油库发油过程中的HSE管理

叙述了石油库在发油过程中的HSE管理；发油过程中的危害识别，包括识别范围和内容；发油过程中风险评价的常用基本方法和常见问题；发油过程中危险源的管理控制，包括建立危险源网络图、加强现场监控和制定应急预案。     

库车坳陷中新生界天然气成藏动力学研究

库车坳陷是塔里木盆地北部一近东西走向的狭长坳陷，以中新生代地层为主。地层压实排出水离心流区位于拜城凹陷和阳霞凹陷，克拉苏-依奇克里克构造带、东秋里塔克构造带和塔北前缘隆起带为越流泄水区。库车坳陷在早第三纪-库车早期主要为油藏、凝析油气藏形成时期；库车晚期-第四纪西域期是气藏的主要形成时期。天然气经短距离侧向汇聚，通过沟通源岩和圈闭的断裂垂向富集。在强烈的构造挤压和气体充注条件下，被具有很好封闭性的下第三系膏盐岩严密封闭，形成异常高压气藏。下伏三叠系-侏罗系源岩的沉积埋藏水、粘土矿物脱出水沿断裂带伴随天然气向浅部越流，在构造顶部形成相对低矿化度的地下水化学特征。     

电磁发射兵器用电容器的选取

本文首先从理论上论述了膜电容器的储能密度与寿命之间的关系，对国际电容器制造水平和趋势进行了分析，提出采用干式金属化膜电容器作为储能元件。最后，根据电磁发射兵器整体寿命配合原则，提出高储能密度脉冲电容器的合理寿命指标。     

Ethylene polymerization over MgO‐supported zirconocene catalysts

Supported zirconcene catalysts on a new support, MgO, were prepared and tested in ethylene polymerization. Three types of impregnation methods were employed to find an optimum supporting method for MgO. The direct impregnation of Cp₂ZrCl₂ on MgO showed low metal loading and polymerization activity, while the catalyst had a higher metal loading and polymerization activity when MgO was treated with methylaluminoxane (MAO) before supporting. Treatment of MgO with MAO during the supporting step invoked two types of catalytic sites, which was evidenced by the bimodal molecular weight distribution of the polymer products. MgO is considered to have potential as a support for metallocenes.     

胡桃夹子

富于节日喜庆气氛的芭蕾舞剧《胡桃夹子》录音、录像繁多。这个伦敦科文特花园歌剧院芭蕾舞团的2000年的现场录像与其它版本比较，     

A Multilayer Optical Packet Switching Network Based on the Kautz Graph and Optical Passive Star Couplers

The multihop optical network is the most appropriate solution to satisfy the increasing applications of Internet services. This paper extends the regular Kautz graph to one with multiple layers in order to produce more architectural variations. The connectivity between adjacent layers utilizes the systematic connection patterns of a regular Kautz graph. A routing algorithm based on its property is presented. Optical passive star (OPS) couplers are adopted to implement our new topologies. Three scheduling criteria that can solve the contention problem in the intermediate nodes are evaluated and compared in terms of their capability to improve the accessibility.     

Passive alignment method of polymer PLC devices by using a hot embossing technique

A novel fabrication process using a hot embossing technique has been developed for micromechanical passive alignment of polymer planar lightwave circuit (PLC) devices. With only one step of embossing, single-mode waveguide straight channels and micropedestals for passive aligning are simultaneously defined on a polymer thin film with an accuracy of /spl plusmn/0.5 /spl mu/m. This process reduces the steps for fabricating alignment structures. A fabricated polymer PLC chip and fibers are combined on a v-grooved silicon optical bench (SiOB) in a flip-chip manner. The process provides a coupling loss as low as 0.67 dB per coupling face and a cost-effective packaging solution for various polymer PLC devices.     

High-performance MIM capacitor using ALD high-k HfO/sub 2/-Al/sub 2/O/sub 3/ laminate dielectrics

For the first time, we successfully fabricated and demonstrated high performance metal-insulator-metal (MIM) capacitors with HfO/sub 2/-Al/sub 2/O/sub 3/ laminate dielectric using atomic layer deposition (ALD) technique. Our data indicates that the laminate MIM capacitor can provide high capacitance density of 12.8 fF//spl mu/m/sup 2/ from 10 kHz up to 20 GHz, very low leakage current of 3.2 /spl times/ 10/sup -8/ A/cm/sup 2/ at 3.3 V, small linear voltage coefficient of capacitance of 240 ppm/V together with quadratic one of 1830 ppm/V/sup 2/, temperature coefficient of capacitance of 182 ppm//spl deg/C, and high breakdown field of /spl sim/6 MV/cm as well as promising reliability. As a result, the HfO/sub 2/-Al/sub 2/O/sub 3/ laminate is a very promising candidate for next generation MIM capacitor for radio frequency and mixed signal integrated circuit applications.     

土卡河电站工程及初期围堰挡水运行方式简介

介绍了土卡河水电站可研阶段通过方案比选后确定的工程规模(特征水位、装机容量)。为保证2006年底第一台机组发电,根据目前的施工进度,需要采用围堰挡水发电,文章简要介绍了第一台机组发电的运行方式。     

氨精制装置运行问题分析及改造措施

通过分析中国石油兰州石化分公司炼油厂氨精制装置存在的运行问题,提出了相应的改造措施,包括在分凝器脱液管线上新增隔离阀门、更换三级冷凝冷却器、更换氨压缩机及采用低温结晶脱硫工艺等。改造后装置运行结果表明:三级分凝器出口温度由70℃降至小于35℃,压缩机吸气量由5 m3/m in提高至74 m3/m in,原料酸性水中硫化氢质量分数下降45.5%,氨质量分数下降55.5%,净化水合格率达100%,氨精制塔塔顶温度下降5~20℃,液氨中氨质量分数由97.05%上升至99.60%,液氨产量达0.125 t/h,实现了装置的长周期运行。