Surface free energy of CrNx films deposited using closed field unbalanced magnetron sputtering

CrN_x thin films have attracted much attention for semiconductor IC packaging molding dies and forming tools due to their excellent hardness, thermal stability and non-sticking properties (low surface free energy). However, few data has been published on the surface free energy (SFE) of CrN_x films at temperatures in the range 20-170 °C. In this study CrN_x thin films with CrN, Cr(N), Cr₂N (and mixture of these phases) were prepared using closed field unbalanced magnetron sputtering at a wide range of Cr⁺² emission intensity. The contact angles of water, di-iodomethane and ethylene glycol on the coated surfaces were measured at temperatures in the range 20-170 °C using a Dataphysics OCA-20 contact angle analyzer. The surface free energy of the CrN_x films and their components (e.g., dispersion, polar) were calculated using the Owens-Wendt geometric mean approach. The influences of CrN_x film surface roughness and microstructure on the surface free energy were investigated by atomic force microscopy (AFM) and X-ray diffraction (XRD), respectively. The experimental results showed that the lowest total SFE was obtained corresponding to CrN at temperature in 20 °C. This is lower than that of Cr(N), Cr₂N (and mixture of these phases). The total SFE, dispersive SFE and polar SFE of CrN_x films decreased with increasing surface temperature. The film roughness has an obvious effect on the SFE and there is tendency for the SFE to increase with increasing film surface roughness.     

Harmonic Analysis on the Compact Homogeneous Spaces──about Fourier Multiplier ofH~P（M） Space

ＨａｒｍｏｎｉｃＡｎａｌｙｓｉｓｏｎｔｈｅＣｏｍｐａｃｔＨｏｍｏｇｅｎｅｏｕｓＳｐａｃｅｓ──ａｂｏｕｔＦｏｕｒｉｅｒＭｕｌｔｉｐｌｉｅｒｏｆＨ~Ｐ（Ｍ）Ｓｐａｃｅ￥ＤｏｎｇＤａｏｚｈｅｎ；ＺｈｅｎｇＸｕｅａｎ（ＨｅｎａｎＵｎｉｖｅｒｓｉｔｙ，Ｋａｉ?..     

偶氮苯衍生物三阶非线性的四波混频研究

用皮秒Ｎｄ：ＹＡＧ激光器的倍频光（５３２ｎｍ）对具有离域π－共轭电子云结构的偶氮苯类样品材料作简并四波混频补给，测得三阶非线性电极化率ｘ＾（３）和它们的时间响应分别为１０＾－９ｅｓｕ和２０ｐｓ，并对影响ｘ＾（３）的瞬时光栅作用和ｘ＾（３）的响应时间人了讨论。     

天然树脂局部结构的径向分布函数研究

本工作用x射线衍射技术分析计算了二种天然树脂的局部结构参数,由测得的衍射强度数据求出了它们的结构因子I(r)和径向分布函数RDF(r),并由此得到了分子链内临近原子和次临近原子平均间距、配位数和短程有序畴。     

Influence of Cr interlayer on the structure and optical properties of Ag films on glass substrate by magnetron sputtering

Optical properties and microstructure of Ag film on glass substrate with Cr intermediate layer were studied by using spectrophotometer and XRD. The spectra results showed that introducing Cr intermediate layer reduced the surface roughness and promoted the reflectivity of Ag film. The XRD analysis showed that the crystalline grains increased and the stress decreased. The adhesion was also improved by using the tape test method.     

Preparing polymer brushes on polytetrafluoroethylene films by free radical polymerization

Films of polytetrafluoroethylene (PTFE) were exposed to sodium naphthalenide (Na/naphtha) etchant so as to defluorinate the surface for obtaining hydroxyl functionality. Surface-initiators were immobilized on the PTFE films by esterification of 4,4′-azobis(4-cyanopentanoic acid) (ACP) and the hydroxyl groups covalently linked to the surface. Grafting of polymer brushes on the PTFE films was carried out by the surface-initiated free radical polymerization. Homopolymers brushes of methyl methacrylate (MMA) were prepared by free radical polymerization from the azo-functionalized PTFE surface. The chemical composition and topography of the graft-functionalized PTFE surfaces were characterized by X-ray photoelectron spectroscopy (XPS), attenuated total reflectance (ATR) FT-IR spectroscopy and atomic force microscopy (AFM). Water contact angles on PTFE films were reduced by surface grafting of MMA.     

On the deformation and fracture of porous materials

The constitutive behavior of porous materials (including the yield loci, the void growth rate, the macro stress-strain relation and the strain to localization instability) is examined based on the lower bound approach proposed by the present authors. These results are then compared with the experimental and the finite element results as well as those predicted by Gurson's equations. Emphasis is placed on approaching the real behavior from the upper and the lower bound analysis. Calculation is also made on the influence of void nucleation on the critical strain to instability and a modified strain-controlled nucleation criterion is proposed. Finally the instability and fracture of AISI4340 steel in plane strain tension is examined and comparison is made between theoretical and experimental results.     

带有弹性碰撞的离散的凝结方程

带有弹性碰撞的离散的凝结方程是反映粒子增长动力学的数学模型，它刻划了这样一种粒子反应系统；系统中任意两个粒子碰撞后一定的概率或者凝结成为更大的粒子，或者发生弹性碰撞．本文研究了这一系统发生冻肢的可能性，并给出了一个充分条件．     

非园断面通道层流摩擦阻力与换热理论研究的新进展

本文介绍作者近些年来对椭圆、矩形、扇形、任意三角形、正多边形、环形等各种非圆断面通道层流摩擦阻力与换热理论的研究成果，给出大量新的速度与温度场表达式，以及摩擦阻力与换热的新的计算公式。本文对传统的层流阻力与换热理论进行了一次系统的补充与完善，同时考虑到工程需要，对所有繁杂的理论公式都进行了化简，给出形式简单而且精度相当高的近似公式。     

HL－1装置中LHCD和等离子体参数的关系

本文研究了在ＨＬ－１托卡马克的不同放电阶段的低混杂波驱动特性。给出了驱动电流及驱动效率和等离子体参数，如电子平均密度ｎｅ、等离子体电流Ｉｐ及纵向磁场的关系。也给出和分析了波驱动和入射波功率的关系。在放电平段，对正反向驱动效率进行了研究和比较。