Direct Red 28 Adsorption on Amosil and <Emphasis Type="Italic">Avena sativa </Emphasis> L.: Mass Transfer and Kinetics Modelling on the Solid/Solution Interface

Adsorption kinetics is a key issue for successful sorbent selection and the proper design of batch and fixed-bed adsorption systems. The aim of the present study was to determine the kinetics, mass transfer and diffusion coefficients and to establish the rate-controlling mechanism/s during Direct Red 28 adsorption on Amosil and Avena sativa L. biomass. Five kinetic models (pseudo-second order, Blanchard, Avrami, Ritchie and power function) and and four mass transfer (external diffusion, film diffusion, particle diffusion, intraparticle diffusion) mathematical models were applied to the experimental data. To confirm the best-fitting model(s), error analyses were conducted. The integrative comparative analyses of the values of the predicted model parameters, coefficients and error functions established that the intraparticle diffusion model best represented the experimental results of the dye sorption on dried A. sativa L. biomass, while for the Direct Red 28/Amosil system, the kinetic behavior is the best described by either the pseudo-second or Blanchard’s model. Boyd’s effective intraparticle diffusion coefficient (D _i ), characterizing the dye sorption on Amosil, is significantly lower than that for the system Direct Red 28/A. sativa L. biomass. The low values of the Bi number (Bi < 0.5) suggests that the mass transfer resistance, for both systems, is concentrated at the fluid/solid phase surface.     

Measurements of the proton elastic-form-factor ratio mu pG p E/G p M at low momentum transfer

High-precision measurements of the proton elastic form-factor ratio, mu pG p E/G p M, have been made at four-momentum transfer, Q2, values between 0.2 and 0.5 GeV2. The new data, while consistent with previous results, clearly show a ratio less than unity and significant differences from the central values of several recent phenomenological fits. By combining the new form-factor ratio data with an existing cross-section measurement, one finds that in this Q2 range the deviation from unity is primarily due to G p E being smaller than expected.     

Non-isothermal gas flow in microchannel with equal wall temperatures

A non-isothermal two-dimensional compressible subsonic slip gas flows is analyzed in this paper. It is pressure-driven steady flow in microchannels with variable cross section (convergent, divergent, and constant height channel). Since the flows correspond to microspaces, the rarefaction effect is taken in account. The obtained gas temperature profiles are non-uniform. (© 2013 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Novel Electrospun Nanofibers Composed of Polyelectrolyte Complexes

A simple method to obtain novel nanofibers composed of polyelectrolyte complexes (PECs) has been proposed. It consists of the electrospinning of a mixed homogeneous solution of polyelectrolyte partners, and the formation of PEC during the electrospinning. This was achieved by careful choice of the composition of the spinning solutions. Chitosan was the polycationic partner, with either a weak polyacid [poly(acrylic acid), PAA] as a counterpart or a strong one [poly(2‐acrylamido‐2‐methylpropanesulfonic acid), PAMPS]. The fibrous mats were composed of nanofibers with mean diameters of ca. 100 nm. They retained their integrity over the pH range which is typical of the corresponding PEC.

     

HPAE-PAD – a sensitive method for the determination of carbohydrates

High performance anion exchange chromatography with pulsed amperometric detection (HPAE-PAD) was used for the determination of eleven monosaccharides. Three analytical columns with different selectivities were tested, and the resulting separations were compared calculating precision and detection limits. The monosaccharides could be separated on CarboPAC PA10 in one analysis run with the lowest detection limits and a high precision. For the determination of polysaccharides and humic bound carbohydrates in natural organic matter, an hydrolysis step had to be carried out. With the exception of fructose, the recoveries varied between 56% and 83%. The described methods were applied for the determination of bound carbohydrates in a bog lake water and a soil extract without preconcentrating the samples.     

Computational study of the aminolysis of 2-benzoxazolinone

Three possible mechanisms (zwitterionic, neutral stepwise, and neutral concerted) of the ring-opening reaction of 2-benzoxazolinone (BO) upon aminolysis with methylamine were studied at the B3LYP/6-31G* level. In the gas phase, the neutral concerted mechanism is shown to be most favorable, which proceeds via a rate-determining barrier of 28-29 kcal/mol. The transition state, CTS, associated with this barrier is a four-centered one, where 1,2-addition of the N[bond]H of methylamine to the C[bond]O of BO ring occurs. The rate-determining barrier of the neutral stepwise pathway is found to be ca. 42 kcal/mol. The inclusion of solvent effects by a polarizable continuum model (PCM) does not change the conclusions based on the gas-phase study; the barrier at CTS is reduced to 20, 20, and 22 kcal/mol in water, ethanol, and acetonitrile, respectively.     

Simultaneous HPLC determination of caffeine, theobromine, and theophylline in food, drinks, and herbal products

A rapid and selective high-performance liquid chromatographic (HPLC) method is developed for the separation and determination of caffeine, theobromine, and theophylline. The chromatography is performed on a Zorbax Eclipse XDB-C8 column (4.6 x 150 mm i.d., 5-microm particle size) at 25 degrees C, with a mobile phase of water-THF (0.1% THF in water, pH 8)-acetonitrile (90:10, v/v). The flow rate is 0.8 mL/min, and detection is by UV at 273 nm. This method permits the simultaneous determination of caffeine, theobromine, and theophylline in food, drinks, and herbal products with detection limits of 0.07-0.2 mg/L and recoveries of 100.20-100.42%. Correlation coefficients, for the calibration curves in the linear range of 0.2-100 mg/L, are greater than 0.9999 for all compounds. The within- and between-day precision is determined for both retention times and peak area. The data suggests that the proposed HPLC method can be used for routine quality control of food, drinks, and herbal products.     

Polyelectrolyte complex nanoparticles from N‐carboxyethylchitosan and polycationic double hydrophilic diblock copolymers

For the first time, the polyelectrolyte complex (PEC) formation tool was used for preparation of core‐shell nanoparticles form the natural polyampholyte N‐carboxyethylchitosan (CECh) and weak polycationic (protonated) polyoxyethylene‐b‐poly[2‐(dimethyl‐amino)ethyl methacrylate] (POE‐b‐PDMAEMA) diblock copolymers. The performed dynamic light scattering analyses revealed that nanoparticles with a PEC core and a POE shell could be formed at mixing ratio between the oppositely charged groups equal to 1/1 depending on CECh molar mass, polymerization degree of PDMAEMA block and ionic strength. The results were confirmed by the performed AFM and cryo‐TEM analyses. When high molar mass CECh was used, core‐shell nanoparticles were obtained with the diblock copolymer of the shortest PDMAEMA block at ionic strength (I) of 0.01. At ionic strength value close to the physiological one (I = 0.1) secondary aggregation occurred. Spherical nanoparticles at I = 0.1 were obtained upon lowering the CECh molar mass. Depending on the polymer partners and medium parameters the size of the obtained particles varied from 60 to 600 nm. The X‐ray photoelectron spectra evidenced the hydrophilic POE‐block shell—coacervate CECh/PDMAEMA‐block core structure. The nanoparticles are stable in a rather narrow pH range around 7.0, thus revealing the high pH‐sensitivity of the obtained core‐shell particles. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2105–2117, 2009     

Synthesis of heterocyclic methylenebisphosphonates by 1,3-dipolar cycloaddition of ethyl diazoacetate to 1,2-benzoxaphosphorin-3-phosphonates

Reaction of salicylaldehydes with tetraethyl ester of methylenebisphosphonic acid, under Knoevenagel reaction conditions, gives the corresponding 1,2-benzoxaphosphorin-3-phosphonates 5 in good yields. The [3+2] regio- and stereoselective cycloaddition of 5a and 5b with ethyl diazoacetate gives two P-4 epimers of the corresponding pyrazoline bisphosphonate tetraethyl esters 9 and 10. Analogously, ethyl diazoacetate reacts with 1 and 2 to give the expected pyrazolines 6-8. The structures of the new compounds are revealed and confirmed by analytical, spectroscopic data and X-ray crystallographic analysis.     

Electrospun non-woven nanofibrous hybrid mats based on chitosan and PLA for wound-dressing applications

Continuous defect-free nanofibers containing chitosan (Ch) or quaternized chitosan (QCh) were successfully prepared by one-step electrospinning of Ch or QCh solutions mixed with poly[(L-lactide)-co-(D,L-lactide)] in common solvent. XPS revealed the surface chemical composition of the bicomponent electrospun mats. Crosslinked Ch- and QCh-containing nanofibers exhibited higher kill rates against bacteria S. aureus and E. coli than the corresponding solvent-cast films. SEM observations showed that hybrid mats were very effective in suppressing the adhesion of pathogenic bacteria S. aureus. The hybrid nanofibers are promising for wound-healing applications.