A highly enantioselective hetero-Diels-Alder reaction of aldehydes with Danishefsky's diene catalyzed by chiral titanium(IV) 5,5',6,6',7,7',8,8'-octahydro-1,1'-bi-2-naphthol complexes

The catalytic effect of chiral Lewis acids on the hetero-Diels-Alder reaction between aldehydes and Danishefsky's diene (1) has been investigated. A variety of combinations of different ligands and Lewis acids have been examined as catalysts for the hetero-Diels-Alder reaction between benzaldehyde and 1, and it has been found that the readily accessible Ti(IV)-H(8)-BINOL (TiHBOL) complex is a very effective catalyst for the reaction, leading to products with very high enantioselectivity (up to 99% ee) and yield (92%). The hetero-Diels-Alder reaction of other aldehydes with 1 under the catalysis of TiHBOL is a general reaction which proceeds well with very high enantioselectivity and isolated yield for various aldehydes at 0 degrees C to room temperature. Based on the experimental results, the proposed mechanism of the hetero-Diels-Alder reaction and the dihedral angle effects of ligands are discussed.     

Importance of van der Waals Interactions in QM/MM Simulations

The importance of accurately treating van der Waals interactions between the quantum mechanical (QM) and molecular mechanical (MM) atoms in hybrid QM/MM simulations has been investigated systematically. First, a set of van der Waals (vdW) parameters was optimized for an approximate density functional method, the self-consistent charge-tight binding density functional (SCC-DFTB) approach, based on small hydrogen-bonding clusters. The sensitivity of condensed phase observables to the SCC-DFTB vdW parameters was then quantitatively investigated by SCC-DFTB/MM simulations of several model systems using the optimized set and two sets of extreme vdW parameters selected from the CHARMM22 forcefield. The model systems include a model FAD molecule in solution and a solvated enediolate, and the properties studied include the radial distribution functions of water molecules around the solute (model FAD and enediolate), the reduction potential of the model FAD and the potential of mean force for an intramolecular proton transfer in the enediolate. Although there are noticeable differences between parameter sets for gas-phase clusters and solvent structures around the solute, thermodynamic quantities in the condensed phase (e.g., reduction potential and potential of mean force) were found to be less sensitive to the numerical values of vdW parameters. The differences between SCC-DFTB/MM results with the three vdW parameter sets for SCC-DFTB atoms were explained in terms of the effects of the parameter set on solvation. The current study has made it clear that efforts in improving the reliability of QM/MM methods for energetical properties in the condensed phase should focus on components other than van der Waals interactions between QM and MM atoms.     

Synthesis, structure, and fluorescence of the novel cadmium(II)-trimesate coordination polymers with different coordination architectures

Three novel complexes, Cd3tma2*13H2O (1), Cd3tma2*dabco*2H2O (2), and Cd3Htma3*8H2O (3) (tma = trimesate), of cadmium(II)-trimesate coordination polymers are obtained from hydrothermal reaction. 1 (C18H32O25Cd3) crystallizes in the monoclinic C2/c space group [a = 18.985(2) A, b = 7.3872(6) A, c = 20.432(2) A, = 97.1660(10), and Z = 4]. 2 (C24H22N2O14Cd3) crystallizes in the monoclinic P2(1)/c space group [a = 10.1323(2) A, b = 19.5669(5) A, c = 13.15880(10) A, = 108.9810(10), and Z = 4]. 3 (C27H28O26Cd3) belongs to the trigonal P31c space group [a = 15.7547(3) A, b = 15.7547(3) A, c = 7.93160(10) A, and Z = 2]. The Cd(II) centers in the three complexes are bridged by tma ligands in the coordination fashion of unidentate, bridging unidentate, bidentate, chelating bis-bidentate, chelating/bridging bis-bidentate, or chelating/bridging bidentate to form the T-shaped molecular bilayer motif for 1, chicken-wire-like motif for 2, and honeycomb-like porous structure for 3, respectively, in which the T-shaped molecular bilayer motif and chicken-wire-like motif are further interlinked in interdigitating or alternating fashion to construct the different coordination architectures. These three complexes exhibit strong fluorescent emission bands at 355 nm (lambda(ex) = 220 nm) for 1, 437 nm (lambda(ex) = 365 nm) for 2, and 353 nm (lambda(ex) = 218 nm) for 3 in the solid state at room temperature.     

Preparation of multihollow P(St-MAA) particles by sequence soap-free/soap emulsion polymerization and followed by stepwise alkali/acid posttreatment

The effects of ionic emulsifier, sodium dodecylbenzene sulfate (SDBS), on the formation of the multihollow structures in sub-micron sized polymer particles produced by alkali/acid posttreatment were investigated. The original latex particles with narrow size distribution were synthesized by a new sequence emulsifier-free/emulsifier emulsion copolymerization of styrene (St) and methacrylic acid (MAA). Results indicated that the pore size decreased and the pore number increased with the increase of SDBS amount, and the morphology of the posttreated latex particles was also significantly influenced by the introducing time of SDBS in the preparation of the original latex particles, and a suitable introducing time was 3 h of polymerization.     

Synthesis of 2‐Dihydrooxadiazolinyl Chromones

Reactions of the substituted 2‐formyl chromones with aroylhydrazines gave corresponding 2‐(aroylhydrazonomethylidyne) chromones. Then 2‐(3′‐acetyl‐5′‐aryl‐2′,3′‐dihydro‐1′,3′,4′‐oxadiazol‐2′‐yl) chromones were prepared by these 2‐(aroylhydrazonomethylidyne) chromones under refluxing with Ac₂O. All target compounds were characterized through elemental analysis and IR, ¹H NMR, MS.     

Development and certification of a coal fly ash certified reference material for selected polycyclic aromatic hydrocarbons

The development and certification of a coal fly ash certified reference material (CRM) for polycyclic aromatic hydrocarbons (PAH) is described; this is the first natural matrix CRM for organic environmental analysis in China. The homogeneity and stability of this material have been tested by HPLC. The concentrations of several PAH were determined by use of two independent, different methods--solvent extraction-HPLC analysis with UV detection coupled with fluorescence detection (FLD) and solvent extraction, isolation with a silica column, and GC analysis with flame ionization detection (FID). Five certified values were determined: phenanthrene 7.1 +/- 2.6 microg g(-1), anthracene 2.0 +/- 0.8 microg g(-1), fluoranthene 7.4 +/- 1.9 microg g(-1), pyrene 7 +/- 2 microg g(-1), and benzo[a]pyrene 1.3 +/- 0.3 microg g(-1). Reference values for several other PAH are also suggested.     

pKa calculations in solution and proteins with QM/MM free energy perturbation simulations: a quantitative test of QM/MM protocols

The accuracy of biological simulations depends, in large part, on the treatment of electrostatics. Due to the availability of accurate experimental values, calculation of pKa provides stringent evaluation of computational methods. The generalized solvent boundary potential (GSBP) and Ewald summation electrostatic treatments were recently implemented for combined quantum mechanical and molecular mechanics (QM/MM) simulations by our group. These approaches were tested by calculating pKa shifts due to differences in electronic structure and electrostatic environment; the shifts were determined for a series of small molecules in solution, using various electrostatic treatments, and two residues (His 31, Lys 102) in the M102K T4-lysozyme mutant with large pKa shifts, using the GSBP approach. The calculations utilized a free energy perturbation scheme with the QM/MM potential function involving the self-consistent charge density functional tight binding (SCC-DFTB) and CHARMM as the QM and MM methods, respectively. The study of small molecules demonstrated that inconsistent electrostatic models produced results that were difficult to correct in a robust manner; by contrast, extended electrostatics, GSBP, and Ewald simulations produced consistent results once a bulk solvation contribution was carefully chosen. In addition to the electrostatic treatment, the pKa shifts were also sensitive to the level of the QM method and the scheme of treating QM/MM Coulombic interactions; however, simple perturbative corrections based on SCC-DFTB/CHARMM trajectories and higher level single point energy calculations were found to give satisfactory results. Combining all factors gave a root-mean-square difference of 0.7 pKa units for the relative pKa values of the small molecules compared to experiment. For the residues in the lysozyme, an accurate pKa shift was obtained for His 31 with multiple nanosecond simulations. For Lys 102, however, the pKa shift was estimated to be too large, even after more than 10 nanosecond simulations for each lambda window; the difficulty was due to the significant, but slow, reorganization of the protein and water structure when Lys 102 was protonated. The simulations support that Lys 102 is deprotonated in the X-ray structure and the protein is highly destabilized when this residue is protonated.     

Binding sites of nitrogenase: kinetic and theoretical studies of cyanide binding to extracted FeMo-cofactor derivatives

The first kinetic study of a substrate (CN(-)) binding to the isolated active site (extracted FeMo-cofactor) of nitrogenase is described. The kinetics of the reactions between CN(-) and various derivatives of extracted FeMo-cofactor [FeMoco-L; where L is bound to Mo, and is NMF, Bu(t)NC, or imidazole (ImH)] have been followed using a stopped-flow, sequential-mix method in which the course of the reaction is followed indirectly, by monitoring the change in the rate of the reaction of the cofactor with PhS(-). The kinetic results, together with DFT calculations, indicate that the initial site of CN(-) binding to FeMoco-L is controlled by a combination of the electron-richness of the cluster core and lability of the Mo-L bond. Ultimately, the reactions between FeMoco-L and CN(-) involve displacement of L and binding of CN(-) to Mo. These reactions occur with a variety of rates and rate laws dependent on the nature of L. For FeMoco-NMF, the reaction with CN(-) is complete within the dead-time of the apparatus (ca. 4 ms), while with FeMoco-CNBu(t) the reaction is much slower and exhibits first order dependences on the concentrations of both FeMoco-CNBu(t) and CN(-) (k = 2.5 +/- 0.5 x 10(4) dm(3) mol(-1) s(-1)). The reaction of FeMoco-ImH with CN(-) occurs at a rate which exhibits a first order dependence on FeMoco-ImH but is independent of the concentration of CN(-) (k = 50 +/- 10 s(-1)). The results are interpreted in terms of CN(-) binding directly to the Mo site for FeMoco-NMF and FeMoco-ImH, but with FeMoco-CNBu(t) initial binding at an Fe site is followed by movement of CN(-) to Mo. Complementary DFT calculations are consistent with this interpretation, indicating that, in FeMoco-L, the Mo-L bond is stronger for L = ImH than for L = CNBu(t) and the binding of CN(-) to Mo is stronger than to any Fe atom in the cofactor.     

An indium(III)–water chain based on an unusual acyclic water pentamer

An in situ reaction under hydro­thermal conditions leads to the formation of the title compound, diaqua­(pyridine‐2‐carboxyl­ato)­(pyridine‐2,6‐dicarboxyl­ato)indium(II) trihydrate, [In(C₆H₄NO₂)(C₇H₃NO₄)(H₂O)₂]·3H₂O, in which the central In^III atom is seven‐coordinated by one pyridine‐2,6‐di­carboxyl­ate ligand, one pyridine‐2‐carboxyl­ate ligand and two water mol­ecules in a penta­gonal–bipyramidal coordination environment. An indium(III)–water chain based on an unusual water pentamer is observed.     

LC-ESI-MS Determination of Bilobalide and Ginkgolides in Canine Plasma

A sensitive and selective method using liquid chromatography with electrospray ionization mass spectrometric detection was developed for the quantification of bilobalide and ginkgolides in canine plasma. The analytes were extracted with diethyl ether-dichloromethane-isopropanol (6:3:1, v/v) after spiking the samples with daidzein (internal standard). The lower limit of quantification (LLOQ) of the method was 2.5 μg L⁻¹ for ginkgolide B and 10.0 μg L⁻¹ for bilabolide, ginkgolide A and ginkgolide C. The accuracy of the method was within 15% of the actual values over a wide range of plasma concentrations. The intra-day and inter-day precision was better than 15% (R.S.D.). Finally, the LC-ESI-MS method was successfully applied to study the pharmacokinetics of ginkgolides and bilabolide after administration of Ginkgo biloba extracts to dogs.