Dielectric and piezoelectric properties of 1–3 non-lead barium zirconate titanate-Portland cement composites

Non-lead barium zirconate titanate (BZT)-Portland cement (PC) composites have been seen as promising new non-lead composites. This paper reports research work on the dielectric and piezoelectric properties of 1–3 non-lead barium zirconate titanate (BZT)-Portland cement (PC) composites. The 1–3 non-lead composites with different BZT contents at 40–70% by volume were fabricated by the dice-and-fill method. The results show that the dielectric loss of the 1–3 non-lead composite was lowest at 0.08 at 70% BZT composites. The models are applied for the calculation with the dielectric constant, piezoelectric coefficient and piezoelectric voltage constant and the results were found to fit closest to that of the parallel model. At 70% BZT content or higher, piezoelectric coefficient was found to have values higher than 130 pC/N. In addition, the new 1–3 non-lead composites can be tuned to an ideal compatible value that match the requirement of concrete structure.     

Towards a quantitative understanding of the within-host dynamics of influenza A infections

Although the influenza A virus has been extensively studied, a quantitative understanding of the infection dynamics is still lacking. To make progress in this direction, we designed several mathematical models and compared them with data from influenza A infections of mice. We find that the immune response (IR) plays an important part in the infection dynamics. Both an innate and an adaptive IR are required to provide adequate explanation of the data. In contrast, regrowth of epithelial cells did not seem to be an important mechanism on the time scale of the infection. We also find that different model variants for both innate and adaptive responses fit the data well, indicating the need for additional data to allow further model discrimination.     

Properties of CNTs-modified lead-free BCTS ceramic–Portland fly ash cement composites

Fly ash (FA) is widely used as a supplementary cementitious material in the production of Portland cement concrete. The effect of addition of carbon nanotubes (CNTs) and FA on the properties of barium calcium stannate titanate (BCTS) ceramic–Portland FA cement composites was investigated. These composites have potential for use as sensors and transducers in the monitoring of structural health in concrete structures containing FA. CNTs were found to have filled the pores of the composites. All composites showed good compatibility with the concrete mix. The dielectric constant and electrical conductivity of composites were in the range 200–257 and 1.04 × 10^–6 to 1.66 × 10⁻⁶ S/m, respectively. The presence of FA in composites increased the piezoelectric voltage coefficient (g₃₃). Adding CNTs increased the piezoelectric charge coefficient (d₃₃), thickness electromechanical coupling coefficient (K_t), and also g₃₃ but decreased mechanical quality factor (Q_m), which is related to good for the receiving sensor and transducer application. CNTs can improve the properties of these composites and composite with FA content at 10 vol.%, and CNTs at 1 vol.% exhibited the highest compressive strength and piezoelectric values (d₃₃ = 44 pC/N, g₃₃ = 20.21×10^–3 V m/N, and K_t = 18.9%), along with higher g₃₃ values, than pure BCTS ceramic.     

Influence of heat treatment temperature on the properties of the lithium disilicate-fluorcanasite glass-ceramics

This study aims to investigate the influence of heat treatment temperatures on the mechanical properties and chemical solubility (CS) of lithium disilicate-fluorcanasite glass-ceramics and to develop new dental materials. The glasses and glass-ceramics were prepared using CaF₂-SiO₂-CaO-K₂O-Na₂O-Li₂O-Al₂O₃-P₂O₅-based glass system using a conventional melt quenching method followed by a two-stage crystallization process. This two-stage method involves two heating temperature steps: first at a constant temperature (T_S1) of 600°C and second step at varying temperatures (T_S2) of 650, 700, 750, and 800°C. The crystallization behavior, phase formation, microstructure, translucency characteristic, density, hardness, fracture strength, and CS were investigated. It was found that the lithium disilicate crystal acted as the main crystalline phase, and the crystalline phase of fluorcanasite occurred at the heat treatment temperatures of 750 and 800°C. In addition, it was found that density, hardness, fracture strength, and CS increased while the translucency values decreased with increasing heat treatment temperatures. Furthermore, the CS increased dramatically when the fluorcanasite phases occurred in the glass-ceramic samples. The maximum density values, Vickers hardness, fracture toughness, and flexural strength are 2.56 g/cm³, 6.73 GPa, 3.38 MPa.m^1/2, and 259 MPa, respectively. These results may offer a possibility to design a new material for dental applications based on lithium disilicate-fluorcanasite glass-ceramics.     

Optimization of the Abencor system to extract olive oil from irrigated orchards

Studying the composition of olive oil requires cold‐press olive oil extraction. One of the most common laboratorial mills is the Abencor system. However, its operation protocol was formulated decades ago for Spanish olive varieties from traditionally rain‐fed orchards. We modified this protocol for use with “Barnea” and “Picual” olives from irrigated orchards that are characterized by high water content. Independent effects of malaxation time, temperature, water addition and talc addition on extraction efficiency, and major quality indices of virgin olive oil were studied. Overall, addition of talc to the fruit paste was the most significant treatment in terms of yield and quality of the oil although its effect was cultivar dependent. Improved oil yield was particularly significant for “Picual.” Extended malaxation time was also effective in improving oil extractability. Addition of talc generally improved oil‐quality parameters, while water addition had the opposite effect. Yet, quality parameters remained within the extra virgin level. Temperature increments reduced oil quality. The need to adapt a modified protocol for use with fruits from irrigated orchards that will facilitate critical comparison of results obtained from different agronomic theses and different laboratories is highlighted. It is recommended that each laboratory develops an appropriate protocol for the operation of the Abencor system in accordance to the characteristics of the olive fruit they are working with. Practical applications: Abencor system serves as the major laboratorial mill world‐wide. Those mills allow the researchers to characterize olive oil in accordance to the treatments received by the trees. This cannot be done in commercial mills. The system operation protocol was established decades ago for fruits from rain‐fed orchards. In the past decade there was a rapid increase in the use of irrigation in olive orchards and therefore it is crucial to optimize the operation protocol for fruit with relatively high water content. In the current work we have evaluated the influence of a series of technological parameters (i.e., talc and water addition, malaxation time, and temperature) on the extraction efficiency and quality indices of olive oil. This allowed us to present a modified protocol for the Abencor system operation suitable for olive fruit of irrigated orchards that will facilitate a reliable representation of the influence of different treatments on the yield and characteristics of the olive oil.     

A Model-Theoretic Approach for Recovering Consistent Data from Inconsistent Knowledge Bases

One of the most significant drawbacks of classical logic is its being useless in the presence of an inconsistency. Nevertheless, the classical calculus is a very convenient framework to work with. In this work we propose means for drawing conclusions from systems that are based on classical logic, although the information might be inconsistent. The idea is to detect those parts of the knowledge base that cause the inconsistency, and isolate the parts that are recoverable. We do this by temporarily switching into Ginsberg/Fitting multivalued framework of bilattices (which is a common framework for logic programming and nonmonotonic reasoning). Our method is conservative in the sense that it considers the contradictory data as useless and regards all the remaining information unaffected. The resulting logic is nonmonotonic, paraconsistent, and a plausibility logic in the sense of Lehmann.     

Analyzing the performance of a nanosatellite cluster-detector array receiver for laser communication

This work analyzes laser communication between a cluster of nanosatellites, which is a concentrated formation of small lightweight satellites and a ground station. The scenario under consideration is a cluster of nanosatellites communicating by means of a laser beam with a detector array receiver that is located on the earth's surface and equipped with a common optical system for all incoming beams. The beams are concentrated to spots over the detector plane by the receiver's optics. The detector array enables the ground station to communicate with a tight concentration of the nanosatellites, which reduces system complexity and cost. A critical parameter that determines the successful receipt and subsequent decoding of a transmitted signal for a given configuration is the angular separation between the satellites within the cluster. This separation must be retained to prevent critical overlapping of the spots on the detector's surface. The maximum allowable overlapping is calculated in terms of given bit-error rate. The spatial spreading of the beams, caused by scattering from aerosols in different layers of the atmosphere, is calculated for the case of single scattering. A stratified model of the atmosphere is used. Turbulence influences the beam width, especially for the case of short exposure, and is primarily caused by temperature changes, which result in fluctuations in the refractive index. In this research, a new approach is adopted for analyzing communication network performance through the atmosphere by applying optical-transfer function (OTF) concepts used in imaging and remote sensing. We evaluate the effectiveness of this new approach in applications where spatial spread between the users is very important.     

Stability,Sequentiality and Demand Driven Evaluation in Dataflow

We show that a given dataflow language l has the property that for any program P and any demand for outputs D (which can be satisfied) there exists a least partial computation of P which satisfies D, iff all the operators of l are stable. This minimal computation is the demand-driven evaluation of P. We also argue that in order to actually implement this mode of evaluation, the operators of l should be further restricted to be effectively sequential ones.     

eTuner: tuning schema matching software using synthetic scenarios

Most recent schema matching systems assemble multiple components, each employing a particular matching technique. The domain user mustthen tune the system: select the right component to be executed and correctly adjust their numerous “knobs” (e.g., thresholds, formula coefficients). Tuning is skill and time intensive, but (as we show) without it the matching accuracy is significantly inferior. We describe eTuner, an approach to automatically tune schema matching systems. Given a schema S, we match S against synthetic schemas, for which the ground truth mapping is known, and find a tuning that demonstrably improves the performance of matching S against real schemas. To efficiently search the huge space of tuning configurations, eTuner works sequentially, starting with tuning the lowest level components. To increase the applicability of eTuner, we develop methods to tune a broad range of matching components. While the tuning process is completely automatic, eTuner can also exploit user assistance (whenever available) to further improve the tuning quality. We employed eTuner to tune four recently developed matching systems on several real-world domains. The results show that eTuner produced tuned matching systems that achieve higher accuracy than using the systems with currently possible tuning methods.