Influence of Hydroxypropyl Methylcellulose and of Manufacturing Technique on in Vitro Performance of Selected Antacids

Factors affecting the performance of antacids F-MA 11, dihydroxy aluminum aminoacetate, magaldrate and magnesium hydroxide were studied in vitro using Schaub's acid neutralization test, a modified Reheis reaction velocity test and the USP test. From the results obtained it was evident that type and combination of antacid, the adjuvants and formulation techniques used in preparation of antacids affect their performance. The USP preliminary antacid test and acid neutralization test are not optimal in vitro tests to evaluate in vitro onset and duration of action of antacids.     

A genetic‐based neuro‐fuzzy controller for blind equalization of time‐varying channels

This paper presents a neuro‐fuzzy network (NFN) where all its parameters can be tuned simultaneously using genetic algorithms (GAs). The approach combines the merits of fuzzy logic theory, neural networks and GAs. The proposed NFN does not require a priori knowledge about the system and eliminates the need for complicated design steps such as manual tuning of input–output membership functions, and selection of fuzzy rule base. Although, only conventional GAs have been used, convergence results are very encouraging. A well‐known numerical example derived from literature is used to evaluate and compare the performance of the network with other equalizing approaches. Simulation results show that the proposed neuro‐fuzzy controller, all parameters of which have been tuned simultaneously using GAs, offers advantages over existing equalizers and has improved performance. From the perspective of application and implementation, this paper is very interesting as it provides a new method for performing blind equalization. The main contribution of this paper is the use of learning algorithms to train a feed‐forward neural network for M‐ary QAM and PSK signals. This paper also provides a platform for researchers of the area for further development. Copyright © 2008 John Wiley & Sons, Ltd.     

Electro-osmotic transport in charged cylindrical micro- and nano-channels

Present paper deals with the electro-osmotic flow in a infinitely extended cylindrical micro- and nano-channel. The channel height is considered to be much less than the channel length. We consider a mixture of water or another neutral solvent and a salt compound such as sodium chloride for which the ionic species are entirely dissociated. We have developed a two-dimensional numerical model to analyze the flow characteristics and concentration distributions of a electro-osmotic flow without using the Debye-Hückel approximation. The governing system of equations consist of the mole fractions of ions, the potential and the fluid flow equations. Results are produced for the case, where the channel height is much greater than the width of the electric double layer (EDL) (micro-channel) and for the case where the channel height is of the order of the width of the EDL (nano-channel). For various values of mole fraction, we studied the electro-osmotic flow profiles and the potential distribution along the channel at different channel heights. In this case of steady flow the velocity field and the potential are identical. The electro-osmotic flow produces a uniform ‘plug profile’ at channel heights greater than 20 nm, which results in reduced sample species dispersion as compared to the velocity gradients associated with the pressure driven flows. Asymptotic solutions are obtained when the flow in a micro-channel is considered.     

Healing substrates with mobile, particle-filled microcapsules: designing a 'repair and go' system.

We model the rolling motion of a fluid-driven, particle-filled microcapsule along a heterogeneous, adhesive substrate to determine how the release of the encapsulated nanoparticles can be harnessed to repair damage on the underlying surface. We integrate the lattice Boltzmann model for hydrodynamics and the lattice spring model for the micromechanics of elastic solids to capture the interactions between the elastic shell of the microcapsule and the surrounding fluids. A Brownian dynamics model is used to simulate the release of nanoparticles from the capsule and their diffusion into the surrounding solution. We focus on a substrate that contains a damaged region (e.g. a crack or eroded surface coating), which prevents the otherwise mobile capsule from rolling along the surface. We isolate conditions where nanoparticles released from the arrested capsule can repair the damage and thereby enable the capsules to again move along the substrate. Through these studies, we establish guidelines for designing particle-filled microcapsules that perform a 'repair and go' function and thus, can be utilized to repair damage in microchannels and microfluidic devices.     

Nano-octopus: a new form of branching carbon nanofiber

A new multibranched octopus-type structure of carbon nanofibers is synthesized from a natural precursor, camphor, by a thermal chemical vapor deposition technique. An alloy of Cu:Ni catalyst is prepared by electrochemically coating nickel on a copper sheet, with nickel sulfate as an electrolyte, and heating that nickel-coated copper sheet to a higher temperature. Deposition of carbon on these substrates leads to the formation of a branched nanostructure in the temperature range of 923 K to 1023 K. The fiber diameter increases from 30 nm to 250 nm with increasing pyrolysis temperature. Detailed morphology and the internal structure of these fibers are studied by scanning and transmission electron microscopy.     

The sliding-window packet switch: a new class of packet switch architecture with plural memory modules and decentralized control

Shared-memory based packet switches are known to provide the best possible throughput performance for bursty data traffic in high-speed packet networks and internets compared with other buffering strategies under conditions of identical memory resources deployed in the switch. However, scaling of shared-memory packet switches to a larger size has been restricted mainly due to the physical limitations imposed by the memory-access speed and the centralized control for switching functions in shared-memory switches. A new scalable architecture for a shared-memory packet switch, called the sliding-window (SW) switch, is proposed to overcome these limitations. The SW switch introduces a new class of switching architecture, where physically separate multiple memory modules are logically shared among all the ports of the switch, and the control is decentralized. The SW switch alleviates the bottleneck caused by the centralized control of switching functions in large shared-memory switches. Decentralized switching functions enable the SW switch to operate in a pipeline fashion to enhance scalability and switching capacity compared with that of previously known classes of shared-memory switch architecture.     

Synthesis and properties of star-like wholly aromatic polyester fibers

Novel star-like wholly aromatic copolyesters having four arms based on a tetraamine star core, p- and m- hydroxybenzoic acids and 6-hydroxy-2-naphthoic acid have been successfully synthesized and spun into fibers for the investigation of the effect of the star-like structure on improving compressive properties of the fiber. The reactivity of the star core was demonstrated using a model compound with FTIR, ¹H and ¹³C NMR spectroscopy. The ¹³C NMR spectrum of the star-like terpolymer having a molar ratio of 10:1 of the monomers to star core showed a characteristic peak at around δ62 ppm which corresponds to a tetra-substituted carbon and thereby demonstrates that the star core was really incorporated into the polymer. The star-like copolyester exhibited a clear stir opalescence and liquid crystalline morphology in the temperature range of 150-280 °C. However, no transition was observed in the DSC thermogram except a clear T_g at 110 °C. The star-like terpolymer fiber, prepared from a polymer with a molar ratio of 500:1 for the monomers to imide core, was spun in the liquid crystalline state at 180 °C. Fiber structure and properties have been studied.     

Theoretical investigation of penetration characteristics in gas metal-arc welding using finite element method

In the modeling of the gas metal-arc (GMA) welding process, heat inputs to the workpiece by the arc and the metal transfers have been considered separately. The heat energy delivered due to the metal transfer has been approximated in the form of a cylindrical volumetric heat source, whose dimensions of the radius and the height are dependent on the molten metal droplet characteristics. The pinch instability theory (PIT) and the static force balance theory (SFBT) of drop detachment have independently been used to obtain the expressions for various characteristics of the drop,i.e., the drop radius, the drop velocity, and the drop frequency at various welding parameters. The occurrence or the nonoccurrence of finger penetration, routinely found in the GMA welding at high welding currents, has been satisfactorily explained by the cylindrical heat source model. The effect of various welding parameters,e.g., the welding current, the wire radiusetc., on the weld bead penetration characteristics has been investigated. In this modeling effort, the heat conduction equation has been solved in three dimensions.     

Off-line quality control for V-process castings

In the present work Taguchi's approach has been applied to the V-process castings of Al-11 per cent Si alloy to acertain the most influential control factors which will provide better and consistent surface finish to the castings regardless of the noise factors present. The control factors of the V-process that may affect the quality of the castings are the molding sand, vibration frequency, vibrating time, degree of vacuum imposed, and pouring temperature. In order to understand how these factors affect the surface roughness of the V-process castings, response surface methodology has been applied, and to obtain the optimal setting of the control factors Taguchi's method has been used. It is found that the pouring temperature has a significant effect on the surface roughness of Al-11 per cent Si alloy castings made by a V-process. Thus the pouring temperature must be kept at the lower level. All other factors are insignificant. Therefore, any setting of the insignificant factors/variables that give the minimum cost can be used.