Micro- and nanostructured Al2O3 surfaces for controlled vascular endothelial and smooth muscle cell adhesion and proliferation

The effect of the micro- and nanotopography on vascular cell-surface interaction is investigated using nano- and microstructured Al₂O₃ as model substrate. Two different nanostructured Al₂O₃ surfaces composed of low density (LD) and high density (HD) nanowires (NWs) were synthesized by chemical vapour deposition (CVD) and commercially available microstructured Al₂O₃ plates were used for comparison. A clear diverging response of human umbilical vein endothelial cells (HUVEC) and human umbilical vein smooth muscle cells (HUVSMC) was observed on these nano- and microstructured surfaces. LD Al₂O₃ NWs seem to enhance the proliferation of HUVECs selectively. This selective control of the cell-surface interaction by topography may represent a key issue for the future stent material design.     

Bathroom as a modern space

Mundane objects and their everyday practices contain clues to the prevalent ideas and ideals of a society at a certain time; thus holding the power to decipher collective ideologies, contemporary beliefs, social norms and shared values. Bathroom fixtures are such ordinary products of the built environment that seem to be simultaneously insignificant and indispensable parts of daily life. This study is an historical analysis of the bathroom as a social space and of its fixtures as material culture. It reflects ideas and identities around the convoluted notions of modernisation and Westernisation in the Turkish context. It suggests that the values of being modern contributed to the transformation of traditional bathroom practices through spatial mechanisms and equipment. To unpack these values, the study engages the examination of oral histories, literary works, journals and flat plans as well as extant bathrooms. The research shows that the bathroom is a product of global modernity. Mediated through flats, which proliferated as a sign of contemporary living, the Western-style bathroom became the norm while its traditional counterpart became its other. This shift in perception indicates a concern for belonging to the world civilisation in the form of an aspiration toward being Western. A universal idea of modernisation pervades the ordinary domestic space of the bathroom and its everyday practices.     

Surface-modified alumina nanoparticles-filled aramid fiber-reinforced epoxy nanocomposites: preparation and mechanical properties

Iranian Polymer Journal - Surface of Al2O3 nanoparticles was modified with a silane coupling agent, and aramid fiber-reinforced epoxy nanocomposites were produced using these particles. Three...     

Gold recovery from dilute gold solutions using DEAE-cellulose

The present work investigates gold recovery using DEAE-cellulose, a common biopolymer derivative, from synthetically prepared diluted gold-bearing solutions of 50 ppm. The effects of different recovery parameters on gold recovery efficiency were studied in detail. It was demonstrated that gold recovery efficiency increased with an increasing amount of sorbent, as well as increasing contact time. A gold recovery efficiency of 99% was attained under conditions of 20–40 g DEAE-cellulose per liter at a shaking rate of 130 rpm for 30 min at room temperature. On the other hand, with smaller amounts of sorbent (6 g/l), it was also possible to recover gold from the solution with 99% efficiency when the reaction temperature was increased to 60 °C. The shaking rate and temperature were demonstrated to play a vital role in the recovery process. It was also found that gold recovery by DEAE-cellulose is an intermediate-controlled process with an activation energy of 37.11 kJ/mol. The XRD pattern and SEM images revealed that the recovered gold was in the metallic form.     

Optimal space-frequency Group codes for MIMO-OFDM system

Space-frequency (SF) group codes are designed for multiple-input multiple-output orthogonal frequency-division multiplexing (MIMO-OFDM) systems. A rather general channel model is assumed, where the channel is frequency-selective Rayleigh fading with arbitrary power-delay profile. It is shown that the SF group code has a symmetric distance structure like the space-time group code, if the group consists of diagonal matrices. A scenario where the multiple codewords are loaded onto the subcarriers of the OFDM system in parallel is considered. The optimality condition on the choice of subcarrier allocation is found, and an optimal subcarrier-allocation scheme is proposed. A transmit scheme where rotated versions of the same signal are transmitted from different transmit antennas is proposed, and it is shown that it satisfies the optimality condition. Then matrix groups are designed which guarantee that the resulting SF codes are full rank. Numerical comparisons with recently published techniques in the literature verify our improved performance.     

Characterization and lime treatment of olive mill wastewater

Seventeen olive mill wastewater (OMW) samples were characterized. For characterization of the samples, amount of total, fixed, volatile, suspended, volatile-suspended solids, COD, oil-grease, polyphenol, volatile phenol, nitrogen and reducing sugar were determined. Effects of lime treatment on the waste samples were investigated. Reduction of contents of the samples treated with the lime was described. The effect of the addition of lime on an artificial phenolic mixture was also examined.     

Frequency-dependent conductivity in unannealed thin films of As0.40Se0.40Te0.20

Direct current (d.c.) and alternating current (a.c.) conductivity measurements have been performed on unannealed amorphous As_0.40Se_0.40Te_0.20 thin films. The d.c. measurements were performed at temperatures between 143 K and 343 K. The d.c. behaviour of the samples indicates different hopping conduction mechanisms between 143 K-210 K and 210 K-343 K. The a.c. measurements were performed at temperatures between 143 K and 300 K and at frequencies between 110 Hz and 1 MHz. The a.c. conductivity of the films is well represented by the form Cω^s where C and s are found to be temperature dependent parameters. The data are found to fit the correlated barrier hopping model, especially at low temperatures. The comparison of a.c. data with the unified theory of the extended pair approximation shows that the results fit to the quasi universal law predicted by this model, however, qualitative calculations give unreasonable values for the decay parameter α and the exponent l.     

Effect of austenitization heat treatment on the magnetic properties of Fe-40wt % Ni-2wt % Mn alloy

The effect of austenitization heat treatment on magnetic properties was examined by means of M6ssbauer spectroscopy on an Fe-40wt%Ni-2wt%Mn alloy. The morphology of the alloy was obtained by using scanning electron microscopy （SEM） under different heat treatment conditions. The magnetic behavior of the non heat-treated alloy is ferromagnetic. A mixed magnetic structure including both paramagnetic and ferromagnetic states was obtained at 800℃ after 6 and 12 h heat treatments. In addition, the magnetic structure of the heat-treated alloy at 1150~C for 12 h was ferromagnetic. With the volume fraction changing, the effective hyperfine field of the ferromagnetic austenite phase and isomery shift values were also determined by Mtssbauer spectroscopy.     

Reduced myofibroblast differentiation on femtosecond laser treated 316LS stainless steel

In-stent restenosis is a common complication after stent surgery which leads to a dangerous wall narrowing of a blood vessel. Laser assisted patterning is one of the effective methods to modify the stent surface to control cell–surface interactions which play a major role in the restenosis. In this current study, 316LS stainless steel substrates are structured by focusing a femtosecond laser beam down to a spot size of 50 μm. By altering the laser induced spot density three distinct surfaces (low density (LD), medium density (MD) and high density (HD)) were prepared. While such surfaces are composed of primary microstructures, due to fast melting and re-solidification by ultra-short laser pulses, nanofeatures are also observed as secondary structures. Following a detailed surface characterization (chemical and physical properties of the surface), we used a well-established co-culture assay of human microvascular endothelial cells and human fibroblasts to check the cell compatibility of the prepared surfaces. The surfaces were analyzed in terms of cell adherence, proliferation, cell morphology and the differentiation of the fibroblast into the myofibroblast, which is a process indicating a general fibrotic shift within a certain tissue. It is observed that myofibroblast proliferation decreases significantly on laser treated samples in comparison to non-treated ones. On the other hand endothelial cell proliferation is not affected by the surface topography which is composed of micro- and nanostructures. Such surfaces may be used to modify stent surfaces for prevention or at least reduction of restenosis.