A videogrammetric as-built data collection method for digital fabrication of sheet metal roof panels

A roofing contractor typically needs to acquire as-built dimensions of a roof structure several times over the course of its build because a structure is never built to the exact drawing dimensions. In the construction phase and in order to digitally fabricate sheet metal roof panels, the contractor has to measure end-to-end dimensions of boundaries of every roof plane with a certain level of accuracy (i.e., errors less than ±2 cm). This is necessary to be able to cut sheet metal coil such that different pieces perfectly fit together. Obtaining these measurements using the exiting roof surveying methods could be costly in terms of equipment, labor, and/or worker exposure to safety hazards. This paper presents a video-based surveying framework as an alternative method which is simple to use, automated, less expensive, and safe. When using this framework, the contractor collects video streams with a calibrated stereo camera set. The captured data is processed to automatically generate a 3D wire-diagram of the target roof. Measurements from the wire-diagram are saved in a digital file (XML format) which could be loaded into an on-site sheet metal folding and cutting machine. Experimental analyses demonstrate applicability of the proposed framework.     

Synthesis and evaluation of some novel additives as antioxidants and corrosion inhibitors for petroleum fractions

Benzoxazinone 2 was prepared and reacted with formamide,acetamide,some primary aromatic amines and heterocyclic amines giving the corresponding quinazolone derivatives 3-15 respectively.The reaction of benzoxazinone 2 with hydrazine hydrate and phenyl hydrazine was also studied.Representative compounds of the synthesized products were evaluated as antioxidants and corrosion inhibitors for gasoline engine lubricating oil.The highest antioxidant activities were obtained with compounds 10-15.The optimum concentration recommended for these new additives was found to be 0.lg for 1L ofoil for compounds 13-15.In addition,some of the highly effective antioxidant additives,namely 10-15,were thermally analyzed by using thermogravimetric analysis （TGA） and differential thermal gravimetric analysis （DTGA） techniques and the results indicated that compounds are thermally stable and could be used under thermal conditions.Moreover,a comparison of the oxidation stability between the tested oil containing the prepared products and lubricating oil containing commercial additives was also studied.     

Brown tumors in dialyzed patients with secondary hyperparathyroidism: Report of 16 cases

Brown tumors (BTs) are relatively uncommon but they are serious complications of renal osteodystrophy. The objective of this study was to analyze the clinical, biological, and radiological characteristics of 16 patients with BTs provoked by secondary hyperparathyroidism (sHPT) and its response to the decrease in parathyroid hormone levels after parathyroidectomy (PTX). The management of that uncommon condition was also reviewed. We conducted a retrospective study including 16 end‐stage renal disease patients who underwent subtotal PTX between 1997 and 2007 for severe sHPT with BTs. Our study included 10 men and 6 women, whose average age was 34 years. All patients were on dialysis. Ten of them were on dialysis for more than 5 years. The median duration on dialysis was 84 months. Patients included suffered from swellings associated with functional limitations. BTs had multiple locations in 7 patients. Jaw was the most frequent location (62%). Radiography and tomodensitometry demonstrated a mixed radio lucent and radio‐opaque lesions with an expansion of the cortical bone. Bone scan demonstrated an increased uptake of lesions. Chirurgical treatment was indicated in all cases because of severe refractory sHPT with functional limitations and/or disfiguring deformities. In all cases, BTs stopped its progression and even decreased in size. However, it was insufficient in four cases, which required a surgical resection. PTX remains an efficacious approach in resistant cases of sHPT with persistent BTs.     

Tartaric Acid as a Non-toxic and Environmentally-Friendly Anti-scaling Material for Using in Cooling Water Systems: Electrochemical and Surface Studies

Because of the major limitations in drinking water resources, the industries need to use unprocessed water sources for their cooling systems; these water resources contain major amount of hardening cations. So, mineral scales are formed in cooling water systems during the time and cause major problems. The use of green anti-scaling materials such as carboxylic acids is considered due to their low risks of environmental pollution. In the present work, the scale inhibition performance of tartaric acid as a green organic material was evaluated. Chemical screening tests, cathodic and anodic voltammetry measurements and electrochemical impedance spectroscopy (EIS), field emission scanning electron microscopy (FESEM), energy-dispersive x-ray and x-ray diffraction, were used for the evaluation of the scale inhibition performance. The results showed that tartaric acid can prevent calcium carbonate precipitation significantly. The hard water solution with 2.0 mM of tartaric acid indicated the highest scale inhibition efficiency (ca. 68%). The voltammetry, EIS and FESEM results verified that tartaric acid can form smooth and homogeneous film on steel surface through formation of Fe(III)-tartrate complexes and retard the local precipitation of calcium carbonate deposits.     

Protective properties of PPy‐Au nanocomposite coatings prepared by sonoelectrochemisty and optimized by the Taguchi method

The polypyrrole (PPy) and polypyrrole‐Au (PPy‐Au) nanocomposite films have been sonoelectrochemically synthesized on St‐12 steel electrodes using the galvanostatic technique. Experimental design according to the Taguchi method has been applied to optimize the factors on the synthesis of PPy‐Au nanocomposite coating. Three factors were used to design an orthogonal array L9: Synthesis time (t), Current density (I), and Concentration of HAuCl₄ (C). The synthesized Au nanoparticles during polymerization were characterized by Ultraviolet–visible (UV‐visible) spectroscopy. Characterization of the surfaces was done by scanning electron microscope (SEM), energy dispersive X‐ray spectrum (EDX), and atomic force microscope (AFM). The scanning electron microscopy (SEM) image of PPy shows a smooth surface while PPy‐Au nanocomposite film has a compact morphology. Moreover, energy dispersive X‐ray spectrum (EDX) is evidence for the incorporation of Au nanoparticles. The corrosion protection of coatings was investigated by open circuit potential (OCP) time trends, potentiodynamic polarization technique, and electrochemical impedance spectroscopy (EIS) in a NaCl 3.5% solution. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41087.     

Study on compatibility of recycled polypropylene/high-density polyethylene blends using rheology

The compatibilization of recycled polypropylene (PP) and high-density polyethylene (HDPE) was studied using two types of compatibilizers: 5 wt% PP-grafted-maleic anhydride (5 wt% MAPP) and 5 wt% HDPE-grafted-maleic anhydride (5 wt% MAHDPE), using a cone and plate rheometer. Maleic anhydride (MAH) was grafted onto PP or HDPE via peroxide initiated melt grafting technique. Blends containing highest amount of pure HDPE exhibited maximum values for tensile strength, complex viscosity, dynamic and loss modulus compared to similar blends developed using recycled HDPE. The latter properties of all the compatibilized blends were higher compared to that of uncompatibilized blends. Studies on rheology of the pure and recycled polymer and its compatibilized blends have thrown some light on the molecular weight distribution of these materials. High shear yielding characteristics were noted for MAHDPE compatibilized blends containing high percentage of HDPE. Scanning electron microscopy showed that blends containing a high percentage of HDPE and HDPE based compatibilizer exhibit a dispersed morphology. Fourier transform infrared spectrometer characterization was conducted to check if compatibilization occurred between recycled PP and HDPE.     

Fatty acid accumulation in the different fractions of the developing corn kernel

In the food industry, the use of the oil is determined by the composition of fatty acids, and this is highly dependent on its natural origin. The fatty acid composition of whole corn kernel was determined in three varieties of corn (Astro, GH2547, and Local). Linoleic acid was the predominant fatty acid in the oil of Astro and Local at all collection dates, whereas it was the major fatty acid in the oil of GH2547 only between 40 and 60 days after pollination (DAP). The fatty acid accumulation in the endosperm, pericarp and germ fractions of the corn kernel during maturation was determined. The accumulation pattern of oil content was different in these three kernel fractions. The highest levels of oil content in the endosperm (2.2%), germ (34.3%) and pericarp (10.8%) fractions were detected at 20, 40 and 30 (DAP), respectively. The fatty acid accumulation patterns were different amongst the analysed kernel parts, indicating a numerous differences between the three corn kernel parts. Throughout the sampling periods, the endosperm fraction was distinguished by the highest and the lowest levels of oleic and linoleic acids, respectively. At all stages of kernel development, the pericarp fraction had the highest levels of total polyunsaturated fatty acids, which has numerous healthy applications. These results may be useful in the understanding of the potential source of the beneficial unsaturated fatty acids amongst the different fractions of the corn kernel during maturation.     

A tungsten-trioxide/prussian blue complementary electrochromic cell with a polymer electrolyte

Optically variable windows (smart windows), which control the transmission of light into buildings and vehicles, are of interest both for the control of solar heat load and for privacy applications. Such windows are likely to utilize electrochromic technology to achieve optical control. An electrochromic device consisting of a cathodically colouring tungsten trioxide (WO₃) film, an anodically colouring Prussian blue (PB) film, and a polymer electrolyte was made. The polymer electrolyte was prepared from polyvinyl alcohol doped with H₃PO₄ and KH₂PO₄ to accommodate the conduction of both H⁺ and K⁺ ions. The electrochromic WO₃ and PB films functioned in a complementary way such that the device was coloured or bleached by the application of –0.5 V or +0.5 V (WO₃ films vs PB film), respectively. The spectral characteristics of the coloured device confirmed the complementary colouration of WO₃ and PB in the device.     

Copper activated LiF nanorods as TLD material for high exposures of gamma-rays

Lithium fluoride (LiF) doped with proper activators is a highly sensitive phosphor commonly used for radiation dosimetry using thermoluminescence (TL) technique. Nanorods of this material activated with Cu, Mg and P as single dopants are synthesized in our laboratory and exposed to gamma-rays for their thermoluminescence (TL) properties. The induced TL glow curves of the Cu, Mg and P doped samples are similar with a single peak at 410 K. Copper doped sample is found to be the most sensitive sample with TL intensity around 65, 7 and 8 times of those of LiF:Mg, LiF:P and LiF:Mg,Cu,P, respectively, indicating that Cu is the luminescence center in the host of LiF nanorods, while Mg and P act as TL quencher particularly when used as codopants. These observations on the nanostructured form of LiF doped with these activators are entirely different from those of the widely studied LiF:Mg,Cu,P and LiF:Mg,Ti single crystals. The nanorods of LiF:Cu might be used for heavy doses measurement as they are sensitive to gamma-rays and have a linear TL response curve in a long span of exposures.     

Multi-Prandtl correlating equations for free convection heat transfer from a horizontal tube of elliptic cross-section

Steady laminar free convection from a horizontal elliptic cylinder set in unbounded space is studied numerically under the assumption of uniform surface temperature. A specifically developed computer-code based on the SIMPLE-C algorithm is used for the solution of the mass, momentum and energy transfer governing equations. Simulations are performed for ratios between the minor and major axes of the elliptic cross-section of the cylinder in the range between 0.05 and 0.98, inclination angles of the major axis of the elliptic cross-section with respect to gravity in the range between 0° and 90°, Rayleigh numbers based on the major axis of the elliptic cross-section in the range between 10 and 10⁷, and Prandtl numbers in the range between 0.7 and 700. It is found that the heat transfer rate increases with increasing the Rayleigh and Prandtl numbers, while decreases with increasing the orientation angle of the cross-section of the cylinder, i.e., passing from the slender to the blunt configuration. In addition, a noteworthy fact is that in most cases the amount of heat exchanged at the cylinder surface has a peak at an optimum axis ratio which is practically independent of the Prandtl number, while may either increase or decrease with increasing the Rayleigh number depending on whether the orientation angle of the tube is above or below a critical value of approximately 67.5°. Dimensionless correlating equations are proposed both for the optimum axis ratio for maximum heat transfer and for the heat transfer rate from the cylinder surface to the undisturbed surrounding fluid reservoir.