基于三维模型的飞机红外图像仿真研究

要对红外成像制导导弹攻击飞机的过程进行仿真,需要生成目标飞机的红外图像。当飞机受到导弹攻击时会采取各种机动动作进行规避,这就使导引头所探测到的图像随着弹目距离、飞机姿态而变化,所生成的红外图像必需能够反应这种变化。文章首先根据能量守恒定律和黑体辐射定律,并综合考虑了大气透过率、光学系统透过率和探测器响应率的影响,推导了导引头探测器接收到的飞机红外辐射功率计算公式,利用该公式计算出所建飞机三维模型每个面的辐射功率,并将其转换为红外灰度值,最后利用OpenGL技术直接对飞机三维模型进行操作,以实现各种位置、姿态下三维飞机模型到二维图像的转换,并用光学系统的点扩散函数与输出的图像进行卷积,最终得到反映光学模糊的飞机红外图像,最后开发了红外图像仿真软件,利用该软件生成了几种不同位置、不同姿态下的飞机红外图像,并对其进行了分析。     

Digital monitoring for heavy duty mechanical equipment based on fiber Bragg grating sensor

The digital monitoring principle and technologies for heavy duty mechanical equipment based on fiber Bragg grating (FBG) technology are introduced in this paper. The fundamentals of new-style FBG sensing technology, including the photorefractive effect of FBG, the physical formation, and the relation between optical properties and grating parameters, are investigated. The plaster, encapsulation and distribution planning of FBG sensor (FBGS), which is used to monitor heavy duty mechanical equipment under abominable environment and extreme conditions, are also studied. In addition, theoretical and experimental researches on the strain, temperature, displacement, and stress transmission characteristics between FBGS and detection interface are presented. The principle and method for temperature compensation in non-uniformity temperature field are described in detail as well. Comparing with the traditional sensing monitoring techniques, the application of FBGS technology on digital monitoring and diagnosis for heavy duty mechanical equipment has a number of significant technical advantages and will make a new breakthrough in this field.     

Renewal strategies for old industrial areas in the post-industrial age—Take “Zurich-West” in Switzerland as an example

This paper introduces and analyses the renewal planning of “Zurich-West”, an old industrial area. It points out that systematic and comprehensive target orientation, extensive collaboration in argumentation and decision-making, and the design ideas of coexistence and integration are the key to its success. Considering the status quo of China’s old industrial district remodeling, the paper offers some suggestions. Supported by the National Natural Science Foundation of China (Grant No. 50878045)     

p-moment stability of stochastic impulsive differential equations and its application in impulsive control

The exponential p-moment stability of stochastic impulsive differential equations is addressed. A new theorem to ensure the p-moment stability is established for the trivial solution of the stochastic impulsive differential system. As an application of the theorem proposed, the problem of controlling chaos of Lorenz system which is excited by parameter white-noise excitation is considered using impulsive control method. Finally, numerical simulation results are given to verify the feasibility of our approach. Supported by the National Natural Science Foundation of China (Grant No. 10772046)     

Effect of coagulation temperature on structures and properties of poly(<Emphasis Type="Italic">p</Emphasis>-phenylene benzobisoxazole) (DHPBO) fibers during dry-jet wet-spinning process

The effect of coagulation temperature on the morphology, microstructures and mechanical properties of dihydroxy poly(p-phenylene benzobisoxazole) (DHPBO) fibers was investigated during dry-jet wet-spinning process, in which the coagulation bath concentration and drawn ratio were kept as 10 wt% of PPA in water and 1.7, respectively. The structures and mechanical properties of the as-spun DHPBO fibers were characterized by FTIR, XRD, SEM, and single fiber tensile testing. The results indicated that in PPA/H₂O coagulation system, when the coagulation temperature was 25°C, highly crystallized DHPBO as-spun fibers possessing fine crystallites, circular and smooth morphology, and excellent mechanical properties could be achieved. Supported by the National Natural Science Foundation of China (Grant No. 50673017), Shanghai Leading Academic Discipline Project (Grant No. B603) and the Program of Introducing Taleuts of Discipline to University of People’s Republic of China (“111” Program) (Grant No. 111-2-04)     

Method of change management based on dynamic machining error propagation

In multistage machining processes(MMPs),the final quality of a part is influenced by a series of machining processes,which are complex correlations.So it is necessary to research the rule of machin-ing error propagation to ensure the machining quality.For this issue,a change management method of quality control nodes(i.e.,QC-nodes) for machining error propagation is proposed.A new framework of QC-nodes is proposed including association analysis of quality attributes,quality closed-loop control,error tracing...     

Introduction of fluorin into PBO polymer chains: Toward higher thermal stability and lower dielectric constant

A series of novel fluorinated benzoxazole polymers (6FPBO's) with high thermal stability and low dielectric constant were synthesized by copolymerization of 1,3-diamino-4, 6-dihydroxybenzene dihy-drochloride (DAR), 1,4-benzenedicarboxylic acid (PTA) and various amount of 4'4- (hexafluoroisopro-pylidene) bis (benzoic acid) (BIS-B-AF) in the medium of polyphosphoric acid (PPA). 6FPBO fibers were then obtained via dry-jet wet-spinning technique and characterized by means of Fourier transform infrared (FTIR) spectra, thermogravimetric analysis (TGA), single fiber tensile testing machine and scanning electron microscopy (SEM). FTIR spectrum of 6FPBO fibers indicated that the fluorine groups had been incorporated into PBO molecular chains successfully. TGA curves revealed that 6FPBO fibers possessed high thermal stability just as pure PBO fibers. Moreover, dielectric constant spectrum of 6FPBO exhibited that the polymers had low dielectric constant, especially in the range of high- frequency.     

Asynchronous rotation scan for synthetic aperture interferometric radiometer

Synthetic aperture interferometric technique has wide applications in optics, radio astronomy and microwave remote sensing areas. With the increasing demands of high resolution imaging observation, a new time-sharing sampling scheme of asynchronous rotation scan is proposed to meet the technical challenge of achieving a large equivalent aperture and overcome the operating barriers of space borne application. This configuration is basically composed by two asynchronously and concentrically rotating antenna groups, whose revolving radii and speeds are different. The synthetic aperture system with asynchronous rotation scanning scheme can effectively solve the trade-off problem of system complexity, and greatly simplify the system hardware at the cost of sacrificing a certain time resolution. The basic rules and design methods of asynchronous rotation scan are investigated The Gridding method is introduced to inverse the spiral sampling data for image reconstruction. The potential applications of geostationary orbit (GEO) earth observation and solar polar orbit (SPO) plasma cloud observation are explored with numerical simulations to validate the significance and feasibility of this new imaging configuration. Supported by the National Natural Science Foundation of China (Grant No. 40574070, 40671121, 40701100 and 40801136) and the National High-Tech Research Program of China (“863” Program) (Grant No. 2006AA12Z141)     

Variability of complementary relationship and its mechanism on different time scales

In the complementary relationship (CR) between actual and potential evapotranspiration, wet envi- ronment evapotranspiration (Ew) is usually calculated using the Priestley-Taylor (P-T) equation. Based on the data obtained from 38 catchments of the Haihe River basin and the Weishan experiment site in Shandong Province of China, this study has found variations in the Priestley-Taylor parameter α (e.g. increase in values with increase in the amount of precipitation on annual scale, seasonal fluctuation noted t...     

Discrimination for ablative control mechanism in solid-propellant rocket nozzle

The ablation in solid-propellant rocket nozzle is a coupling process resulted by chemistry, heat and mass transfer. Based on the heat and mass transfer theory, the aero-thermo-dynamic, and thermo-chemical kinetics, the thermal-chemical ablation model is established. Simulations are completed on the heat flow field and chemical ablation in the nozzle with different concentrations, frequency factors and activation energy of H2. The calculation results show that the concentration and the activation energy of H...