推力矢量控制技术在导弹上的应用及发展

简要介绍了推力矢量控制技术的概念,分析了推力矢量控制的基本原理及特点.在简要分析其技术发展历程的基础上,给出了导弹推力矢量技术的现状和发展趋势.     

Impact of Aspen Log Storage with and without Protection on OSB Performance

Outdoor log storage without protection can change the mechanical and chemical properties of wood due to infection by various fungi. To understand how outdoor log storage affects the wood and, subsequently, the strandboard quality, two piles of aspen logs were set up outside and stored for a period of four months (July to November). One of the piles was treated with a biological solution to prevent fungal growth. The other one was stored without treatment. Both piles contained non-debarked and partially debarked logs. Evaluation of sap stain development indicated that all logs had been colonized by staining fungi with average stain coverage of 9.37 to 57.18% and maximum stain penetration of 3.58 to 7.27 cm over the log cross section. The variation of fungal colonization depended on log treatment and bark condition. The most effective way to prevent stain growth was the combination of biological treatment and partial debarking. A series of strandboard was prepared from fresh and aged aspen logs. All boards made from stored logs were statistically comparable to or superior to the control boards made from fresh aspen logs. The boards made from treated/partially debarked and untreated/non-debarked logs were statistically comparable to each other except for wet MOR. In addition, these two board types were statistically stronger than other boards made from treated/non-debarked and untreated/partially debarked logs in terms of IB and water resistance. Some individual stained strands were observed on the finished board surface. Less staining was found in the boards prepared from biologically treated and partially debarked logs, compared with those made from other stored logs.     

临床检验实验室自动化与实验室国际标准化认可的准备

临床检验实验室的自动化集中管理（LAS）及实验室的认可是目前临检专业讨论比较集中的问题.与传统的实验室比较分散、各自独立的分析设备相比,LAS具有集成度高,能够充分利用检验设备资源,与临床信息系统（CIS）联系更密切的特点.本文就实际临床检验中心投入的实验室集中管理系统,对其结构、流程设计、以及导入自动化系统前后实验室改造所带来的变化进行了分析.     

城市管理项目前景光明

瑞典国际发展合作署（SIDA）支持城市管理项目（UMP）有许多原因。瑞典国际发展合作署发现城市管理项目在减轻贫困、良好治理、环境、性别平等和艾滋病防治等问题上的主要观点、关注重点与其发展重点相近。     

远洋山水居住区(西区)"九年一贯制"学校

远洋山水居住区（西区）的教育优势突出，在居住区的西南角规划设计了一所36班的“九年一贯制”示范学校。其中，小学部24班，初中部12班。该学校隶属于石景山教委，主要招生服务对象为远洋山水居住区（西区）和周边社区的居民。学校占地3.6ha，总建筑面积约23800m^2。     

奥氏体锰钢轨部件的修理和装配

奥氏体锰钢是一种非常坚硬的无磁性合金钢，它的性能和大多数普遍使用的抗磨损结构钢不同。对许多轨道工程部件来说，它是一种更可取的材料。铁路辙岔和交叉处是重要的，但其它重要部件还包括开关的防护装置、铸造镶嵌件和桥式轨道部件。奥氏体锰钢承载力高，耐久性好。在冲击和负重下不会断裂。它的淬火硬化能力是最主要的一个优势。零部件表面在冲击下硬化，有些变形，但下面的母材仍保留原来的硬度。裂缝的蔓延速度非常慢。     

Dynamic responses and damages of water-filled pre-pressurized metal tube impacted by mass

An account is given of some principal observations made from a series of experiments in which three-span pipe beams were subjected to central impact by indenters with different nose shapes. These pipes were filled and pre-pressurized with water in order to identify the main effects produced by the fluid–structure interaction. In comparison, the impact experiments of the pipes with no water were also carried out. The perforation failure modes and corresponding critical impact energies were obtained in different test conditions. The experimental results indicated that the critical perforation energy and the deformation of the wall of the pipe were significantly influenced by the presence of the water and the pressure.     

影响喷气燃料与橡胶相容性的因素

采用几种具有不同初始物理性能及不同丙烯腈含量、不同硫化剂和硫化程度的丁腈橡胶，考察了其配方和物理性能对采用不同工艺条件生产的喷气燃料的相容性。结果表明，喷气燃料与橡胶的相容性不仅与喷气燃料的加工工艺有关，而且与橡胶的组成及其制备工艺有关。采用非加氢工艺生产的喷气燃料与橡胶的相容性好于采用加氢工艺(特别是加氢裂化工艺)生产的喷气燃料。橡胶材料的初始力学性能的好坏并不完全决定其与喷气燃料相容性的好坏，橡胶材料的耐过氧化物侵蚀能力才是影响相容性好坏的主要因素。橡胶的组成和其制备工艺决定了橡胶在喷气燃料中萃取物的数量和组成，不同萃取物的综合作用给相容性带来不同程度的影响。用硫作硫化剂的橡胶虽然原始强度低于用过氧化物作硫化剂的橡胶，但前者与喷气燃料的相容性却远好于后者。     

Nd3+ Doped Silicate Glass Photonic Crystal Fiber with Random Hole Distributions

The fabrication of one kind of large core area Nd3 doped silicate glass photonic crystal fiber, and demonstration of the fiber's waveguidence properties were reported. This fiber owns a random air hole distribution in the cladding. The measured minimum loss of this kind of fiber is 10 dB·m-1 at 660 nm. These fibers can sustain only a single mode at least over wavelength ranging from 660 nm to 980 nm.