Numerical Filling Simulation of Injection Molding Using Three-Dimensional Model

1 Introduction During injection moulding, the rheological response of polymer melts is generally non-Newtonian and nonisothermal with the position of the moving flow front. Because of these inherent factors, it is difficult to analyze the filling process. Therefore, simplifications usually are used. For example, in middle-plane technique and dual domain technique [1], because the most injection molded parts have the characteristic of being thin but generally of complex shape, the Hele-Shaw …     

腐蚀算法在重建一类特殊管道中的应用

针对一类特殊而不能直接对其观察的管道（如动物的血管），为了准确了解其内部特征和形态，借助计算机给出了一种用腐蚀算法来重建管道原形的方法。这种方法简单易行，而且精确度高。     

空调器用风冷冷凝器换热能力实验研究

实验测定了几种不同铜管、肋片组合的冷凝器在不同的风量和风机转速下的换热量，发现采用内螺纹铜管和迎风侧平片、背风侧冲缝片的冷凝器具有最优的换热性能。分析了多流路冷凝器中不同流路之间的制冷剂分配不均匀性和再热现象。     

ZnSe棱镜折叠波导CO_2激光器的研究

研制了使用ZnSe棱镜折叠的波导CO_2激光器,提出一种CO_2激光—He-Ne激光调整光路的方法,并获得了该种折叠激光器的振荡。进一步的改进可以提高其输出功率而得到实用性的器件。     

基于S5933的PCI总线与8051的接口设计

简要介绍了PCI总线的特点，重点介绍了AMCC公司推出的S593X系列的高性能接口控制器，并通过实践给出基于S5933的PCI总线和8051的接口设计技术。     

Preparation of Ultra—fine Aluminum Nitride in Thermal Plasma

Ultra-fine aluminum nitride has been synthesized by the evaporation of aluminum powder at atmospheric-pressure nitrogen plasma in a hot-wall reactor.The average size of aluminum nitride particle is 0.11μm measured by scanning electric mirror(SEM),and the purity is at least over90% evaluated by X-Ray diffraction(XRD).The conversion of Al powder to aluminum nitride is strongly depended on the injection of NH3.Typical experimental parameters such as the feed rate of raw material,the flow rate of ammonia and the position of injecting aluminum powder into the reactor are given.     

中国电信"新视通"随时随地面对面

沟通与交流,是人类需求的永恒主题。需求推动着技术的发展,技术又引导着人类社会不断进化和趋向文明。从语言的产生、电话的问世,直到互联网的推广,均基于此。当单纯的声音、文字或图像传输不能满足愈来愈多样化、复杂化的通信需求的时候,一种集三者为一体的全新通信方式就愈来愈被关注和认同,中国电信应时而动,于2002年推出了“新视通”视像通信业务。“新视通“业务是建立在中国电信视讯平台上的,以视觉为主、方便接入、易于获得、公众化、多媒体的视像通信新业务。它通过异地间语音、图像和数据等信息的实时交互传递,召开远程视讯会议。…     

管理系统设计中的人体工程设计思想

目前人体工程学的应用领域主要集中于机器或生产环境等“硬”系统的研究与设计，其设计的思想、内容与程序对具有“软”系统特征的管理系统设计具有深远影响。文章对管理系统设计中的人体工程设计思想进行了讨论。     

SIMILARITY LAW OF FLUCTUATING PRESSURE WITHIN HYDRAULIC JUMP AREA

Through a series of model tests of five scales for 2-D free hydraulic jump, the da-ta of fluctuating pressure acting on the floor level within the hydraulic jump were obtained. Dur-ing the experiments, Froude number varied from 2.94 to 8.61, and Reynolds number rangedfrom 2×10~4 to 6×10~5. Experiment results indicate that the amplitude scale of fluctuating pres-sure is the length scale of model, i. e. P'=L, which agrees with gravity similarity law: Thefrequency scale of the fluctuating pressure is a unity i. e., f=1, which does not satisfy thegravity similarity law.     

TURBULENCE MEASUREMENT INSTRUMENT WITH A SILICON PIEZORE-SISTANCE BEAM

A newly developed turbulence measurement instrument is introduced in the paper.The transducer of the device is based on the principle of the effect of silicon piezoresistance that isintegrated in a Wheatstone bridge on a pure silicon beam. At one end of the beam, a small lightball is installed as the target forced by the water flow. The other parts are prevented from thewater flow with a sophisticated stainless steel tube. The instrument can be used to measure turbu-lent velocities either in clear Water or in flows bearing hyperconcentration of sediment. It can al-so be used to measure velocities in both glass flume and model experiments as well as in pipe ex-periment by being mounted in a special way.