The synthesis of tetrahedral bipyridyl metallo-octupoles with large second- and third-order nonlinear optical properties

Two new 4,4′-bis(donor)-6,6′-diphenyl- 2,2′-bipyridine ligands and their corresponding D_2d (Cu^I, Ag^I, Zn^II) octupolar metal complexes were synthesized, and their linear and nonlinear optical properties were investigated. A single crystal X-ray structure was also determined for the bis[4,4′-bis(diethylaminostyryl)-6,6′-diphenyl-bipyridine]copper(I) complex, which revealed a distorded pseudo-tetrahedral geometry. Molecular second-order nonlinear optical properties were determined for the complexes using the Harmonic Light Scatterring technique at 1.91 μm. These metallo-chromophores display large first hyperpolarizabilities β_1.91 in the range of 211-340 × 10⁻³⁰ esu, which increase with the Lewis acidity of the metal ion. The two-photon absorption properties of the bipyridyl ligands and related complexes were determined using either the two-photon emission method for fluorescent compounds or the open aperture Z-scan technique for non emissive ones. The complexes display red-shifted two-photon absorption bands compared to their metal-ion free chromophores, as well as a large increase of the maximum two-photon absorption cross-sections.     

Cognitive problems,self-rated changes in driving skills,driving-related discomfort and self-regulation of driving in old drivers

Ageing in general is associated with functional decline that may have an adverse effect on driving. Nevertheless, older drivers have been found to show good judgement and to self-regulate their driving, which may enable them to continue driving safely despite functional decline. The process of the self-monitoring of driving ability and the awareness of functional decline, and its association with the self-regulation of driving is, however, not fully understood. The aim of the present study was to examine the perceived changes in driving skills, the discomfort experienced in driving, and the self-regulation of driving as measured by the avoidance of certain driving situations by older drivers with different levels of self-rated cognitive problems. Eight hundred and forty Danish drivers aged 75–95 completed a structured telephone interview. The results showed that the recognition of cognitive problems was associated with an experience of improvement in higher level driving skills but also of a decline in lower level driving skills. Moreover, cognitive problems recognised by drivers were associated with discomfort in, and avoidance of, driving situations. Finally, a linear relationship between discomfort in driving and avoidance was found and this tended to be stronger for drivers recognising cognitive problems. The results indicate that older drivers who recognise problems with cognitive functions display good self-assessment of changes in their driving skills. In addition, the results suggest that driving-related discomfort is an important factor affecting the self-regulation of driving. Finally, the findings indicate that driving-related discomfort functions as an indirect self-monitoring of driving ability and may contribute to the safe driving performance of Danish older drivers.     

Biological effects of casein-derived tripeptide powders are not affected by fermentation process

Milk casein-derived biologically active tripeptides isoleucine–proline–proline and valine–proline–proline have shown antihypertensive effects both in animal and clinical studies. Contradictory findings from clinical intervention studies may be related to different manufacturing processes. The present study aimed to compare cardiovascular effects of two different tripeptide powders in spontaneously hypertensive rat (SHR). Rats received tripeptide powders produced either by Lactobacillus helveticus fermentation (A) or Lb. helveticus plus proline specific endoprotease (B) in drinking fluid for 8 weeks. Systolic blood pressure was recorded weekly. At the end, blood and tissue samples were collected and arterial responses studied. Blood pressure was 13.6 and 14.2 mmHg lower in the groups A and B, respectively, versus the water group (P < 0.01). Vascular responses of aorta and mesenteric artery did not differ between the groups. Both tripeptide products increased urinary cGMP (P < 0.001) and decreased albumin (P < 0.05). The fermentation process did not influence the cardiovascular effects of the tripeptide powders.     

Age-related differences in emotion recognition ability: A cross-sectional study.

Experimental studies indicate that recognition of emotions, particularly negative emotions, decreases with age. However, there is no consensus at which age the decrease in emotion recognition begins, how selective this is to negative emotions, and whether this applies to both facial and vocal expression. In the current cross-sectional study, 607 participants ranging in age from 18 to 84 years (mean age = 32.6 ± 14.9 years) were asked to recognize emotions expressed either facially or vocally. In general, older participants were found to be less accurate at recognizing emotions, with the most distinctive age difference pertaining to a certain group of negative emotions. Both modalities revealed an age-related decline in the recognition of sadness and—to a lesser degree—anger, starting at about 30 years of age. Although age-related differences in the recognition of expression of emotion were not mediated by personality traits, 2 of the Big 5 traits, openness and conscientiousness, made an independent contribution to emotion-recognition performance. Implications of age-related differences in facial and vocal emotion expression and early onset of the selective decrease in emotion recognition are discussed in terms of previous findings and relevant theoretical models. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Morphological controlled synthesis of micro-/nano-polyaniline

A novel, highly efficient and economical route is developed for the synthesis of polyaniline micro-/nanostructure. Materials were characterized by a complementary combination of X-ray diffraction, Scanning electron microscopy, Fourier-transform infrared, and UV-visible spectrophotometer. Morphology of polyaniline can be tailored by varying the structure-directing agents and pH of the synthesis condition. Ethylene glycol and polyethylene glycol formed a three-dimensional flower-like structure whereas block-copolymer (ethylene oxide and propylene oxide based co-polymer EO₂₀PO₇₀EO₂₀) formed leaf-like structure when the synthesis was performed at pH 7. Using these structure-directing agents, nanorod and granular morphologies were obtained when the samples were synthesized at pH 3 and 1, respectively.     

Comparison of the bone modeling effects caused by curved and straight nickel–titanium intramedullary nails

Nitinol (NiTi) shape memory metal alloy makes it possible to prepare functional implants. A curved intramedullary NiTi nail has been shown to cause bending of the bone, bone thickening, increase in cortical area, and reduction in bone longitudinal growth. The purpose of the present study was to find out whether these changes are caused by the bending force of the curved nail or by the intramedullary nailing itself. Pre-shaped intramedullary NiTi nails were implanted in the cooled martensitic form into the medullary cavity of the right femur in 12 rats, where they started to restore their austenitic form, causing a bending force. Straight nails were used as controls in another 12 rats. After 12 weeks, the operated femurs were compared with their non-operated contralateral counterparts and the differences were compared between the groups. Anteroposterior radiographs demonstrated bone bowing only in the curved nail group. Retardation of longitudinal growth was observed in both groups, showing that the growth effect seems to be due to the intramedullary nailing itself. Increase in bone cross-sectional area and cortical thickness were found in both groups. However, this increase was more evident with the curved nail, indicating that the bending force of the functional nail seems to induce these changes.     

Stable SOI micromachined electrostatic AC voltage reference

We have designed and manufactured a micromachined moving plate capacitor to be used as an AC voltage reference in electrical metrology. The reference is based on the characteristic AC current–voltage curve of the component having a maximum, the value of which ideally depends only on the geometry of the component and material properties of single crystalline silicon. The electrode surface stability is essential in this application and hence a new fabrication process has been developed to metallize both surfaces of an electrostatically actuated micromachined structure. The stability of the AC reference voltage at a frequency of 100 kHz and an RMS voltage value 6.4 V was measured to be ±60 ppm over 14 h.     

Photoconduction investigations in 75 MeV oxygen ion irradiated kapton-H polyimide

Photoconduction behaviour of 75 MeV oxygen ion irradiated (Fluences: 1.8 × 10¹¹, 1.8 × 10¹² and 1.8 × 10¹³ ions/cm²) kapton-H polyimide film in the visible region has been investigated at different temperatures ranging 400-2500 °C and at various electric fields ranging 40-600 kV/cm. A photoinduced exciton formation is the major source for providing charge carriers through thermolization and field-assisted dissociation processes. An attempt has been made to fit the field dependence of the steady state photocurrent to one of the several possible conduction mechanisms. In the high and low fluence (1.8 × 10¹³ and 1.8 × 10¹¹ ions/cm²) irradiated samples there exists a possibility of Poole-Frankel type of photoconduction mechanism, whereas at intermediate fluence (1.8 × 10¹² ions/cm²) a Schottky type photoconduction mechanism may be operative. The log I_ps versus 1/T plots consist of two straight lines with a knee point around 800-1000 °C. The activation energy estimated from the slope of these lines is field dependent varying from 0.40 to 0.73 eV and 0.18 to 0.23 eV above and below the knee point, respectively. This indicates the presence of more than one type of trapping levels in irradiated kapton-H polyimide.     

Infrastructure Management Information System Framework Requirements for Disasters

A three-tiered, enterprise, geographic information system architecture offers a robust, efficient, and secure platform to potentially revolutionize disaster management by enabling support of all of the phases of governmental activity that must occur before, during, and after a disaster. Presently, both publicly and privately initiated, computer-based systems designed for disaster management cannot meet the real-time data access and analysis needs at crucial stages, especially those occurring during an actual disaster. Impediments are reflective of the proprietary, stand alone, and segregated nature of current systems. This paper proposes an integrated, infrastructure management information system as a reliable and effective alternative. Issues related to sharing data, customizing applications, supporting multiple data formats, querying visually, facilitating ubiquitous computing, and upgrading are all addressed. Achieving maximum flexibility and capacity in a disaster management system relies upon recent advances in the following areas: (1) standardized data specifications; (2) middleware services; and (3) Web-enabled, distributed computing. Key resources in designing and implementing such an arrangement are prototyped in a system that was initially designed for addressing disaster management of urban explosions. The critical details of that system are presented herein.     

Single mode waveguide properties of m-NA doped Au/PVA nano-composites: Synthesis, characterization and studies

Meta-nitroaniline (m-NA) doped gold/polyvinyl alcohol (Au/PVA) nano-composites are prepared via in-situ reduction of gold salt by employing hydrazine hydrate (HH). Effect of the NLO (non-linear optical) active m-nitroaniline (m-NA) on the photo-physical properties of nano-particles of gold is studied in the colloidal as well as self-supported film form. The UV-Visible absorption bands between 530 and 555 nm due to surface plasmon resonance in Au nano-particles are observed. The absorption values show a shift in the position due to variation in m-NA with respect to the gold concentration. Additional absorption bands are observed after m-NA doping that influences the original position of gold absorption bands. The solutions and the films are further characterized by photoluminescence (PL), FTIR spectroscopy, XRD, TEM and thermal analysis. The particle size as shown by TEM is found to be less than 10 nm. Spin cast nano-composite films show single mode waveguide properties.