Engineering the temporal response of photoconductive photodetectors via selective introduction of surface trap states

Photoconductive photodetectors fabricated using simple solution-processing have recently been shown to exhibit high gains (>1000) and outstanding sensitivities ( D* > 10(13) Jones). One ostensible disadvantage of exploiting photoconductive gain is that the temporal response is limited by the release of carriers from trap states. Here we show that it is possible to introduce specific chemical species onto the surfaces of colloidal quantum dots to produce only a single, desired trap state having a carefully selected lifetime. In this way we demonstrate a device that exhibits an attractive photoconductive gain (>10) combined with a response time ( approximately 25 ms) useful in imaging. We achieve this by preserving a single surface species, lead sulfite, while eliminating lead sulfate and lead carboxylate. In doing so we preserve the outstanding sensitivity of these devices, achieving a specific detectivity of 10(12) Jones in the visible, while generating a temporal response suited to imaging applications.     

Sensitive solution-processed Bi2S3 nanocrystalline photodetectors

Solution-processed nanocrystal optoelectronic devices offer large-area coverage, low cost, and compatibility with a wide range of substrates. Recently, photodetectors and photovoltaics based on spin-coated nanoparticle films have shown tremendous progress in performance. However, high-performance devices reported to date have employed either Pb or Cd, raising concerns regarding environmental impact and regulatory acceptance. Herein we report a high-performance solution-processed photodetector based instead on Bi2S3 nanocrystals. The devices exhibit photoconductive gain on the order of 10 combined with temporal response on the 10 ms time scale. The resultant solution-processed Bi2S3 nanorod photoconductive photodetectors are of interest in visible and near-infrared (NIR) wavelength applications requiring video-frame-rate temporal response.     

Size Effects of Platinum Nanoparticles in the Photocatalytic Hydrogen Production Over 3D Mesoporous Networks of CdS and Pt Nanojunctions

Catalysts for the photogeneration of hydrogen from water are key for realizing solar energy conversion. Despite tremendous efforts, developing hydrogen evolution catalysts with high activity and long‐term stability remains a daunting challenge. Herein, the design and fabrication of mesoporous Pt‐decorated CdS nanocrystal assemblies (NCAs) are reported, and their excellent performance for the photocatalytic hydrogen production is demonstrated. These materials comprise varying particle size of Pt (ranging from 1.8 to 3.3 nm) and exhibit 3D nanoscale pore structure within the assembled network. Photocatalytic measurements coupled with UV–vis/NIR optical absorption, photoluminescence, and electrochemical impedance spectroscopy studies suggest that the performance enhancement of these catalytic systems arises from the efficient hole transport at the CdS/electrolyte interface and interparticle Pt/CdS electron‐transfer process as a result of the deposition of Pt. It is found that the Pt‐CdS NCAs catalyst at 5 wt% Pt loading content exerts a 1.2 mmol h^?1 H₂‐evolution rate under visible‐light irradiation (λ ≥ 420 nm) with an apparent quantum yield of over 70% at wavelength λ = 420 nm in alkaline solution (5 m NaOH), using ethanol (10% v/v) as sacrificial agent. This activity far exceeds those of the single CdS and binary noble metal/CdS systems, demonstrating the potential for practical photocatalytic hydrogen production.     

Charge transport mechanisms and memory effects in amorphous TaNx thin films

Amorphous semiconducting materials have unique electrical properties that may be beneficial in nanoelectronics, such as low leakage current, charge memory effects, and hysteresis functionality. However, electrical characteristics between different or neighboring regions in the same amorphous nanostructure may differ greatly. In this work, the bulk and surface local charge carrier transport properties of a-TaN_x amorphous thin films deposited in two different substrates are investigated by conductive atomic force microscopy. The nitride films are grown either on Au (100) or Si [100] substrates by pulsed laser deposition at 157 nm in nitrogen environment. For the a-TaN_x films deposited on Au, it is found that they display a negligible leakage current until a high bias voltage is reached. On the contrary, a much lower threshold voltage for the leakage current and a lower total resistance is observed for the a-TaN_x film deposited on the Si substrate. Furthermore, I-V characteristics of the a-TaN_x film deposited on Au show significant hysteresis effects for both polarities of bias voltage, while for the film deposited on Si hysteresis, effects appear only for positive bias voltage, suggesting that with the usage of the appropriate substrate, the a-TaN_x nanodomains may have potential use as charge memory devices.     

Adsorption of dyes on Sahara desert sand

Sahara desert sand (SaDeS) was employed as a mineral sorbent for retaining organic dyes from aqueous solutions. Natural sand has demonstrated a strong affinity for organic dyes but significantly lost its adsorption capacity when it was washed with water. Therefore, characterization of both natural and water washed sand was performed by XRD, BET, SEM and FTIR techniques. It was found that water-soluble kyanite, which is detected in natural sand, is the dominant factor affecting adsorbance of cationic dyes. The sand adsorbs over 75% of cationic dyes but less than 21% for anionic ones. Among the dyes studied, Methylene Blue (MB) demonstrated the strongest affinity for Sahara desert sand (Q_e = 11.98 mg/g, for initial dye solution concentration 3.5 × 10⁻⁵ mol/L). The effects of initial dye concentration, the amount of the adsorbent, the temperature and the pH of the solution on adsorption capacity were tested by using Methylene Blue as model dye. Pseudo-first-order, pseudo-second-order and intraparticle diffusion models were applied. It was concluded that adsorption of Methylene Blue on Sahara desert sand followed pseudo-second order kinetics. Gibbs free energy, enthalpy change and entropy change were calculated and found −6411 J/mol, −30360 J/mol and −76.58 J/mol K, respectively. These values indicate that the adsorption is an exothermic process and has a spontaneous nature at low temperatures.     

The EPH/Ephrin System in Gynecological Cancers: Focusing on the Roots of Carcinogenesis for Better Patient Management

Gynecological cancers represent some of the most common types of malignancy worldwide. Erythropoietin-producing hepatocellular receptors (EPHs) comprise the largest subfamily of receptor tyrosine kinases, binding membrane-bound proteins called ephrins. EPHs/ephrins exhibit widespread expression in different cell types, playing an important role in carcinogenesis. The aim of the current review was to examine the dysregulation of the EPH/ephrin system in gynecological cancer, clarifying its role in ovarian, endometrial, and cervical carcinogenesis. In order to identify relevant studies, a literature review was conducted using the MEDLINE and LIVIVO databases. The search terms ephrin, ephrin receptor, ovarian cancer, endometrial cancer, and cervical cancer were employed and we were able to identify 57 studies focused on gynecological cancer and published between 2001 and 2021. All researched ephrins seemed to be upregulated in gynecological cancer, whereas EPHs showed either significant overexpression or extensive loss of expression in gynecological tumors, depending on the particular receptor. EPHA2, the most extensively studied EPH in ovarian cancer, exhibited overexpression both in ovarian carcinoma cell lines and patient tissue samples, while EPHB4 was found to be upregulated in endometrial cancer in a series of studies. EPHs/ephrins were shown to exert their role in different stages of gynecological cancer and to influence various clinicopathological parameters. The analysis of patients’ gynecological cancer tissue samples, most importantly, revealed the significant role of the EPH/ephrin system in the development and progression of gynecological cancer, as well as overall patient survival. In conclusion, the EPH/ephrin system represents a large family of biomolecules with promising applications in the fields of diagnosis, prognosis, disease monitoring, and treatment of gynecological cancer, with an established important clinical impact.     

Visually exploring movement data via similarity-based analysis

Data analysis and knowledge discovery over moving object databases discovers behavioral patterns of moving objects that can be exploited in applications like traffic management and location-based services. Similarity search over trajectories is imperative for supporting such tasks. Related works in the field, mainly inspired from the time-series domain, employ generic similarity metrics that ignore the peculiarity and complexity of the trajectory data type. Aiming at providing a powerful toolkit for analysts, in this paper we propose a framework that provides several trajectory similarity measures, based on primitive (space and time) as well as on derived parameters of trajectories (speed, acceleration, and direction), which quantify the distance between two trajectories and can be exploited for trajectory data mining, including clustering and classification. We evaluate the proposed similarity measures through an extensive experimental study over synthetic (for measuring efficiency) and real (for assessing effectiveness) trajectory datasets. In particular, the latter could serve as an iterative, combinational knowledge discovery methodology enhanced with visual analytics that provides analysts with a powerful tool for “hands-on” analysis for trajectory data.     

Models of computation for reactive control of autonomous mobile robots

The paper studies computation models for tasks performed by autonomous mobile robots. Such tasks can be accomplished by reactive control algorithms. Reactive control systems can be described using different models of computation which have as distinguishing feature the abstraction level of time. Thus, three computation models are defined: the untimed model, the synchronous model and the timed model. It is shown that the clocked-synchronous model of computation is more appropriate for describing the controller for a parallel parking task.