Cutoff frequencies and noise power law model of spectral density:adaptation of the multivariance method for irregularly spaced timingdata using the lowest-mode estimator approach

The concept of structure functions, which is an extension of the variance approach, is useful to determine the variance (the structure function) which is optimized for a type of noise and for an order of drift. The multivariance method was developed to use different variances over the same signal. It is then possible to select a set of variances in which each variance is optimized to the determination of one parameter (of one noise level, drift, or cutoff frequency). Recently, we adapted this method to irregularly spaced timing data. In this connection, we replaced the structure functions by another method of spectral density estimation: the lowest-mode estimator, introduced by J.E. Deeter and P.E. Boynton (1982, 1984) for the analysis of pulsar timing data. Different lowest-mode estimators can be constructed according to two priorities: the order of drifts that must be removed and the type of noise for which the sensitivity must be maximum. Thus, a multivariance system is developed using a set of different estimators. The details of this method are described, and the results for different signals are discussed in this paper     

Some factors affecting the electrical properties of carbon-black-loaded butyl rubber during vulcanization

Butyl rubber mixtures loaded with 70 phr general purpose furnace black (GPF) and tetramethyl thiuram disulphide (TMTD)/S as vulcanizing system were prepared. The kinetics of their electrical conductivity development during the vulcanization process were followed by using an especially devised system. It was found that the increase in the electrical conductivity during vulcanization obeys an exponential growth function with time constant τ, which markedly decreases with increasing vulcanization temperature as well as with the efficiency of the vulcanizing system. After completion of the vulcanization process, about 80 min, the samples obtained possess reasonable stability and reproducibility of electrical conductivity.     

A chemical method for preparation of cobalt oxide thin films

A very simple method has been developed for the preparation of cobalt oxides, CoO(OH) and Co₃O₄, thin films on glass substrates using cobalt(II) chloride and ammonia as reacting agents. These materials were characterized by optical and electrical measurements. CoO(OH) films are insulating and have DC dielectric breakdown at about 3700 V / mm when measurements are made using silver print electrodes placed at various spacings on the film. Electrical resistivity of Co₃O₄ is 2.5 ω m. Analysis of the absorption spectra shows that CoO(OH) and CO₃O₄ have optical band gaps of 2.36 eV and 1.65 eV respectively. Spectral variation of the optical constants of these materials have also been measured.     

Subspace-based signal analysis using singular value decomposition

A unified approach is presented to the related problems of recovering signal parameters from noisy observations and identifying linear system model parameters from observed input/output signals, both using singular value decomposition (SVD) techniques. Both known and new SVD-based identification methods are classified in a subspace-oriented scheme. The SVD of a matrix constructed from the observed signal data provides the key step in a robust discrimination between desired signals and disturbing signals in terms of signal and noise subspaces. The methods that are presented are distinguished by the way in which the subspaces are determined and how the signal or system model parameters are extracted from these subspaces. Typical examples, such as the direction-of-arrival problem and system identification from input/output measurements, are elaborated upon, and some extensions to time-varying systems are given     

Void fraction and pressure drop in two-phase liquid metal flows in channels

Experimental results on void fraction and friction pressure drop in vapour-potassium flows in the high-vapour-quality region up to unity are presentéd. The experimental data obtained and the pertinent results of other authors are generalized, and empirical relationship are suggested to calculate void fraction and pressure drop in two-phase liquid metal flows for channels of various configurations and orientations. The relationships are valid within the range of vapour qualities from almost zero to unit. The experimental data prove the mass velocity to have no influence on the hydrodynamic characteristics within the range of the parameters investigated. It is found in the experiments with heat supply that friction pressure losses are smaller than those for adiabatic conditions. It is shown that this result is in good correspondence with the model of the effect of injection in a boundary layer on the value of shear stresses between cases.     

Pathology of Toxoplasma gondii infection in the nude rat. An experimental model of toxoplasmosis in the immunocompromised host?

Genetically athymic nu/nu (nude) rats, deficient in T cells, die from infection with various Toxoplasma gondii strains, including RH and Prugniaud strains. In contrast, these strains cause chronic infections without apparent symptoms in immunocompetent non-nude rats. We show here that nude rats die in two to three weeks after RH infection and three to four weeks after Prugniaud infection. Histological examination of brains from nude rats at different time points after infection, revealed an absence of lesions after RH strain infection and cysts with usually no inflammation after Prugniaud infection. Lungs from nude rats developed a fibrin alveolitis using either strain, whereas myocarditis with focal areas of necrosis were observed only after Prugniaud infection. Cysts and, in some cases, tachyzoites in the necrotic lesions were easily identifiable. The two strains of T. gondii elicited in nude rats a granulomatous hepatitis that only differed in intensity. Spleen and mesenteric lymph nodes appeared totally non reactive in both cases. This model allows immunological and parasitological studies by comparison with immunocompetent rat infection. Published data concerning toxoplasma pathology in AIDS, therefore, suggest that acute toxoplasma infection in nude rats may be a useful model for studying disseminated forms of toxoplasma infection found in AIDS patients.     

Semantic priming after severe closed head trauma: Automatic and attentional processes.

The 2-process theory of semantic priming (J. H. Neely, 1977; M. I. Posner and C. R. Snyder, 1975) was used to determine the maintenance of automatic processes after severe closed head injury (CHI) and to determine whether processes that demand attention suffer a deficit. Ss with severe CHI (N?=?18,?>?2 yrs postinjury) and 18 matched control Ss completed a lexical decision task in which a category prime was followed by a target. Automatic and attentional priming were determined by orthogonally varying prime–target relatedness, expectancy, and stimulus onset asynchrony. Although the CHI Ss had slower reaction times (RTs) overall, there were no significant group differences in the magnitude of either the automatic or attentional component of semantic priming. The present results indicate the integrity of semantic processes and normal semantic priming in long-term patients with severe CHI. The results are discussed in relation to an attentional resource hypothesis. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Improved column-switching liquid chromatographic method for the determination of the enantiomers of mefloquine

A liquid chromatographic method for the determination of the enantiomers of mefloquine has been improved. The chromatography involved two columns: an achiral cyanopropyl stationary phase for the quantification of (+/-)-mefloquine and a chiral naphthyl-urea stationary phase for the determination of the enantiomeric ratio. Compared with the previous method, which needed two detectors, this one used one detector-integrator to which the two columns are connected alternately by an automated column-switching system. The method is suitable for the quantification (0.05 microgram/ml) of mefloquine and the determination of enantiomeric ratios from 500-microliters plasma samples with ultraviolet detection.     

Lipopolysaccharide primes human alveolar macrophages for enhanced release of superoxide anion and leukotriene B4: self-limitations of the priming response with protein synthesis

Human alveolar macrophages (AM) can produce potent reactive oxygen intermediates (ROI) and arachidonic acid metabolites (eicosanoids), which have important roles in host defense and the pathogenesis of some diseases of the lung. Bacterial lipopolysaccharide (LPS) is believed to cause profound lung injury and can prime mouse peritoneal macrophages for the enhanced secretion of ROI and eicosanoids. Therefore, we investigated the effect of LPS pretreatment on the ability of AM to release superoxide anions (O2-) and leukotriene B4 (LTB4). LPS can prime AM for the enhanced secretion of O2- and LTB4, regardless of whether they are derived from nonsmokers or smokers. Moreover, judging from the time-response characteristics, this priming for LTB4 release could be inhibited in the later stages of pretreatment, when the O2(-)-releasing capacity was enhanced. The priming inhibition was prevented, at least in part, by cycloheximide, but not by SOD and/or catalase. In addition, cycloheximide also inhibited the priming for O2- release. Hence, protein synthesis might be necessary for the priming for O2- release and for inhibiting the priming for LTB4 release. This phenomenon of self-limiting the priming response with LPS seems to be very important when we consider the high oxygen tension in the lungs and the many bacterial substances inspired into alveoli.     

THE INFLUENCE OF LOAD MISALIGNMENT DURING UNIAXIAL LOW-CYCLE FATIGUE TESTING—I: MODELLING

Abstract— A quantitative model has been proposed which predicts the extent of lifetime scatter in low-cycle fatigue due to the influence of bending caused by load misalignment. The main components of the model are the mechanism of bending, the type of extensometer used to control strain and the fatigue characteristics of the material being assessed. Three mechanisms of bending have been studied and it is argued that the most damaging one is a consequence of a lateral offset in the centre-lines of the load-train with respect to either a machine's frame or ram. Scatter in lifetime is a maximum when strain is controlled by a single extensometer (which is generally the case) and when fatigue behaviour is dictated by crack initiation at the largest surface defect. Two types of scatter have been examined, (i) repeatability scatter due to testing practice within a single laboratory, and (ii) reproducibility scatter between laboratories. An example of the magnitude of reproducibility scatter due to bending has been given by using an equation based on the universal slopes method due to Manson.