Interpenetrating polymer network (IPN) nanogels based on gelatin and poly(acrylic acid) by inverse miniemulsion technique: synthesis and characterization

Novel interpenetrating polymer network (IPN) nanogels composed of poly(acrylic acid) and gelatin were synthesised by one pot inverse miniemulsion (IME) technique. This is based on the concept of nanoreactor and cross-checked from template polymerization technique. Acrylic acid (AA) monomer stabilized around the gelatin macromolecules in each droplet was polymerized using ammonium persulfate (APS) and tetramethyl ethylene diamine (TEMED) in 1:5 molar ratio and cross-linked with N,N-methylene bisacrylamide (BIS) to form semi-IPN (sIPN) nanogels, which were sequentially cross-linked using glutaraldehyde (Glu) to form IPNs. Span 20, an FDA approved surfactant was employed for the formation of homopolymer, sIPN and IPN nanogels. Formation of stable gelatin-AA droplets were observed at 2% surfactant concentration. Dynamic light scattering (DLS) and scanning electron microscopy (SEM) studies of purified nanogels showed small, spherical IPN nanogels with an average diameter of 255 nm. In contrast, sIPN prepared using the same method gave nanogels of larger size. Fourier-transform infrared (FT-IR) spectroscopy, SEM, DLS, X-ray photoelectron spectroscopy (XPS) and zeta potential studies confirm the interpenetration of the two networks. Leaching of free PAA chains in sIPN upon dialysis against distilled water leads to porous nanogels. The non-uniform surface of IPN nanogels seen in transmission electron microscopy (TEM) images suggests the phase separation of two polymer networks. An increase of N/C ratio from 0.07 to 0.17 (from PAA gel to IPN) and O/C ratio from 0.22 to 0.37 (from gelatin gel to IPN) of the nanogels by XPS measurements showed that both polymer components at the nanogel surface are interpenetrated. These nanogels have tailoring properties in order to use them as high potential drug delivery vehicles for cancer targeting.     

Dynamic Active Noise Control of Broadband Noise in Fighter Aircraft Pilot Helmet

This paper presents the development of a dynamic Active Noise Control (ANC) algorithm aimed towards reducing the broadband noise inside the helmet earcups of a fighter aircraft pilot helmet. The dynamic ANC involves a Variable Step-Size Griffiths (VSSG) FxLMS algorithm to attenuate noise entering directly through helmet, a LMS based adaptive noise canceller to attenuate noise entering through the pilot microphone, and energy detectors for failure protection and optimized battery power usage. The algorithms are implemented on Texas Instruments’ TMS320C6748 processor and are tested in a helmet ANC experimental setup.     

Impact of zinc substitution on the structural and magnetic properties of chemically derived nanosized manganese zinc mixed ferrites

Mn_1−xZn_xFe₂O₄ nanoparticles (x=0-1) were synthesized by wet chemical co-precipitation techniques. X-ray diffraction, transmission electron microscopy and high-resolution transmission electron microscopy were effectively utilized to investigate the different structural parameters. The elemental analysis was conducted using energy-dispersive spectrum and inductively coupled plasma analysis. The magnetic properties such as magnetization and coercivity were measured using vibrating sample magnetometer. The observed magnetization values of the nanoparticles were found to be lower compared to the bulk counterpart. The magnetization showed a gradual decrease with zinc substitution except for a small increase from x=0.2 to 0.3. The Curie temperature was found to be enhanced in the case of ferrites in the nanoregime. The variation in lattice constant, reduced magnetization values, variation of magnetization with zinc substitution, the presence of a net magnetic moment for the zinc ferrite and the enhancement in Curie temperature in Mn_1−xZn_xFe₂O₄ all provide evidence to the existence of a metastable cation distribution together with possible surface effects at the nanoregime.     

A Robust Thermal Modulator for Comprehensive Two-Dimensional Gas Chromatography

In comprehensive two-dimensional gas chromatography (GC×GC), two capillary columns are connected in series through an interface known as a “thermal modulator”. This device transforms effluent from the first capillary column into a series of sharp injection-like chemical pulses suitable for high-speed chromatography on the second column. Dramatic increases in the resolving power, sensitivity, and speed of the gas chromatograph result. This paper describes the development of a robust and reliable thermal modulator for GC×GC.     

Dimeric compounds containing malonic acid as the central linking unit: synthesis and mesomorphic properties

Eight new dimeric compounds containing malonic acid as the central linking unit (series M- n - X ) have been synthesized and their mesomorphic properties studied. All these compounds are found to be liquid crystalline, forming mainly nematic and smectic phases. We have carried out microscopic textural observations, X-ray diffractometry as well as solid state NMR studies on these compounds.     

Porphyrins bearing mono or tripodal benzylphosphonic acid tethers for attachment to oxide surfaces

The ability to attach redox-active molecules to oxide surfaces in controlled architectures (distance, orientation, packing density) is essential for the design of a variety of molecular-based information storage devices. We describe the synthesis of a series of redox-active molecules wherein each molecule bears a benzylphosphonic acid tether. The redox-active molecules include zinc porphyrins, a cobalt porphyrin, and a ferrocene-zinc porphyrin. An analogous tripodal tether has been prepared that is based on a tris[4-(dihydroxyphosphorylmethyl)phenyl]-derivatized methane. A zinc porphyrin is linked to the methane vertex by a 1,4-phenylene unit. The tripodal systems are designed to improve monolayer stability and ensure vertical orientation of the redox-active porphyrin on the electroactive surface. For comparison purposes, a zinc porphyrin bearing a hexylphosphonic acid tether also has been prepared. The synthetic approaches for introduction of the phosphonic acid group include derivatization of a bromoalkyl porphyrin or use of a dimethyl or diethyl phosphonate substituted precursor in a porphyrin-forming reaction. The latter approach makes use of dipyrromethane building blocks bearing mono or tripodal dialkyl phosphonate groups. The zinc porphyrin-tripodal compound bearing benzylphosphonic acid legs tethered to a SiO(2) surface (grown on doped Si) was electrically well-behaved and exhibited characteristic porphyrin oxidation/reduction waves. Collectively, a variety of porphyrinic molecules can now be prepared with tethers of different length, composition, and structure (mono or tripodal) for studies of molecular-based information storage on oxide surfaces.     

An efficient chemoenzymatic approach to (S)-gamma-fluoroleucine ethyl ester

[reaction: see text] An asymmetric synthesis of (S)-gamma-fluoroleucine ethyl ester 1 is described. The key transformation involves a lipase-catalyzed dynamic ring-opening of 2-(3-butenyl)azlactone 7b with EtOH to give amide ester (S)-6b in 84% enantiomeric excess. Removal of the N-pentenoyl group with N,N'-dibromodimethylhydantoin in the presence of trifluoroacetic acid afforded the titled compound, which was isolated as its hydrogen sulfate salt in 75% yield and >97% ee.     

Synthesis of porphyrins bearing hydrocarbon tethers and facile covalent attachment to si(100)

The use of redox-active molecules as the active storage elements in memory chips requires the ability to attach the molecules to an electroactive surface in a reliable and robust manner. To explore the use of porphyrins tethered to silicon via carbosilane linkages, 17 porphyrins have been synthesized. Fourteen porphyrins bear a tether at a single meso site, and three porphyrins bear functional groups at two beta sites for possible two-point attachment. Two high-temperature processing methods (400 degrees C under inert atmosphere) have been developed for rapid (minutes), facile covalent attachment to Si platforms. The high-temperature processing conditions afford attachment either by direct deposition of a dilute solution (1 microM-1 mM) of the porphyrin sample onto the Si substrate or sublimation of a neat sample onto the Si substrate. The availability of this diverse collection of porphyrins enables an in-depth examination of the effects of the tether (length, composition, terminal functional group, number of tethers) and steric bulk of nonlinking substituents on the information-storage properties of the porphyrin monolayers obtained upon attachment to silicon. Attachment proceeds readily with a wide variety of hydrocarbon tethers, including 2-(trimethylsilyl)ethynyl, vinyl, allyl, or 3-butenyl directly appended to the porphyrin and iodo, bromomethyl, 2-(trimethylsilyl)ethynyl, ethynyl, vinyl, or allyl appended to the 4-position of a meso-phenyl ring. No attachment occurs with substituents such as phenyl, p-tolyl, mesityl, or ethyl. Collectively, the studies show that the high-temperature attachment procedure (1) has broad scope encompassing diverse functional groups, (2) tolerates a variety of arene substituents, and (3) does not afford indiscriminate attachment. The high-temperature processing conditions are ideally suited for use in fabrication of hybrid molecular/semiconductor circuitry.     

Thermotropic uniaxial and biaxial nematic and smectic phases in bent-core mesogens

Two azo substituted achiral bent-core mesogens have been synthesized. Optical polarizing microscopy and synchrotron X-ray scattering studies of both compounds reveal the existence of the thermotropic uniaxial and biaxial nematic and three smectic phases at different temperatures in these single component small molecule systems. The transition from the uniaxial to biaxial nematic phase is confirmed to be second order. The transitions from the biaxial nematic to the underlying smectic phase and between the smectic phases have barely discernible heat capacity signatures and thus are also second order.     

Effect of structure on properties of aromatic-aliphatic polybenzimidazoles. II

Polybenzimidazoles (PBI) with p-phenylene and/or cis-vinylene groups in the backbone were prepared from terephthalic acid (T), maleic acid (M), and 3,3′ diamino-benzidine tetrahydrochloride dihydrate (DAB) in poly(phosphoric acid) (PPA). Five polymer samples were prepared by varying the M:T molar ratios in the following order: 1:0, 1:1, 2:1, 1:2, and 1:4. The polymers were characterized by intrinsic viscosity, density, electronic fluorescence, and IR spectra. The effect of composition on the solubility of the polymers in various organic solvents was also investigated. The relative thermal stability of the polymers was evaluated by dynamic thermogravimetry in air and polybenzimidazoles (PBI) with cis-vinylene groups were found to be less stable.