分布式光纤拉曼放大器的增益平坦设计

介绍了在波分复用（WDM）系统中分布式光纤拉曼放大器（FRA）的理论分析模型。在此基础上，对增益平坦设计所需考虑的因素进行了分析；最后通过试验证明了它的有效性。     

Analysis of 24,444 surgical specimens accessioned over 55 years in an ophthalmic pathology laboratory

PURPOSE: To summarize the pathologic diagnoses of a large number of surgically-obtained specimens over an extended time period in a single ophthalmic pathology laboratory. METHODS: We analyzed the records of 24,444 surgically obtained specimens accessioned in the L.F. Montgomery Ophthalmic Pathology Laboratory, Emory University, Atlanta, GA between May 1941 and December 1995. Age, sex, topography, clinical procedure, and histologic diagnosis were entered into a database using the modified SNOMED coding system. The diagnosis of the surgically enucleated eyes were analyzed with respect to years of enucleation. RESULTS: The most common topographic area associated with a histologic diagnosis was the cornea (39.3%), followed by lens (16.0%), vitreous (12.0%), uvea (9.8%), eyelids (8.0%), conjunctiva (7.7%), retina (7.7%), and orbit (2.1%). The relative proportion of vitreous specimens has continuously increased and became the most common surgical specimen in 1995. The most common underlying disease of surgically enucleated eyes is trauma (40.9%), followed by ocular neoplasia (24.2%), 'surgical' diseases of the cornea, lens and retina including glaucoma (17.3%), vascular diseases (6.7%), and inflammatory conditions (6.7%). The relative frequency of trauma and ocular inflammation as a cause of enucleation decreased significantly (p < 0.05) over the time of the study period while the relative proportion of ocular neoplastic processes increased (p < 0.0001). CONCLUSIONS: The availability of new surgical techniques has caused a change in the relative frequencies of different ocular specimens submitted for histologic examination.     

一种多晶硅高温压力传感器

制作压力传感器时，在二氧化硅层上淀积多晶硅膜，既可利用优良的机械特性，又可保证压敏电阻与衬底间具有良好的绝缘性，由此可大大提高器件的温度特性。介绍了一种多晶硅压力传感器的原理和设计。实验结果表明，这类传感器具有灵敏度好，精度高等特点，电路工作范围为０－２５０℃，且具有良好的温度稳定性。     

参数化图形库技术

本文论述了参数化图形库的实现原理，建立了以尺寸叠加算法为基础的参数化图形库开发工具，利用这种开发工具建立的图形数据可以由数据库管理，方便有效。     

超声波车辆车轴探头的研制与应用

提出了一种用于检测在役车辆车轴产生疲劳裂纹的超声波方法,设计了中心孔探头与斜角探头一起,完成了对车辆车轴的关键区域探伤。     

预处理工艺对硬质合金与金刚石膜间粘结力的影响

在两种经不同预处理的硬质合金YG8基底上，采用微波等离子体化学气相沉积法，在微波功率2kW，压强4.0kPa和6.5kPa，CH4和H2流量分别为1.6cm/s和100.0cm/s的条件下生长金刚石薄膜。利用X射线衍射检测了金刚石薄膜是否存在，用拉曼光谱分析了薄膜的质量，用金相显微镜观察了薄膜的洛氏硬度压痕，标定并比较了不同预处理工艺膜与基底的结合力。实验结果表明，不同的预处理方法对于粘结力的影响不大，最主要的因素是钴含量的多少。     

Quantitative prediction of the degree of pollution of effluent from reactive dye mixtures

By using mathematical formulae developed in previous studies, certain pollution parameters of dye effluent obtained from reactive dyeing with a single dye can be predicted with good accuracy. In this study, the degree of pollution of reactive dyeing effluent using dye mixtures was also predicted by other approaches, such as linear and non-linear regression. The prediction accuracy was found to be satisfactory.     

新世纪我国压铸业与国际接轨的思考

针对中国压铸行业的现状和存在的问题 ,以及当前的机遇和面临的挑战 ,论述了中国压铸工业进入 2 1世纪所面临的新形势及应采取的对策     

大颗粒尿素造粒工艺简介

介绍了大颗粒尿素造粒工艺，着重介绍了荷兰NSM公司的流化床造粒技术和法国K－T公司的流化床转鼓造粒（FDG）技术。     

一种支持QoS的拓扑自适应动态组播路由算法

YAM、QoSMIC、DSDMR等一类支持QoS的动态组播路由算法允许组播成员动态地加入和离开，同时为接收方提供多个可选择的组播接入路径，以满足不同应用的QoS需求。但这些算法普遍存在控制信令开销大和结点加入时延长，可扩展性不好等问题。本文在分析这些算法的基础上，提出改进的支持QoS的动态组播路由算法，即拓扑自适应动态组播路由（Topology Adaptive Dynamic Multicast Routing，TADMR）算法。该算法避免了以往算法中大部分盲目的路径搜索，并使结点加入时延不再受限于固定的等待时钟，而与网络拓扑相自适应。性能分析和仿真结果表明，该算法具有较低的控制信令开销和结点加入时延，适用于各种网络规模和群组规模，具有良好的可扩展性。