Photosensitized free radical polymerization using pyridinium salts

Summary The polymerization of methyl methacrylate (MMA), ethyl acrylate (EA), styrene (St) and 2-vinyl pyridine (VP) is initiated upon irradiation at >350 nm of dichloromethane solutions containing N-ethoxy-2-methylpyridinium hexafluorophosphate (EMP⁺PF₆ ^-) and anthracene or thioxanthone. Initiation mechanisms involving the formation of ethoxyl radicals during the decomposition of EMP⁺ ions via electron transfer are proposed.     

Genetic algorithm based approaches to solve the order batching problem and a case study in a distribution center

Journal of Intelligent Manufacturing - The order batching problem is a combinatorial optimization problem that arises in the warehouse order picking process. In the order batching problem, the aim...     

The Training of Pi-Sigma Artificial Neural Networks with Differential Evolution Algorithm for Forecasting

Computational Economics - Looking at the artificial neural networks’ literature, most of the studies started with feedforward artificial neural networks and the training of many feedforward...     

Electrical and Dielectric Properties of Y<Superscript>3+</Superscript>-Substituted Barium Hexaferrites

In this study, Y³⁺ ion-substituted M-type barium hexaferrites (BaM; BaFe₁₂O₁₉) were fabricated via facile ceramic route. As-prepared powders were characterized by X-ray powder diffractometry (XRD), Fourier transform infrared (FT-IR) spectroscopy, and impedance spectroscopy. XRD (Rietveld) analyses confirmed the presence of a single characterization of all samples (except x = 0.0 and 0.1 samples). The crystallite sizes of products are found in the range of 47.2–63.2 nm. Spectral analysis (FT-IR) also presented the formation of spinel structure for all products. The ac conductivity of the substituted samples was found to initially decrease slightly with increase in Y³⁺ compared with unsubstituted, and then variation tendency changes at the medium substitution ranges are observed with a different attitude against temperature. In the end, the lower conductivity for high substitutions is recorded and increases as functions of frequency while it also increases with the elevation of temperature. It was observed that ac conductivities of products increased by increasing frequency which indicate that observed ac conductivity is due to both electronic and polaron hopping mechanism.     

A Novel and Facile Route to Synthesize Atomic‐Layered MoS2 Film for Large‐Area Electronics

High‐quality and large‐area molybdenum disulfide (MoS₂) thin film is highly desirable for applications in large‐area electronics. However, there remains a challenge in attaining MoS₂ film of reasonable crystallinity due to the absence of appropriate choice and control of precursors, as well as choice of suitable growth substrates. Herein, a novel and facile route is reported for synthesizing few‐layered MoS₂ film with new precursors via chemical vapor deposition. Prior to growth, an aqueous solution of sodium molybdate as the molybdenum precursor is spun onto the growth substrate and dimethyl disulfide as the liquid sulfur precursor is supplied with a bubbling system during growth. To supplement the limiting effect of Mo (sodium molybdate), a supplementary Mo is supplied by dissolving molybdenum hexacarbonyl (Mo(CO)₆) in the liquid sulfur precursor delivered by the bubbler. By precisely controlling the amounts of precursors and hydrogen flow, full coverage of MoS₂ film is readily achievable in 20 min. Large‐area MoS₂ field effect transistors (FETs) fabricated with a conventional photolithography have a carrier mobility as high as 18.9 cm² V^?1 s^?1, which is the highest reported for bottom‐gated MoS₂‐FETs fabricated via photolithography with an on/off ratio of ≈10⁵ at room temperature.     

Effect of stents coated with a combination of sirolimus and alpha-lipoic acid in a porcine coronary restenosis model

The aim of this study was to evaluate antiproliferative sirolimus- and antioxidative alpha-lipoic acid (ALA)-eluting stents using biodegradable polymer [poly-l-lactic acid (PLA)] in a porcine coronary overstretch restenosis model. Forty coronary arteries of 20 pigs were randomized into four groups in which the coronary arteries had a bare metal stent (BMS, n = 10), ALA-eluting stent with PLA (AES, n = 10), sirolimus-eluting stent with PLA (SES, n = 10), or sirolimus- and ALA-eluting stent with PLA (SAS, n = 10). A histopathological analysis was performed 28 days after the stenting. The ALA and sirolimus released slowly over 30 days. There were no significant differences between groups in the injury or inflammation score; however, there were significant differences in the percent area of stenosis (56.2 ± 11.78 % in BMS vs. 51.5 ± 12.20 % in AES vs. 34.7 ± 7.23 % in SES vs. 28.7 ± 7.30 % in SAS, P < 0.0001) and fibrin score [1.0 (range 1.0–1.0) in BMS vs. 1.0 (range 1.0–1.0) in AES vs. 2.0 (range 2.0–2.0) in SES vs. 2.0 (range 2.0–2.0) in SAS, P < 0.0001] between the four groups. The percent area of stenosis based on micro-computed tomography corresponded with the restenosis rates based on histopathological stenosis in different proportions in the four groups (54.8 ± 7.88 % in BMS vs. 50.4 ± 14.87 % in AES vs. 34.5 ± 7.22 % in SES vs. 28.9 ± 7.22 % in SAS, P < 0.05). SAS showed a better neointimal inhibitory effect than BMS, AES, and SES at 1 month after stenting in a porcine coronary restenosis model. Therefore, SAS with PLA can be a useful drug combination for coronary stent coating to suppress neointimal hyperplasia.     

Highly Exposed ?NH2 Edge on Fragmented g-C3N4 Framework with Integrated Molybdenum Atoms for Catalytic CO2 Cycloaddition: DFT and Techno-Economic Assessment

This study focuses on the applicability of single-atom Mo-doped graphitic carbon nitride (GCN) nanosheets which are specifically engineered with high surface area (exfoliated GCN),  NH₂ rich edges, and maximum utilization of isolated atomic Mo for propylene carbonate (PC) production through CO₂ cycloaddition of propylene oxide (PO). Various operational parameters are optimized, for example, temperature (130 °C), pressure (20 bar), catalyst (Mo₂GCN), and catalyst mass (0.1 g). Under optimal conditions, 2% Mo-doped GCN (Mo₂GCN) has the highest catalytic performance, especially the turnover frequency (TOF) obtained, 36.4 h⁻¹ is higher than most reported studies. DFT simulations prove the catalytic performance of Mo₂GCN significantly decreases the activation energy barrier for PO ring-opening from 50–60 to 4.903 kcal mol⁻¹. Coexistence of Lewis acid/base group improves the CO₂ cycloaddition performance by the formation of coordination bond between electron-deficient Mo atom with O atom of PO, while  NH₂ surface group disrupts the stability of CO₂ bond by donating electrons into its low-level empty orbital. Steady-state process simulation of the industrial-scale consumes 4.4 ton h⁻¹ of CO₂ with PC production of 10.2 ton h⁻¹. Techno-economic assessment profit from Mo₂GCN is estimated to be 60.39 million USD year⁻¹ at a catalyst loss rate of 0.01 wt% h⁻¹.     

Periodic orbits: a new language for neuronal dynamics

A new nonlinear dynamical analysis is applied to complex behavior from neuronal systems. The conceptual foundation of this analysis is the abstraction of observed neuronal activities into a dynamical landscape characterized by a hierarchy of "unstable periodic orbits" (UPOs). UPOs are rigorously identified in data sets representative of three different levels of organization in mammalian brain. An analysis based on UPOs affords a novel alternative method of decoding, predicting, and controlling these neuronal systems.