Fatty acid esters with short‐chain alcohols in two‐phase olive pomace oils

Two‐phase decanter olive pomace (TPOP) is the by‐product of a centrifugation system, used to produce olive oil, that separates olive oil and moist pomace. The water content in these olive pomaces is about 70%, while it was 45‐50% in the olive pomace stemming from three‐phase systems (oil, water, and pomace) and 30% in the old press system. The aim of this work is focused on quantification and changes undergone during olive pomace storage in ponds of esters of fatty acids with short‐chain linear alcohols, which can be considered as a refining loss. The results indicate that oil deterioration increases very rapidly, in particular when oil is extracted from the TPOP surface. Special attention should be paid to the storage of TPOP, establishing a maximum of 2 months in all cases.     

Evaluation of the antimicrobial action of honey against Staphylococcus aureus, Staphylococcus epidermidis, Pseudomonas aeruginosa, Escherichia coli, Salmonella enteritidis, Listeria monocytogenes and Aspergillus niger. Evaluation of its microbiological charge

The evaluation of the microbiological charge present in Costa Rican samples as the evaluation of its antimicrobial activity over different microorganisms, including those associated to wound infections, will allow to emit criteria referred to its use in therapeutic treatments, specially as alternative therapy for cases involving antibiotic resistant bacteria. The microbiological charge of 25 honey samples, acquired in Costa Rican markets was evaluated through several indicators including total plate aerobic count, total plate anaerobic count, total aerobic spore count, total anaerobic spore count and molds and yeast count. Also, samples were inoculated in tubes with chopped meat media and plated in egg yolk agar in order to determine the presence of Clostridium botulinum. For the antimicrobial activity evaluation, the diffusion method in Muller Hinton agar was performed, testing different honey concentrations (100, 75, 50, 25, 12,5 and 6,25 % v/v) against Staphylococcus aureus (ATCC 25923), Staphylococcus epidermidis (UCR 2902), Pseudomonas aeruginosa (ATCC 9027), Escherichia coli (ATCC25922), Salmonella enteritidis (ATCC 13076), Listeria monocytogenes (ATCC 19116) and Aspergillus niger. The results obtained for the microbiological characterization of honey show that 91% of samples had counts equal or lower than 1,0 x 10(1) CFU/g. No positive result was obtained for the isolation of C. botulinum. 24 of the samples analyzed inhibited the growth of S. aureus even in a 25% v/v concentration, nevertheless, A. niger was no inhibited by any of the samples tested.     

A dual-affinity gene fusion system to express small recombinant proteins in a soluble form: expression and characterization of protein A deletion mutants

A novel gene fusion system to express and purify small recombinantproteins in Escherichia coli has been constructed. The conceptallows for affinity purification of soluble gene products bysequential albumin- and Zn²+-affinity chromatography. The dual-affinitysystem is well suited for expression of unstable proteins asonly full-length protein is obtained after purification andproteins gain proteolytic stability in the fusion protein. Herewe show that the dual-affinity approach can be used for theexpression of various unstable derivatives of a single IgG-bindingdomain based on staphylococcal protein A. Analysis of the proteolyticstabilities and the IgG-binding properties of the differentmutant proteins suggest that the model for the structure ofan IgG-binding domain must be re-evaluated.     

Unifying Functional User Interface Design Principles

ABSTRACT

Many designers and User Interface (UI) educators discuss principles to be followed when designing the functional aspects of a UI. However, many UI principles have been proposed, scattered in scientific papers and teaching books. Some principles are different, and many are somehow similar or overlapping with others. This makes it very difficult to comprehend where to pay attention to when designing a UI. In this paper, we perform a systematic literature review to first identify the most relevant authors in the domain of functional UI design principles. Focusing on the three most cited works of these authors, we extracted 257 principles. We next analyzed all these principles, unified their variants, and, considering their scientific influence, finally derived a shorter and core selection of 36 principles. This core selection provides educators and UI designers with a clear path to teach, evaluate, learn and improve the UI functional design.     

A scalable solution to the nearest neighbor search problem through local-search methods on neighbor graphs

Pattern Analysis and Applications - Nearest neighbor search is a powerful abstraction for data access; however, data indexing is troublesome even for approximate indexes. For intrinsically...     

Gripper Design for Radio Base Station Autonomous Maintenance System

For an autonomous system to perform maintenance tasks in a networking device or a radio base station (RBS), it has to deal with a series of technological challenges ranging from identifying hardware-related problems to manipulating connectors. This paper describes the development of a robot maintenance system dedicated to detect and resolve faulty links caused by unplugged or poorly connected cables. Although the maintenance system relies on four subsystems, we significantly focus on our low-cost and efficient custom gripper solution developed to handle RJ45 Ethernet connectors. To examine our gripper, we conducted three experiments. First, a qualitative questionnaire was submitted to 30 users in the case of the teleoperated scenario of the gripper attached to a robotic arm. Similarly, we also tested the automatic operation mode. The results showed that our system is reliable and delivers a highly efficient maintenance tool in both teleoperated and autonomous operation modes. The practical experiment containing the removal or unplugging of connectors demonstrated our gripper’s ability to adequately handle these, whereas the feedback from the questionnaire pointed to a positive user experience. The automatic test assessed the gripper’s robustness against the continuous operation.

     

High-voltage surge protection by a varistor-filled air gap

The electric discharge across a varistor granule filled air gap under a fast-rising voltage pulse was investigated for surge protection applications. The effects of temperature and pressure on the arc and the electrical conduction were analyzed by the characteristic changes in voltage waveforms triggered by a fast-rising high voltage pulse. In addition to the gap size, experimental results show that competing mechanisms among arc conduction, conduction through the varistor granule network, thermionic emission from Joule heating at granule-to-granule contact points, and the magnitude of the switching voltage dictate the maximum surge protection voltage for the filled air gap. Experimental evidence indicated that accumulated degradation was created at small contact points between varistor granules by repetitive assaults from longer duration, high voltage pulses. The uniqueness of using varistor over other dielectric granules in an air gap for surge protection is identified and discussed.     

Evaluation of the removal of n-butanol vapor by the poly(lactic acid)-zeolite-TiO2 composite and formation of by-products

The use of polymeric films incorporated with zeolite-TiO₂ composites associated with UV radiation can be an alternative in the removal of volatile organic compounds (VOCs) through the adsorption and photodegradation processes. This study produced poly(lactic acid) (PLA) films incorporated with 13× zeolite, TiO₂, and 13×-TiO₂ zeolite composite to remove n-butanol and evaluate the by-products generated in the process. The results showed that 13× zeolite and TiO₂ added individually or as a composite to PLA, gave the polymer matrix a significant increase in the removal capacity of n-butanol. The best performance was presented by the zeolite-TiO₂, composite, confirming a synergistic effect. However, the formation of CO and CO₂ exceeded the expected values, with the verification that the polymeric matrix underwent photodegradation action by TiO₂. The polymeric film only containing zeolite is the most suitable for the removal of VOCs, as it did not present degradation of the PLA, generating a lower concentration of by-products.     

Decision support system for classifying archaeological pottery profiles based on Mathematical Morphology

We present a decision support system to help archaeologists in classifying wheel-made pottery pieces by its profile. A novel shape characterization method, using Mathematical Morphology, is introduced for this purpose. Each profile is represented as a vector, obtained by sampling the so called morphological curves (erosion, dilation, opening and closing), and Euclidean Distance is used as a similarity measure. We show results of our method applied to a profile database of Iberian Pottery from the upper valley of Guadalquivir River (Spain).     

A review on the combination of binary classifiers in multiclass problems

Several real problems involve the classification of data into categories or classes. Given a data set containing data whose classes are known, Machine Learning algorithms can be employed for the induction of a classifier able to predict the class of new data from the same domain, performing the desired discrimination. Some learning techniques are originally conceived for the solution of problems with only two classes, also named binary classification problems. However, many problems require the discrimination of examples into more than two categories or classes. This paper presents a survey on the main strategies for the generalization of binary classifiers to problems with more than two classes, known as multiclass classification problems. The focus is on strategies that decompose the original multiclass problem into multiple binary subtasks, whose outputs are combined to obtain the final prediction.