硅胶-氰丙基复合固相萃取柱分离原油中饱和烃及芳烃组分

探讨了硅胶-氰丙基(SiO2/C3-CN,(1 g/0.5 g,6 mL))复合固相萃取柱分离与净化原油中饱和烃和芳烃组分的方法。结果表明:SiO2/C3-CN复合固相萃取柱较单一硅胶(SiO2)小柱的分离效果好,仅使用4.5 mL正己烷和4.5 mL正己烷-二氯甲烷(1∶1)洗脱即可实现饱和烃和芳烃组分的完全分离与满意回收(回收率分别为98%和99%);而单一硅胶小柱存在低环数芳烃化合物(如萘及其甲基系列、苊等)与饱和烃组分的共洗脱现象。通过对原油实物样品的测定,饱和烃和芳烃组分在硅胶-氰丙基复合柱上经正己烷、正己烷-二氯甲烷(体积比1∶1)的洗脱行为与标准混合液完全一致,该方法实用可靠、流程简单、试剂消耗少、精密度良好(RSD为4.2%～8.5%),适用于石油样品中饱和烃和芳烃组分的定量分析。     

The Reaction of Ninhydrin with Trimethylbenzenes under Friedel-Crafts Reaction Conditions

The reaction of ninhydrin with 1,2,3- and 1,2,4-trimethylbenzene in the presence of H₂SO₄ or AlCl₃ afforded 2-monoaryl and 2,2-diaryl-1,3-indanedione derivatives as the major products. With 1,3,5-trimethylbenzene as the arene nucleophile, either a reduction product or an indenoindanone derivative was obtained depending upon the catalyst employed in the reaction.     

A New Synthetic Approach to Elvucitabine

A new synthetic approach to elvucitabine started from L-xylose via the reactions of 10 steps in an overall yield of 20% was developed. The key steps included trimethylsilyl trifluoromethanesulfonate(TMSOTf)-mediated stereocontrolled β-glycosidation and exquisite choice of chloroacetyl group for the protection of hydroxyl groups as well as the corresponding deprotection under notably mild conditions. The structure of elvucitabine, in particular, the stereochemistry thereof, was unambiguously determined by comparison of the physical properties, such as ¹H NMR data and the specific rotation, of the synthesized sample with those reported.     

反相悬浮聚合法制备球状卡波树脂的研究

以偶氮二异丁脒盐酸盐(V50)作为引发剂,失水山梨醇硬脂酸酯(Span60)和聚二甲基硅氧烷PEG-7磷酸酯为复合分散剂,蔗糖烯丙基醚和三甲基丙基聚氧乙烯(15)醚三丙烯酸酯为复合交联剂,丙烯酸为单体,正已烷为反应介质,采用反相悬浮聚合方法制备了球状卡波树脂.用光学显微镜和扫描电镜分别对聚合反应的成粒过程和产物的形貌进行了研究.结果表明,聚合体系呈现典型的悬浮聚合相态特征,并获得了堆积密度较高(0.65 g/cm3)的球状卡波树脂.聚合反应动力学研究结果表明,该反相悬浮聚合的聚合速率对单体浓度和引发剂浓度的反应级数分别约为1.36和0.70;聚合反应的表观活化能为78.0 kJ/mol.交联剂对卡波树脂的性能有重要的影响,通过适度交联可提高产物的增稠效率及其抗剪切性能.     

Correlating DFT-Calculated Energy Barriers to Experiments in Nonheme Octahedral Fe(IV) O Species

The experimentally measured bimolecular reaction rate constant, k(2) , should in principle correlate with the theoretically calculated rate-limiting free energy barrier, ΔG(≠) , through the Eyring equation, but it fails quite often to do so due to the inability of current computational methods to account in a precise manner for all the factors contributing to ΔG(≠) . This is further aggravated by the exponential sensitivity of the Eyring equation to these factors. We have taken herein a pragmatic approach for C?H activation reactions of 1,4-cyclohexadiene with a variety of octahedral nonheme Fe(IV) O complexes. The approach consists of empirically determining two constants that would aid in predicting experimental k(2) values uniformly from theoretically calculated electronic energy (ΔE(≠) ) values. Shown in this study is the predictive power as well as insights into energy relationships in Fe(IV) O C?H activation reactions. We also find that the difference between ΔG(≠) and ΔE(≠) converges at slow reactions, in a manner suggestive of changes in the importance of the triplet spin state weight in the overall reaction.     

有机相变材料的发展及在纺织领域的应用

相变材料因为其优良的热性能,被广泛应用于纺织品、航空航天、交通运输、农业、国防、建材、太阳能系统和医疗设备等领域。近年来,开发应用新型相变材料已经成为研究热点。本文首先概括介绍了相变材料发展进程,着重介绍了有机相变材料,包括它的分类、性能和应用。详细介绍了有机相变材料在纺织行业的应用,以及对调温纺织品测试手段的研究和建立的相关数学模型的建立。     

The structural phase transitions of aminoguanidinium(1+) dihydrogen phosphate—study of crystal structures, vibrational spectra and thermal behavior

Aminoguanidinium(1+) dihydrogen phosphate was prepared by crystallization from aqueous solution. On the basis of the results of DSC measurements, X-ray structural analysis was carried out at temperatures of 160, 215 and 293 K for three aminoguanidinium(1+) dihydrogen phosphate phases ( |Z=2|non-ferroic |melting point 408 K; II |201-222 K|(2) |Z=2|non-ferroic|-; III |<201 K|(2)|Z=4|non-ferroic|-). The triclinic unit cell dimensions (a=6.8220(2), b=7.1000(2), c=7.4500(2) Å, α=86.925(2)°, β=80.731(2)°, γ=79.630(2)°, V=350.21(2) Å³—phase I) are similar for all three structural phases with the exception of phase III, where doubling of the c-axis length leads to an increase in the volume to 692.34(3) Å³. The crystal structure of all three modifications consists of parallel layers of dihydrogen phosphate anions that are interconnected by aminoguanidinium(1+) cations through hydrogen bonds of the N-H…O type. The planar aminoguanidinium(1+) cations are oriented almost parallel to each other and are perpendicular to the anion layers. The primary differences amongst phases I, II and III lie in the location of the H atom in the short O-H…O bonds connecting the dihydrogen phosphate anions in layers. The FTIR and FT Raman spectra of natural and deuterated compounds were recorded and interpreted. The FTIR spectra were studied down to a temperature of 90 K.     

The banded spherulites of iPP induced by pressure vibration injection molding

Isotactic polypropylene(i PP) samples obtained by pressure vibration injection molding(PVIM) and conventional injection molding(CIM) were studied by polarized-light microscopy(PLM), respectively. It was found that the alternating bright and dark banded spherulites were generated in the transitional region of PVIM parts. It is the first time that the banded spherulites of isotactic polypropylene were observed in polymer processing. What's more, the banded spherulites were proved to be constituted of ?-form crystal by hot stage polarized-light microscopy(HT-PLM) and wide angle X-ray diffraction(WAXD). Morphology of the banded spherulites was also studied by scaning electronical microscopy(SEM).     

Reactivity of iron(II) 5,10,15,20-tetraaryl-21-oxaporphyrin with arylmagnesium bromide: formation of paramagnetic six-coordinate complexes with two axial aryl groups

Coordination of sigma-aryl carbanions by chloroiron(II) 5,20-ditolyl-10,15-diphenyl-21-oxaporphyrin (ODTDPP)Fe(II)Cl has been followed by (1)H NMR spectroscopy. Addition of pentafluorophenyl Grignard reagent (C(6)F(5))MgBr to the toluene solution of (ODTDPP)Fe(II)Cl in the absence of dioxygen at 205 K resulted in the formation of the high-spin (ODTDPP)Fe(II)(C(6)F(5)). The titration of (ODTDPP)Fe(II)Cl with a solution of (C(6)H(5))MgBr carried at 205 K yields a rare six-coordinate species which binds two sigma-aryl ligands [(ODTDPP)Fe(II)(C(6)H(5))(2)](-). Warming of the [(ODTDPP)Fe(II)(C(6)H(5))(2)](-) solution above 270 K results in the decomposition to mono-sigma-phenyliron species (ODTDPP)Fe(II)(C(6)H(5)). Controlled oxidation of [(ODTDPP)Fe(II)(C(6)H(5))(2)](-) with Br(2) affords (ODTDPP)Fe(III)(C(6)H(5))Br, which demonstrates a typical (1)H NMR pattern of low-spin sigma-aryl iron(III) porphyrin. The considered oxidation mechanism involves the (ODTDPP)Fe(III)(C(6)H(5))(2) species, which is readily reduced to the iron(I) 21-oxaporphyrin, followed by oxidation with Br(2) and replacement of one bromide anion by aryl substituent. The (1)H NMR spectra of paramagnetic iron complexes have been examined in detail. Functional group assignments have been made with the use of selective deuteration. The peculiar (1)H NMR spectral features of [(ODTDPP)Fe(II)(p-CH(3)C(6)H(4))(2)](-) (sigma-p-tolyl: ortho, 30.8; meta, 53.6; para-CH(3), 42.1; furan: -16.0; beta-H pyrrole: -27.5, -34.3, -41.8 ppm, at 205 K) are without a parallel to any iron(II) porphyrin or heteroporphyrin and indicate a profound alteration of the electronic structure of iron(II) porphyrin upon the coordination of two sigma-aryls.     

Study on deactivation and regeneration of Pd/Al2O3 catalyst in hydrogen peroxide production by the anthraquinone process

Deactivated palladium catalysts in the hydrogenation of anthraquinione were regenerated with ethanol, nitric acid, hydrogen peroxide, boiling water and steam, respectively. The deactivated and regenerated catalysts were characterized by XPS, ICP, TG, FTIR, TPD, XRD, etc., and studied in the hydrogenation of anthraquinone. The results showed that the main cause of catalyst deactivation is the coverage of the active component by deposits. The treatments by hydrogen peroxide and boiling water can effectively regenerate the deactivated catalysts. This revised version was published online in August 2006 with corrections to the Cover Date.