Numerical Filling Simulation of Injection Molding Using Three-Dimensional Model

1 Introduction During injection moulding, the rheological response of polymer melts is generally non-Newtonian and nonisothermal with the position of the moving flow front. Because of these inherent factors, it is difficult to analyze the filling process. Therefore, simplifications usually are used. For example, in middle-plane technique and dual domain technique [1], because the most injection molded parts have the characteristic of being thin but generally of complex shape, the Hele-Shaw …     

MECHANISM OF BREAK─UP OF LIQUID DROPLETS GENERATED BY ELECTROHYDRODYNAMIC TECHNIQUE

分析了电流体动力学技术制备纳米粉的液滴破碎机理，结果表明：外加电压、电场强度、液体金属性质直接影响金属液滴的破碎程度。     

REHEATING TEMPERATURE CONTRAST AND MICROSTRUCTURES OF 7075 Al ALLOY CAST BY LIQUIDUS SEMI-CONTINUOUS CASTING

In this study, reheating of liquidus semi-continuous cast billets of 7075 Al alloy was carried out in a resistance furnace, and the temperature contrast of the outer and the center of the reheated billets was investigated, then the reheating microstructures were investigated. Results show that: the difference of temperature between the outer and center is small and the difference of their microstructures are also small. During reheating at 576℃ the spheroidization of grains is significant after 5min and no rosettes are visible after 20min by optical microscopy. Similar observations were madeon materials reheated at 596℃, but the ripening process is faster. The grains growup to 30-60μm, fine enough for thixoforming.     

THE SIMULATION OF THE SAR IMAGE OF INTERNAL SOLITARY WAVES IN ALBORAN SEA

1 .　ＩＮＴＲＯＤＵＣＴＩＯＮＯｃｅａｎｉｎｔｅｒｎａｌｗａｖｅｉｓａｋｉｎｄｏｆｇｒａｖｉｔｙｗａｖｅｇｅｎｅｒａｔｅｄｉｎｔｈｅｓｔｒａｔｉｆｉｅｄｏｃｅａｎ .Ｉｔｐｒｏｄｕｃｅｂｙｔｈｅｉｎｔｅｒａｃｔｉｏｎｏｆｔｉｄｅｃｕｒｒｅｎｔａｎｄｔｏｐｏｇｒａｐｈｙ ,ｓｅａｑｕａｋｅａｎｄｍｏｖｉｎｇｓｈｉｐｗｈｅｎｔｈｅｓｔｒｏｎｇ ,ｓｈａｌｌｏｗｐｙｃｎｏｃｌｉｎｅｉｓ ｐｒｅｓｅｎｔ.Ｔｈｅｉｎｔｅｒｎａｌｗａｖｅｓｉｎｔｈｅｃｏｎｔｉｎｅｎｔａｌｓｈｅｌｆａｒｅａｌｍｏｓｔｔｉｄｅｐｒｏｄ…     

从催化裂化柴油中分离高纯度2,6-二甲基萘

以大庆石油化工总厂炼油厂催化柴油为原料 ,通过精馏分离得到二甲基萘 (DMN)窄馏分 (2 5 8～ 2 70℃ ) ,经糠醛溶剂抽提 ,减压蒸馏后 ,在 -10～ -2 5℃冷冻 2～ 5h ,离心分离制得纯度约 80 %的粗 2 ,6 DMN ,再经无水乙醇在 -10～ -2 5℃重结晶 ,得到纯度大于等于 98%的 2 ,6 DMN。     

TiN/NbN纳米多层薄膜的交变应力场和超硬效应

为了研究纳米多层薄膜的超硬效应 ,采用反应溅射法制备从 1 4nm至 2 7nm不同调制周期的一系列TiN/NbN纳米多层膜。高分辨电子显微镜对薄膜的调制结构和界面生长方式的观察发现 ,TiN/NbN膜具有很好的调制结构 ,并呈现以面心立方晶体结构穿过调制界面外延生长的多晶超晶格结构特征。显微硬度测量表明 ,TiN/NbN纳米多层膜存在随调制周期变化的超硬效应。薄膜在调制周期为 8 3nm时达到HK39 0GPa的最高硬度。分析认为 ,两种不同晶格常数的晶体外延生长形成的交变应力场 ,对材料有强化作用 ,这是TiN/NbN纳米多层膜产生超硬效应的主要原因     

AN EXTENDED MODELING OF TIDE-WAVE MOTION

1 .　ＩＮＴＲＯＤＵＣＴＩＯＮＴｏｓｔｕｄｙｔｈｅｍｏｔｉｏｎｏｆｔｈｅｔｉｄｅ ｗａｖｅｓ,ｔｈｅｓｈａｌｌｏｗｗａｔｅｒｅｑｕａｔｉｏｎｓ ,ｉ.ｅ .ｔｈｅｖｅｒｔｉｃａｌｉｎｔｅｒｇｒａ ｔｉｏｎｏｆｔｈｅｃｏｎｔｉｎｕｉｔｙｅｑｕａｔｉｏｎａｎｄｍｏｍｅｎｔｕｍｅｑｕａ ｔｉｏｎ ,ｉｓｃｏｎｓｉｄｅｒｅｄａｓｔｈｅｇｏｖｅｒｎｉｎｇｅｑｕａｔｉｏｎｓ.Ｂｙａｂｏｖｅｅｑｕａｔｉｏｎｓｔｗｏｅｑｕａｔｉｏｎｓｒｅｌａｔｅｄｔｏｔｈｅｈｏｒｉｚｏｎ ｔａｌｆｌｕｘｏｆｔｈｅｔｉｄｅ ｃｕｒｒｅｎｔｓａ…     

GENERATION OF NONLINEAR INTERNAL WAVES ON CONTINENTAL SHELF

1 .　ＩＮＴＲＯＤＵＣＴＩＯＮＩｎｔｅｒｎａｌｔｉｄａｌｉｎｔｅｒａｃｔｉｏｎｗｉｔｈｂｏｔｔｏｍｆｅａｔｕｒｅｓａｐｐｅａｒｓｔｏｂｅｔｈｅｄｏｍｉｎａｎｔｍｅｃｈａｎｉｓｍｆｏｒｇｅｎｅｒａ ｔｉｏｎｏｆｔｈｅｃｏｈｅｒｅｎｔｏｃｅａｎｉｃｉｎｔｅｒｎａｌｗａｖｅｓｔｈａｔａｒｅｏｂｓｅｒｖａｂｌｅｗｉｔｈＳＡＲ ,ｃｌｏｓｅｒｔｏｓｈｏｒｅ ,ｒｉｖｅｒｉｎｅｏｒｇｌａｃｉａｌｉｎｔｒｕｓｉｏｎａｎｄｃｏｎｔｉｎｅｎｔａｌｂｒｅａｋｐｒｏｖｉｄｅｓｅｃ ｏｎｄａｒｙｇｅｎｅｒａｔｉｎｇｍｅｃｈａ…     

粉末冶金自润滑止推板的研究和应用

采用粉末冶金技术制备出车辆发动机涡轮增压器用自润滑止推板,研究了材料的基体强化、组织结构和摩擦磨损特性,分析了装机台架综合考核数据,并且与国际上同类产品进行比较,结果表明:该材料综合性能优于国际上同类产品,现已投入工业化生产和批量使用。     

纤维防漏增韧水泥浆应用研究

在室内进行纤维水泥防漏实验研究和纤维水泥增强增韧实验研究的基础上,进行了纤维防漏增韧水泥浆应用研究。试验中选择了低弹矿物纤维ZRF,该纤维分子链中含部分亲水基团,在一定范围较易分散,可以杂乱地分布于水泥浆中,使水泥硬化后具有显著的抗冲击性,射孔试验结果证实了纤维的这种作用。地面模拟实验结果和现场固井应用试验说明,防漏增韧水泥浆体系能够满足现场固井施工要求,既能提高水泥石韧性,又具有防漏功能,同时解决了固井过程中的水泥浆漏失和水泥石脆性的难题,有利于提高固井质量,延长油气井寿命。