关于消防标准化工作的思考

分析了当前我国消防标准化工作的现状及其存在的主要问题;并对消防标准化的发展提出对策和建议。     

Applications of Soliton Transmission Control in Optimal Design of Long－Haul Soliton Communication System

ＡｐｐｌｉｃａｔｉｏｎｓｏｆｃｈａｏｓｉｎｓｐｒｅａｄｓｐｅｃｔｒｕｍｃｏｍｍｕｎｉｃａｔｉｏｎｓＡｐｐｌｉｃａｔｉｏｎｓｏｆＳｏｌｉｔｏｎＴｒａｎｓｍｉｓｓｉｏｎＣｏｎｔｒｏｌｉｎＯｐｔｉｍａｌＤｅｓｉｇｎｏｆＬｏｎｇ－ＨａｕｌＳｏｌｉｔｏｎＣｏｍ...     

P偏振光双表面反射比的角谱及其应用

p-偏振光在镀膜平板基片两面的反射光强度比值的角谱是膜层参数(折射率、消光系数和厚度)的函数.实验表明通过角谱的测量和数值模拟是精确测量薄膜参数的新途径.基于此原理,还试制出掺Sb的SnO2溶胶凝胶薄膜的光化学气敏传感器.     

浅谈液化石油气火灾的特点及消防措施

以某煤气公司液化石油气火灾事故为例,详细分析了液化石油气火灾的特点。并针对防火、安全管理、应急预案、扑救措施等问题提出了可借鉴的措施。     

Fivefold symmetry in real and reciprocal spaces

Tetrahedrally close-packed structures with juxtaposed pentagonal antiprisms, such as the μ, C14 Laves and the newly found C phases, were studied by means of HREM and SAD. It was found that each bright spot in the structural image corresponds to an antiprism. Differently oriented domains of these phases intergrow frequently with a fairly good match at the interphase boundary. All diffraction patterns of these phases show a fivefold distribution of spot-pairs, and it is shown that this fivefold symmetry comes from the pentagons and spot-pairs from two pentagonal prisms superposed in antisymmetrical positions.     

鄱阳湖湖底沉积物放射性水平

本文报道了1985年鄱阳湖湖底沉积物放射性水平的调查结果。沉积物中 U、Th、~(226)Ra、~(40)(?)和~(137)Cs 的比活度分别为64.8、67.9,58.9、676.1和3.5Bq/kg;用~(137)Cs 测龄方法作了沉积物泥芯垂直深度的年代定位,由此得知1985—1958年对应深度沉积物中 U、Th、~(226)Ra 和~(40)K 的比活度与1957—1930年对应深度沉积物比较无显著性差异;U、Th 和~(226)Ra 的浓集因予分别为5.2×10~413.9×10~4和4.8×10~4L/kg。     

Feature Reduction via Generalized Uncorrelated Linear Discriminant Analysis

High-dimensional data appear in many applications of data mining, machine learning, and bioinformatics. Feature reduction is commonly applied as a preprocessing step to overcome the curse of dimensionality. Uncorrelated Linear Discriminant Analysis (ULDA) was recently proposed for feature reduction. The extracted features via ULDA were shown to be statistically uncorrelated, which is desirable for many applications. In this paper, an algorithm called ULDA/QR is proposed to simplify the previous implementation of ULDA. Then, the ULDA/GSVD algorithm is proposed, based on a novel optimization criterion, to address the singularity problem which occurs in undersampled problems, where the data dimension is larger than the sample size. The criterion used is the regularized version of the one in ULDA/QR. Surprisingly, our theoretical result shows that the solution to ULDA/GSVD is independent of the value of the regularization parameter. Experimental results on various types of data sets are reported to show the effectiveness of the proposed algorithm and to compare it with other commonly used feature reduction algorithms.     

基于波动方程的聚焦点控制照明叠前深度偏移

 基于波动方程的聚焦点控制照明叠前深度偏移技术借助于差分计算，把速度、密度等介质参数的影响体现在差分计算的矩阵方程中，能够自动适应速度场的任意变化，快速傅里叶变换的使用也加速了波场延拓的计算速度。因此此法兼具有限差分偏移方法和傅里叶偏移方法的优点，既可适应速度场的剧烈变化，又可保证对陡倾地层的成像效果，是目前针对复杂构造最有效的成像方法之一。对于单个聚焦点及其周围的成像步骤为：①采用矩形网格情况下绕射走时的有限差分计算方法生成合成算子；②应用合成算子来合成面炮震源和面波记录；③对合成的面炮震源和面波记录做傅里叶有限差分法波动方程叠前深度偏移，得到该聚焦点及其附近区域的成像结果。按照上述成像步骤，将震源波场和炮集记录依据相应的外推公式进行延拓，最终应用成像条件求取成像值。在地质目标处选取多个聚焦点，可以得到面向目标的控制照明偏移成像，在多个层位上选取多个聚焦点进行控制照明叠前深度偏移，可以得到整块区域的成像。通过对Marmousi模型的试算，取得了较好的效果。     

抽余C_4烃中异丁烯催化逆流水合制叔丁醇

采用大颗粒离子交换树脂催化剂,在φ100mm×10m的反应器中进行了异丁烯催化逆流水合制叔丁醇的中间试验。考察了反应温度、水油体积比和抽余C4烃的流速等对异丁烯转化率的影响。试验结果表明,异丁烯催化逆流水合制叔丁醇的适宜操作条件为:反应温度80~90℃,水油体积比为4~5,抽余C4烃的流速为0.45~0.55mm/s。在此条件下,异丁烯的转化率可达88.8%。工业装置运转结果表明,异丁烯转化率大于75%。     

Microstructure investigations of ball milled materials

HREM and FEG TEM were emphasized and extensively used to follow the most subtle changes in the structure and composition of ball-milled Cu, Fe-Cu, and thermally decomposed Fe60Cu40. Some significant results are obtained and summarized as follows: HREM shows that the deformation of ball-milled copper proceeds mainly by twinning and shear bands (SBs) formation. The nano-grains formed during ball milling (BM) contain a high density of dislocations. The grain boundaries (GBs) of nanocrystalline (NC) Cu prepared by BM are ordered, curved, and strained, but disordering, lattice distortion, and nanovoids in local regions were frequently observed. Nanoscale composition analysis on mechanically alloyed Fe16Cu84 shows that the average Fe content in both the interior of grains and the GBs is close to the designed composition, which proves that a supersaturated solid solution has really formed. However, the Fe content is rather inhomogeneous between the larger and smaller grains, which infers the inhomogeneous mixing of Fe and Cu during mechanical alloying (MA). NC structure and the mechanical force-enhanced fast diffusion are the reasons of the formation of supersaturated solid solutions in immiscible systems with positive enthalpy of mixing. HREM observations carried out with the thermally decomposed Fe60Cu40 solid solution show that the Nishiyama (N-W) or Kurdyumov-Sachs (K-S) orientation relationships exist between alpha-Fe and Cu. Energy dispersive X-ray spectra (EDXS) results show that the Cu content in these alpha-Fe grains reaches as high as 9.5 at.% even after heating to 1,400 degrees C, which is even higher than the maximum solubility of Cu in gamma-Fe at 1,094 degrees C.