical and simulated times of failure data. Then, the ABC algorithm is applied to real accelerated fatigue life data in order to select the most likely model among five plausible models. It has been demonstrated that the ABC method outperforms the likelihood-based approach in terms of reliability predictions mainly at lower percentiles particularly useful in reliability engineering and risk assessment applications. Moreover, it has shown that ABC could mitigate the effects of model misspecification through an appropriate choice of the distance function.     

A new framework for sharp and efficient resolution of NCSP with manifolds of solutions

When numerical CSPs are used to solve systems of n equations with n variables, the preconditioned interval Newton operator plays two key roles: First it allows handling the n equations as a global constraint, hence achieving a powerful contraction. Second it can prove rigorously the existence of solutions. However, none of these advantages can be used for under-constrained systems of equations, which have manifolds of solutions. A new framework is proposed in this paper to extend the advantages of the preconditioned interval Newton to under-constrained systems of equations. This is achieved simply by allowing domains of the NCSP to be parallelepipeds, which generalize the boxes usually used as domains.     

Co-constructing with stakeholders a role-playing game to initiate collective management of erosive runoff risks at the watershed scale

Erosive runoff is a recurring problem and is a source of sometimes deadly muddy floods in the Pays de Caux (France). The risk results from a conjunction of natural factors and human activity. Efficient actions against runoff in agricultural watersheds are well known. However they are still difficult to implement as they require co-operation between stakeholders. Local actors thus need tools to help them understand the collective consequences of their individual decisions and help to initiate a process of negotiation between them. We decided to use a participatory approach called companion modelling (ComMod), and, in close collaboration with one of the first group of local stakeholders, to create a role-playing game (RPG) to facilitate negotiations on the future management of erosive runoff. This paper describes and discusses the development of the RPG and its use with other groups of local stakeholders within the framework of two game sessions organized by two different watershed management committees. During the joint construction step, stakeholders shared their viewpoints about the environment, agents, rules, and how to model runoff in preparation for the creation of the RPG. During the RPG sessions, two groups of eight players, including farmers, mayors and watershed advisors, were confronted with disastrous runoff in a fictive agricultural watershed. Results showed that they managed to reduce runoff by 20–50% by engaging a dialogue about grass strips, storage ponds and management of the intercrop period. However, further progress is still needed to better control runoff through the implementation of better agricultural practices because, during the RPG sessions, the watershed advisors did not encourage farmers to do so. Because of the complexity of management problems, results of jointly constructing the game and the RPG sessions showed that modelling and simulation can be a very useful way of accompanying the collective learning process. This new way of working was welcomed by the participants who expressed their interest in organizing further RPG sessions.     

A knowledge base model for complex forging die machining

Recent evolutions on forging process induce more complex shape on forging die. These evolutions, combined with High Speed Machining (HSM) process of forging die lead to important increase in time for machining preparation. In this context, an original approach for generating machining process based on machining knowledge is proposed in this paper. The core of this approach is to decompose a CAD model of complex forging die in geometrical features. Technological data and topological relations are aggregated to a geometrical feature in order to create machining features. Technological data, such as material, surface roughness and form tolerance are defined during forging process and dies design. These data are used to choose cutting tools and machining strategies. Topological relations define relative positions between the surfaces of the die CAD model. After machining features identification cutting tools and machining strategies currently used in HSM of forging die, are associated to them in order to generate machining sequences. A machining process model is proposed to formalize the links between information imbedded in the machining features and the parameters of cutting tools and machining strategies. At last machining sequences are grouped and ordered to generate the complete die machining process. In this paper the identification of geometrical features is detailed. Geometrical features identification is based on machining knowledge formalization which is translated in the generation of maps from STL models. A map based on the contact area between cutting tools and die shape gives basic geometrical features which are connected or not according to the continuity maps. The proposed approach is illustrated by an application on an industrial study case which was accomplished as part of collaboration.     

Fast Object Segmentation by Growing Minimal Paths from a Single Point on 2D or 3D Images

In this paper, we present a new method for segmenting closed contours and surfaces. Our work builds on a variant of the minimal path approach. First, an initial point on the desired contour is chosen by the user. Next, new keypoints are detected automatically using a front propagation approach. We assume that the desired object has a closed boundary. This a-priori knowledge on the topology is used to devise a relevant criterion for stopping the keypoint detection and front propagation. The final domain visited by the front will yield a band surrounding the object of interest. Linking pairs of neighboring keypoints with minimal paths allows us to extract a closed contour from a 2D image. This approach can also be used for finding an open curve giving extra information as stopping criteria. Detection of a variety of objects on real images is demonstrated. Using a similar idea, we can extract networks of minimal paths from a 3D image called Geodesic Meshing. The proposed method is applied to 3D data with promising results.

Characterising and exploiting workloads of highly interactive video-on-demand

This paper presents a detailed characterisation of user behaviour for a series of interactive video experiments over a 12 month period, in which we served popular sporting and musical content. In addition to generic VCR-like features, our custom-built video-on-demand application provides advanced interactivity features such as bookmarking. The dramatic impact of such functionality on how users consume content is studied and analysed. We discuss in detail how this user behaviour can be exploited by content distributors to improve user experience. Specifically, we study how simple dynamic bookmark placement and interactivity-aware content pre-fetching and replication can reduce the impact of highly interactive media on CDN performance.     

Ahead of time static analysis for automatic generation of debugging interfaces to the Linux kernel

The Linux kernel does not export a stable, well-defined kernel interface, complicating the development of kernel-level services, such as device drivers and file systems. While there does exist a set of functions that are exported to external modules, this set of functions frequently changes, and the functions have implicit, ill-documented preconditions. No specific debugging support is provided. We present Diagnosys, an approach to automatically constructing a debugging interface for the Linux kernel. First, a designated kernel maintainer uses Diagnosys to identify constraints on the use of the exported functions. Based on this information, developers of kernel services can then use Diagnosys to generate a debugging interface specialized to their code. When a service including this interface is tested, it records information about potential problems. This information is preserved following a kernel crash or hang. Our experiments show that the generated debugging interface provides useful log information and incurs a low performance penalty.