新型饲料泵在熟料窑饲料中的应用

针对熟料饲料油隔泵供料压力不稳定、消耗油及备件量大、检修频繁的情况,着重介绍和探讨了对新型离心泵的选型、可行性分析、过流件材质及密封的选择、新型饲料泵的成功应用.     

Al-Zn-Ce非晶合金的相选择与组织结构演化

本文研究了具有典型分解特征的Al-Zn-Ce非晶合金的形成和晶化过程，探讨了各种相的生成顺序。XRD和DSC测试结果表明强烈的化合物短程序有利于Al-Zn-Ce非晶合金的形成。在Al-Zn-Ce非晶合金的晶化过程中存在复杂的相选择行为，多种相的竞争形核和有限生长使其具有复杂的结构特点。同时，结果也表明冷速对该体系非晶的形成有很大影响。     

印品质量控制中的密度测量与色度测量

在印刷品质量控制中为了得到更多的可靠数值,越来越多地选择用仪器测量法来代替主观评价法.这就是密度测量法和色度测量法.     

Intelligent Painting Process Planner for Robotic Bridge Painting

Due to increased government regulations on environment, health, and safety, the cost of on-site bridge painting has quadrupled over the past several years. The construction industry faces a great challenge in how to control the increased costs of bridge painting and meet the regulations at the same time. A possible solution to address this challenge is to develop a robotic bridge painting system. The development of the robotic system can be justified by the potential improvements in safety and productivity. This paper presents the development and testing of an Intelligent Painting Process Planner. The Planner, built based on bridge feature scheme, is the key component for the robotic bridge painting system that integrates the painting process planning, robot path planning, cost optimization, and quality control functions. During the development process, lab experiments were conducted to determine the values of painting process planning parameters and coating thickness distribution functions. Field tests demonstrated that the prototype robotic bridge painting system achieved the specified painting quality using the parameter values provided by the Planner. Areas that need to be improved in the future were also identified.     

Model of Primary Austenite Dendrite Structure in Hypoeutectic Cast Iron

Ｉｔｗａｓｒｅｐｏｒｔｅｄ[1] ｔｈａｔｔｈｅｍｉｃｒｏ ｓｔｅｒｅｏｓｔｒｕｃｔｕｒｅｏｆｐｒｉｍａｒｙａｕｓｔｅｎｉｔｅｉｎｃａｓｔｉｒｏｎｃｏｎｓｉｓｔｓｏｆｐｒｉｍａｒｙｓｔｅｍｓａｎｄｓｅｃｏｎｄａｒｙａｒｍｓｔｈａｔ ｇｒｏｗａｃｃｏｒｄｉｎｇｔｏｄｅｎｄｒｉｔｅｃｒｙｓｔａｌｓｂｒａｎｃｈｒｕｌｅ ,ａｎｄｓｏｍｅｏｆｐｒｉｍａｒｙａｕｓｔｅｎｉｔｅｅｖｅｎｈａｖｅｔｈｉｒｄａｒｍｓ .ＭｉｙａｋｅＨｅｔａｌ[2 ]ｐｒｏｐｏｓｅｄａｃｏｎｃｅｐｔｏｆｒｅｇｉｏｎｍｏｄｅｌｂｙｓｔｕｄｙｉｎｇ…     

岩土体斜(边)坡滑坡发生的机理

根据滑坡发生的初始条件、滑坡成因及方式表象,对常见的蠕变倾覆滑坡、卸荷滑坡、震动液化平推滑坡、潜蚀塌陷滑坡、溶蚀下陷滑坡、孔隙水压浮动滑坡和人工切蚀或冲(浪)蚀—加载滑坡等机理进行了分析.     

Dielectric and piezoelectric properties of Pb(Ni1/3Nb2/3)O3–PbTiO3–PbZrO3 ceramics modified with bismuth and zinc substitutions

The dielectric and piezoelectric properties of the (Pb_0.985Bi_0.01)(Ni_1/4Zn_1/12Nb_2/3)_x- (Zr_σTi_1-σ)_1-xO₃ piezoelectric ceramic system (0.2 ≤ x ≤ 0.7, 0.1 ≤ σ ≤ 0.9) were systematically investigated. The results showed that, after poling, the dielectric constant, ε ₃₃ ^T , increased for the tetragonal compositions but decreased for the rhombohedral compositions. Furthermore, high values of ε ₃₃ ^T and piezoelectric modulus, d ₃₁ were found for the compositions along the extension of the morphotropic phase boundary. The highest values of the planar electromechanical coupling factor, K _p, and the piezoelectric modulus, d ₃₁, were found to be 0.70 and − 274 × 10^-12 C N^-1, respectively. The Curie temperature, remanent polarization, coercive field and the lattice constants of the a and c axes in relation to the Pb(Ni_1/3Nb_2/3)O₃ content and the Zr/Zr + Ti ratio were also determined. This revised version was published online in November 2006 with corrections to the Cover Date.     

激光平网雕刻机设计

研制了用于制作平面网版的激光雕刻机，设计了雕刻机用CO2激光器、光路系统及单片机控制系统，探讨了将图像文件转化为控制命令文件的方法。     

Hydrogen Permeation and Diffusion in Amorphous Alloy Ni_(68)Cr7_Si_8B_(14)Fe_3 at Elevated Temperature

The behaviour of hydrogen permeation and diffusion in amorphous alloy Ni68Cr7Si8B14Fe3 hasbeen investigated by an ultrahigh vacuum gas permeation technique. A comparison experimentwas carried out between the as-quenched and annealed States (400℃/2h) of the amorphousalloy. The results show that, for both states of the amorphous alloy in the temperature rangeof 200～350℃, the diffusivity and permeability of hydrogen are in agreement with Arrheniusrelationship, there does not exist H-trapping effect, and the activation energies of diffusion andpermeation almost keep the same.