In situ time-resolved X-ray diffraction of tobermorite formation in autoclaved aerated concrete: Influence of silica source reactivity and Al addition

The hydrothermal formation of tobermorite during the processing of autoclaved aerated concrete was investigated by in situ X-ray diffraction (XRD) analysis. High-energy X-rays from a synchrotron radiation source in combination with a newly developed autoclave cell and a photon-counting pixel array detector were used.To investigate the effects of the silica source, reactive quartz from chert and less-reactive quartz from quartz sand were used as starting materials. The effect of Al addition on tobermorite formation was also studied. In all cases, C-S-H, hydroxylellestadite and katoite were clearly observed as intermediates.Acceleration of tobermorite formation by Al addition was clearly observed. However, Al addition did not affect the dissolution rate of quartz. Two pathways, via C-S-H and katoite, were also observed in the Al-containing system. These results suggest that the structure of initially formed C-S-H is important for the subsequent tobermorite formation reactions.     

Rate of swelling of sodium polyacrylate

The kinetics of the swelling of sodium polyacrylate (NaPA), a hydrophilic polymer, was studied gravimetrically, by microscopic observation, and calorimetrically. The swelling process followed first-order kinetics and the rate constant was of the order of 10^?2 s^?1. The gravimetric method, however, was not useful for kinetic studies. The rate constant was depressed by the addition of sodium chloride. The activation energy of the swelling was 46.0 ± 6.2 (kJ mol^?1) and decreased with the increase in sodium chloride concentration. In acid solution, the activation energy was almost the same as that in water. The heat of the swelling was 196 ± 17 J g^?1 and did not vary with the addition of sodium chloride. © 1993 John Wiley & Sons, Inc.     

Quantitative source identification of dioxin-like PCBs in Yokohama, Japan, by temperature dependence of their atmospheric concentrations

The source and environmental behavior of dioxin-like polychlorinated biphenyls (PCBs) together with other PCBs and polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDDs/PCDFs) were evaluated based on analysis of variations in their atmospheric concentrations in Yokohama, Japan. Potential factors responsible for variations in the atmospheric concentrations of the congeners were investigated by principal component analysis and multiple regression analysis of the data. Two major variations were seen: one had strong temperature dependence, while the other had no significant temperature dependence. A possible explanation for this difference is that the former is related to congeners released by volatilization (e.g., volatilization from commercial PCB products and past polluted environments), while the latter is related to congeners emitted from thermal processes. The relative contributions of dioxin-like PCBs released by volatilization and those emitted from thermal processes were estimated based on the temperature dependence of the atmospheric concentrations. The results suggest that both dioxin-like PCBs emitted from thermal processes and those released by volatilization are significant sources of air pollution in this area in terms of the toxic equivalent (TEQ) for dioxin-like PCBs. We demonstrated that the present approach based on variations in atmospheric concentrations can be useful in providing a qualitative as well as quantitative understanding of source information.     

β-phase transformation and thermoelectric power in FeSi2 and Fe2Si5 based alloys containing small amounts of Cu

The effects of Cu addition on the β phase formation rate and the thermoelectric power in various FeSi₂ and Fe₂Si₅ based alloys was examined. The peritectoid reaction (a+→β) in FeSi₂ alloys was initially enhanced by the addition of Cu but it became slower for longer annealing times. The retained metallic ε was harmful for the thermoelectric power. The inherent thermoelectric properties of (FeSi₂)_99−XMn₁Cu_X (X=0–1.O at.%), (FeSi₂)_99−X Co₁Cu_X (X=0–1.0 at.%) alloys were attained after the elimination of ε. In the case of eutectoid reaction (→β+Si). Differential thermal analysis, X-ray diffraction and microscopic observation clearly confirmed that the eutectoid reaction rate was drastically enhanced by the addition of a small amount of Cu and its rate decreased with decreasing Cu content. The rate also depends on the annealing temperature and reached a maximum at about 1073 K for most alloys. The addition of only 0.1 at.% Cu was still very effective even in Mn or Co doped alloys. The thermoelectric power of these alloys increased very quickly with annealing time. Their final values decreased with Cu content and saturated at 0.2 at.% Cu. The value of the 0.1 at.% Cu added alloy was higher than that of both the conventional p- and a-type FeSi₂ based alloys. These results suggest that the Fe₂Si₅ alloys with a small amount of Cu may be attractive as new thermoelectric materials.     

Properties of copolyimides prepared from different tetracarboxylic dianhydrides and diamines

Various copolymides were prepared from two acid dianhydrides (BPDA, 3,3′,4,4′-biphenyl tetracarboxylic dianhydride; PMDA, pyromelitic dianhydride) and two diamines (PPD, p-phenylene diamine; ODA, 4,4′-oxydianiline). The thermal and mechanical properties of these polyimides were examined in detail. By appropriately selecting the ratios of the acid dianhydride component and the diamine component, polyimide films having desirable mechanical and thermal characteristics can be obtained. Further, it was proved that there is a correlation between the properties and the compositions of the copolyimides and that the properties could be estimated from the compositions by the use of multiple regression analysis. © 1996 John Wiley & Sons, Inc.     

Influence of Cu metal on the domain structure and carrier mobility in single-layer graphene

We demonstrate that domain structure of single-layer graphene grown by ambient pressure chemical vapor deposition is strongly dependent on the crystallinity of the Cu catalyst. Low energy electron microscopy analysis reveals that graphene grown using a Cu foil gives small and mis-oriented graphene domains with a number of domain boundaries. On the other hand, no apparent domain boundaries are observed in graphene grown over a heteroepitaxial Cu(111) film deposited on sapphire due to unified orientation of graphene hexagons. The difference in the domain structures is correlated with the difference in the crystal plane and grain structure of the Cu metal. The graphene film grown on the heteroepitaxial Cu film exhibits much higher carrier mobility than that grown on the Cu foil.