Interfacial segregation of Ti in the brazing of diamond grits onto a steel substrate using a Cu-Sn-Ti brazing alloy

Diamond grits were brazed onto a steel substrate using a prealloyed Cu-10Sn-15Ti (wt pct) brazing alloy at 925 °C and 1050 °C. Due to the relatively high concentration of Ti in the brazing alloy, the braze matrix exhibited a composite structure, composed of β-(Cu,Sn), a Cu-based solid solution, and various intermetallic compounds with different morphologies. The reaction of Ti with diamond yielded a continuous TiC layer on the surfaces of the diamond grits. On top of the TiC growth front, an intermetallic compound, composed of Sn and Ti, nucleated and grew into a randomly interwoven fine lacey structure. An interfacial structure developed as the interwoven fine lacey phase was semicoherently bonded to the TiC layer, with the Cu-based braze matrix filling its interstices. The thickness of such a composite layer was increased linearly with the square root of isothermal holding time at 925 °C, complying with the law of a diffusion-controlled process. However, at 1050 °C, the segregation behavior of Ti and Sn to the interfaces between the TiC layer and the braze matrix diminished, due to the increased solubility of Ti in the Cu-based liquid phase. The enhanced dissolution of Ti in the Cu-based liquid phase at 1050 °C also caused the precipitation of rod-like CuTi with an average diameter of about 0.2 μm during cooling. SnTi₃ was the predominant intermetallic compound and existed in three different forms in the braze matrix. It existed as interconnected grains of large size which either floated to the surface of the braze matrix or grew into faceted grains. It also exhibited a nail-like structure with a mean diameter of about 1 μm for the rod section and a lamellar structure arising from a eutectic reaction during cooling.     

新型高k栅介质材料研究进展

随着半导体技术的不断发展，MOSFET（metal-oxide-semiconductor field effect transistor）的特征尺寸不断缩小，栅介质等效氧化物厚度已小至nm数量级。这时电子的直接隧穿效应将非常显著，将严重影响器件的稳定性和可靠性。因此需要寻找新型高k介质材料，能够在保持和增大栅极电容的同时，使介质层仍保持足够的物理厚度来限制隧穿效应的影响。本文综述了研究高k栅介质材料的意义；MOS栅介质的要求；主要新型高k栅介质材料的最新研究动态；展望了高k介质材料今后发展的主要趋势和需要解决的问题。     

塑料挤出型材车间公用工程设计

鉴于当今人们对塑料门窗需求量的增大，通过对5个塑料挤出型材车间的设计，将其公用工程设计整理成文，总结出塑料挤出型材车间的采暖通风设计，压缩空气系统设计，制冷系统设计的较详尽的方案，以供有关设计技术人员参考。     

The Synthesis of Sulfated Titanium Oxide Nanotubes

TiO₂ nanotubes can be prepared in gram quantities by treating anatase TiO₂ powder with concentrated NaOH solution. These TiO₂ nanotubes acquired strong acidity after being impregnated with sulfuric acid solution and calcined at 300 °C. The anatase TiO₂ powder used to prepare the nanotube did not catalyze the esterification between cyclohexanol and acetic acid, while sulfated TiO₂ nanotubes were very reactive toward the esterification reaction.     

Improvement of RCA transistor using RTA annealing after theformation of interfacial oxide

A polysilicon emitter RCA transistor (an ultra-thin interfacial oxide layer exists between polysilicon and silicon emitter) is presented which can operate at 77 K for the first time. An ultra-thin (1.5 nm) interfacial oxide layer is grown deliberately between polysilicon and silicon emitter using RCA oxidation and excellent device stability is obtained after rapid thermal annealing (RTA) treatment in nitrogen atmosphere. The RCA transistor exhibits good electrical performance at very low temperature for an emitter area of 3 × 8 μm². The maximum toggle frequency of a 1:2 static divider is 1.2 GHz and 732 MHz at 300 K and 77 K, respectively     

数字化制模新技术

数字化制模技术是将三维CAD模型直接转化成为铸造用模的新技术。文中介绍了华中科技大学开发的HRP系列数字化制模技术的原理及制模工艺。与传统制模方法相比 ,具有制模速度快、精度高、质量好、价格便宜等优点。文中还以制作轿车制动器卡钳体模样、搅拌叶片模样、蜗壳凸样为例说明了运用数字化制模新技术的优点     

I/OIMAGESYSTEM微波中继应用

微波中继的应用非常广泛 ,目前在二维、三维施工中跨越障碍物时 ,一般都使用微波中继站来传输命令和数据。文章就微波中继及I/OIMAGESYSTEM“蛇形排列”先进功能的实际应用进行了详细的阐述 ,同时提出了使用微波中继站应注意的问题。     

永定新河治理工程几个关键问题的研究

永定新河是天津市防洪的北部防线。由于受海相来沙淤积 ,河道行洪能力大幅度下降。针对永定新河治理工程设计中涉及到的河道淤积治理方案、闸位比选、防潮闸结构型式及施工方法、闸下减淤清淤措施等诸多问题进行了分析和研究 ,提出了相应的措施和建议     

Parameters evaluation of SOLA algorithm for time scale modification

Successful operation of the Synchronous Overlap and Add (SOLA) algorithm for Time Scale Modification (TSM) of speech is closely tied to the proper choice of parameters. This paper investigates the quality of time scale modified speech under different values of primary parameters. Based on Mean Opinion Score (MOS) tests and Bark Spectral Distortion (BSD) measure, the proper choices of synthesis shift (Ss) and the duration of the shift search interval (K _max?) are given experimentally. The conclusions can be helpful for operating the SOLA algorithm for time scale modification of speech.     

A general framework for debugging

The state of the art of debugging is examined. A debugged process model that serves as the basis of a general debugging framework is described. The relationship of the model to traditional debugging processes and support tools is discussed. A minimal set of requirements for a general debugging framework is described in terms of both the theory behind debugging methodologies and the support tools. An execution monitor, Eden, that serves as a debugging tool within this general framework is described