活性炭纤维布担载纳米TiO2的三种方法

TiO2光催化剂与多孔炭材料的复合，可以将吸附性能与光催化降解性能有机地结合在一起。以活性炭纤维布(ACFC)为载体，采用TiO2粉体分散液直接浸涂法、中频交流磁控溅射法及溶胶-凝胶法进行了担载实验，用SEM对三种担载方法得到的样品进行形貌观察，结果表明溶胶-凝胶法比较适合于ACFC上担载TiO2。而且，通过控制提拉速度、浸涂次数、热处理条件，可以得到形貌完整、结合强度较好的复合体，该复合体的XRD衍射结果表明，ACFC表面担载的TiO2为锐钛矿，在紫外-可见光漫反射光谱中，于350—400nm区间有明显的吸收边，表明此复合体具有光催化活性。     

Formation of Titanium Carbide/Aluminum Oxide Nanocomposite Powder by High-Energy Ball Milling and Subsequent Heat Treatment

The preparation of titanium carbide/aluminum oxide (TiC/Al₂O₃) nanocomposite powders from a mixture of titanium, carbon, and Al₂O₃ powders via a high-energy ball milling process and subsequent heat treatment was investigated. The microstructure development of the powder mixtures was monitored by X-ray diffraction and transmission electron microscopy. The ball milling of an elemental carbon, titanium, and Al₂O₃ powder mixture at ambient temperature resulted in the formation of TiC within 15 h of milling. With further milling of up to 25 h, the resulting powder mixture was composed of nanosized TiC particles and nanocrystalline carbon, titanium, and Al₂O₃. The nanocrystalline titanium and carbon were transformed into nanosized TiC particles after subsequent heat treatment. The final product was composed of nanosized TiC and microcrystalline Al₂O_3. Most of the nanosized TiC particles were located within Al₂O₃ grains.     

基于容器的Web运行环境轻量级虚拟化方法

Web运行环境、Web服务及Web应用的虚拟化是减轻Web操作系统安全风险的一种有效方法,然而Web运行环境的虚拟化仍然存在不少挑战,如：执行时间、资源负载和兼容性等。为解决Web操作系统在安全性、执行时间、资源负载和兼容性方面的问题,提出了一种Web运行环境轻量级虚拟化方法,采用Docker容器技术实现进程级别的隔离。本虚拟化方法可在一个基本内核上支持运行多种Web运行环境的容器。此外,为了减轻容器创建负载,提出了容器启动机制;为减轻系统资源负载,进行了系统的轻量化处理。在嵌入式设备的实验结果表明,该虚拟化方法在执行时间、资源负载及兼容性方面都具有较优表现。     

聚醚多元醇中间品钾（钠）离子的快速测定方法

本法采用乙醇水溶解试样，以经过处理的无钾，钠离子聚醚鸩元醇作为基体，配制标准样品，用火焰光度法检测聚醚多元醇中间品的钾（钠）离子的含量。由于样品处理简单，应用浓度直读取数据，可快速准确地测定试样，适用于聚醚多元醇生产过程中间品的检验。     

铝电解电容器用新型宽温高压工作电解液

采用异癸二酸铵为主溶质,乙二醇和γ-丁内酯为复合溶剂,制备新型宽温(-40~105℃)、高压(400 V)铝电解电容器工作电解液,并检测了该电解液和用该电解液生产的电解电容器的性能。测试结果表明,该工作电解液25℃时电导率达到1.6 mS/cm,闪火电压为480 V,-40℃下未见晶体析出;CD 110/400 V铝电解电容器试样的漏电流≤10μA,损耗0.03,容量变化率只有-3%。经过105℃高温贮存250 h后各项电气性能不仅优于国家标准,而且能达到严格的企业标准。     

电解氧化法制取葡萄糖酸钠

研究了在无隔膜槽中电解氧化葡萄糖制取葡萄糖酸钠的方法，得出了最佳工艺条件，为电解法制取葡萄糖酸钠的工业化提供了依据。     

国产MB-86催化剂使用情况分析

抚顺引进的５００００ｔ／ｙ丙烯腈装置要改造到７００００ｔ／ｙ的生产能力，其中更换国产催化剂ＭＢ－８６是较为关键的一步，文章对此进行了总结与分析。     

固体硫在超临界/近临界酸性流体中的溶解度(Ⅰ)实验研究

建立了1套静态法测定难挥发物质(固体或液体)在超临界/近临界流体中溶解度的实验装置,并测定了固体硫在近临界硫化氢、超临界CO_2、CH_4及富硫化氢酸性气体混合物中的溶解度数据,取得了较好的结果.     

Improvement of Microwave Loss Tangent and Tunability of Ba0.55Sr0.45TiO3/MgO Composites Using the Heterogeneous Precipitation Method

Ba_0.55Sr_0.45TiO₃/MgO composites were successfully prepared by the heterogeneous precipitation method and their structural, surface morphological, tunable properties, and dielectric properties at microwave frequency were systemically investigated. Compared with the sample prepared by the traditional solid-state method, the sample prepared by the heterogeneous precipitation method exhibits a smaller grain size, more uniform microstructure, higher tunability, and lower microwave loss, and these properties are very beneficial to the development of the microwave tunable devices application. Moreover, the effects of La₂O₃ doping on the dielectric and tunable properties of BST/MgO composites are investigated. The result shows that the La³⁺-doped sample has higher tunability and lower microwave loss than the undoped one.     

The deposition of coke from methane on a Ni/MgAl2O4 catalyst

Temperature-programmed reaction techniques and Raman spectroscopy were used to characterize coke species deposited on a 5% Ni/MgAl₂O₄ catalyst for dry reforming of methane. The CH₄ temperature-programmed decomposition profiles showed that the ignited decomposition temperatures of CH₄ increased from 273 to 378 °C when MgAl₂O₄ replaced the catalyst support γ-Al₂O₃. The temperature-programmed oxidation, temperature-programmed hydrogenation and temperature-programmed CO₂ reaction profiles showed that there were three carbon species (i.e. C_α, C_β and C_γ) on the catalyst surface. Raman spectroscopy showed that C_γ was graphite-like carbon species, which was responsible for catalyst deactivation. The C_γ species was the most inactive species toward H₂ and O₂, while it was unexpectedly more active toward CO₂. The unique reactivity of CO₂ with different coke specie could be ascribed to the carbonate, bidentate and formate species formation on MgAl₂O₄ surface. These surface species enhanced the oxidation of C_γ species and thus contributed to the high stability of Ni/MgAl₂O₄ catalyst.