A simple two steps ytterbium triflate‐catalysed preparation of 2,2‐dimethyl‐2h‐chromenes from salicylaldehydes and 2‐methylpropene

The preparation of various 2,2‐dimethyl‐2H‐chromenes was achieved in two steps via an ytterbium triflate‐catalysed reaction between salicylaldehydes, trimethylorthoformate and 2‐methylpropene. From salicylaldehyde, two reaction products were characterised: 4‐methoxy‐2,2‐dimethylchroman and 2‐(1,3‐dimethoxy‐3‐methylbutyl)phenol. The former compound probably results from a Lewis acid‐catalysed [2+4] cycloaddition between the intermediate quinonemethide and 2‐methylpropene whereas the latter may occur via a reaction related to a carbonyl‐ene reaction between the quinonemethide and 2‐methylpropene. Both compounds were subjected to a catalytic acidic treatment leading to 2,2‐dimethyl‐2H‐chromene. Starting from various salicylaldehydes, the scope of this method was investigated.     

Estimation-induced correlations of the Zernike coefficients of the eye aberration

The statistical properties of the estimated eye aberrations differ in general from the actual ones owing to the cross coupling and aliasing generated in the estimation process. In particular, the estimated Zernike aberration coefficients may show fictitious correlations that are not present in the incoming wavefronts. This fact should be taken into account when analyzing estimated aberration datasets, searching for correlations related to physiological eye features. We give an analytical model for this effect and evaluate its magnitude for a particular example, assuming that the true aberration statistics follows a Kolmogorov power law.     

Chromosomal differentiation of populations of Lysapsus limellus limellus, L. l. bolivianus, and of Lysapsus caraya (Hylinae, Hylidae)

Cytogenetic analysis were done on specimens from two populations of Lysapsus limellus limellus, three of L. l. bolivianus and of one of Lysapsus caraya. All animals showed a diploid chromosomal number of 2n=24. The karyotypes of the two L. limellus subspecies were very similar, differing only by the larger amount of telomeric heterochromatin and a small pericentromeric C-band on the short arms of pair 2 in L. l. limellus specimens. The karyotype of L. caraya differed from those of the two L. limellus subspecies in terms of chromosomal morphology, C-banding pattern and location of the main NOR on chromosomes 7 and 6, respectively. The karyotype of the L. l. bolivianus population from Guajará-Mirim/RO differed from those of the other populations of the same subspecies in morphology and heterochromatin pattern of chromosomes 7 and 8. Additional NORs were detected by silver staining and confirmed by FISH in one of the homologues of pairs 1 and 8 in L. l. bolivianus and in pair 7 in L. caraya. These results suggest that a reassessment of the taxonomic status of L. limellus subspecies, especially of the L. l. bolivianus populations, may be necessary.     

Self-acceleration and matter content in bicosmology from Noether symmetries

In bigravity, when taking into account the potential existence of matter fields minimally coupled to the second gravitation sector, the dynamics of our Universe depends on some matter that cannot be observed in a direct way. In this paper, we assume the existence of a Noether symmetry in bigravity cosmologies in order to constrain the dynamics of that matter. By imposing this assumption we obtain cosmological models with interesting phenomenology. In fact, considering that our universe is filled with standard matter and radiation, we show that the existence of a Noether symmetry implies that either the dynamics of the second sector decouples, being the model equivalent to general relativity (GR), or the cosmological evolution of our universe tends to a de Sitter state with the vacuum energy in it given by the conserved quantity associated with the symmetry. The physical consequences of the genuine bigravity models obtained are briefly discussed. We also point out that the first model, which is equivalent to GR, may be favored due to the potential appearance of instabilities in the second model.     

Extraction optimization for antioxidant phenolic compounds in red grape jam using ultrasound with a response surface methodology

Optimization of the extraction methodology for antioxidant phenolic compounds in red grape jam was performed with an ultrasound-assisted system. The antioxidant phenolic compounds were extracted and analyzed by determining the total phenolic content (Folin Ciocalteu), as well as by employing free radical DPPH and the beta-carotene/linoleic acid system. To optimize the parameters of solvent concentration, time and extraction temperature, the experiments were carried out using the central composite rotatable design (CCRD) method. Using response surface methodology (RSM), the best combinations achieved were with 60% ethanol and water for 20 min at 50 °C. The optimized parameters for this method were compared to an extraction method that has been commonly noted in the literature, which used to be the standard method, and the results were expressed in the milligram equivalent of quercetin per gram of jam (mg E.Q/g Jam). With the new method, the antioxidant potential measured by DPPH was 70% higher than that obtained with the standard extraction method, and the antioxidant potential measured using the beta-carotene/linoleic acid system was 65% higher. In addition, a significant decrease in the total analysis time was achieved (from 10 h to 30 min), when compared to the standard method.     

Study of magnetic and structural properties of ferrofluids based on cobalt-zinc ferrite nanoparticles

Ferrofluids are colloidal systems composed of a single domain of magnetic nanoparticles with a mean diameter around 30 nm, dispersed in a liquid carrier. Magnetic Co_(1−x)Zn_xFe₂O₄ (x=0.25, 0.50, 0.75) ferrite nanoparticles were prepared via co-precipitation method from aqueous salt solutions in an alkaline medium. The composition and structure of the samples were characterized through Energy Dispersive X-ray Spectroscopy and X-ray diffraction, respectively. Transmission Electron Microscopy (TEM) studies permitted determining nanoparticle size; grain size of nanoparticle conglomerates was established via Atomic Force Microscopy. The magnetic behavior of ferrofluids was characterized by Vibrating Sample Magnetometer (VSM); and finally, a magnetic force microscope was used to visualize the magnetic domains of Co_(1−x)Zn_xFe₂O₄ nanoparticles. X-ray diffraction patterns of Co_(1−x)Zn_xFe₂O₄ show the presence of the most intense peak corresponding to the (311) crystallographic orientation of the spinel phase of CoFe₂O₄. Fourier Transform Infrared Spectroscopy confirmed the presence of the bonds associated to the spinel structures; particularly for ferrites. The mean size of the crystallite of nanoparticles determined from the full-width at half maximum of the strongest reflection of the (311) peak by using the Scherrer approximation diminished from (9.5±0.3) nm to (5.4±0.2) nm when the Zn concentration increases from 0.21 to 0.75. The size of the Co-Zn ferrite nanoparticles obtained by TEM is in good agreement with the crystallite size calculated from X-ray diffraction patterns, using Scherer's formula. The magnetic properties investigated with the aid of a VSM at room temperature presented super-paramagnetic behavior, determined by the shape of the hysteresis loop. In this study, we established that the coercive field of Co_(1−x)Zn_xFe₂O₄ magnetic nanoparticles, the crystal and nanoparticle sizes determined by X-ray Diffraction and TEM, respectively, decrease with the increase of the Zn at%. Finally, our magnetic nanoparticles are not very hard magnetic materials given that the hysteresis loop is small and for this reason Co_(1−x)Zn_xFe₂O₄ nanoparticles are considered as soft magnetic material.     

Sparse 1D discrete Dirac operators I: Quantum transport

Some dynamical lower bounds for one-dimensional discrete Dirac operators with different classes of sparse potentials are presented, and the particular role of the particle mass is emphasized.     

NMR hand-held moisture sensor.

An open magnet design, hand-held NMR sensor head is presented. Wood moisture content and cement hydration tests demonstrate the potential of the tool for in-situ material assessment. The magnetic field distribution was adjusted by positioning blocks of permanent magnets using millimeter scale 3-dimensional magnetic field modeling. A low Q-factor circuit was used for spin-echo sequences with short echo times.     

Adsorption and preconcentration of 2,4-dichlorophenoxyacetic acid on a chemically modified silica gel surface

The herbicide 2,4-dichlorophenoxyacetic acid (2,4-D), chemically anchored to a silica gel surface, was used to adsorb and preconcentrate the same herbicide from aqueous solutions at room temperature. From a series of adsorption isotherms adjusted to a modified Langmuir equation, the maximum number of moles adsorbed was calculated as 4.67 x 10(-5) mol g(-1), with the highest retention capacity at pH 5. This modified silica gel was used in a column for preconcentrating trace levels of 2,4-D. The preconcentrated herbicide can be directly eluted with methanol with a recovery efficiency higher than 97%. The concentration factor was 8.33.