Delocalization corrections to the strictly localized molecular orbitals: A linearized SCF approximation

An explicit formula is derived for calculating the delocalization corrections (tails) to be added to the strictly localized bond orbitals. It was obtained by solving analytically the SCF problem for the interbond interactions in a linearized approximation. The model calculations at the CNDO/2 level show that this simple approach is sufficient to account for the molecular conformations.     

A comparison of differential pulse and d.c. amperometric detection modes for the liquid chromatographic determination of oxalic acid

Oxalic acid determinations are made using two modes of electrochemical detection, namely, classical d.c. and differential pulse, after separation by ion-pair, ion exchange high performance liquid chromatography. Peak height ratio plots are constructed and compared for uric acid and oxalic acid mixtures using both electrochemical detection modes. The enhanced selectivity realized by use of the differential pulse electrochemical detection mode is demonstrated.     

Vakuumspektrometrische Analyse gepre?ter Stahlsp?ne

Zusammenfassung Die Vakuumspektrometrische Analyse von Stahlspanpreßlingen wird verbessert und ausgedehnt. Es wird das Abfunkverhalten der Preßlinge unter verschiedenen atmosphärischen Bedingungen in der Funkenkammer beschrieben. Der Zusatz von Wasserstoff zum Argon wirkt sich günstig aus, die Reproduzierbarkeit der Abfunkergebnisse ist gut. Unter den angegebenen Bedingungen lassen sich Spanbriketts aus unberuhigten und beruhigten Stählen einwandfrei vakuumspektrometrisch analysieren.Unberuhigte und beruhigte schwefel-bleihaltige Automatenstähle lassen sich ebenfalls analysieren, wenn die Probenvorgeschichte durch starke Warmverformung und Zerspanung, mit anschließender Mischung und Brikettierung der Späne ausgelöscht wird. Neben der Form hat auch die Größe der Mangansulfid-Bleieinschlüsse einen großen Einfluß auf den Zeit-Intensitätsverlauf aller Spektrallinien.

---

Vacuumspectrometric analysis of briquetted steel chips

Improvements on vacuumspectrometric analysis of briquetted steel chips are dealth with. The influence of different atmospheric conditions in the spark chamber on sparking behaviour of briquettes is shown. An addition of hydrogen to the argon gas will give better results, the reproducibility of analysis is very good. A method is given for vacuumspectrometric analysis of briquetted chips, taken from rimming or killed steels.After hot working, milling and briquetting, samples of rimming and killed sulphurized, leaded free-cutting steel can be analysed, too. There is a great influence of the dimension and the shape of the MnS-Pb inclusions on the pre-spark curves.

---

---

Auszug aus der Doktordissertation, Montanistische Hochschule Leoben, 1967.     

Nitrogen atom insertion into Ir-S and C-S bonds initiated by photolysis of iridium(III)-azido-dithiocarbamato complexes

Photolysis of acetonitrile solutions of Cp*Ir(R2dtc)(N3) [Cp* = eta5-C5Me5, R2dtc = S2CNR2; R = Me (1) or Et (1')] at temperatures below 0 degrees C afford five-coordinate complexes Cp*Ir{NSC(NR2)S} (2 or 2'), where a nitrogen atom has been inserted into one of the Ir-S bonds. In solution, complex 2 thermally convert to the azaethene-1,2-dithiolate complex, Cp*Ir[SN=C(NMe2)S] (3), which could be crystallized as the corresponding dimer, {Cp*Ir[mu-SN=C(NMe2)S-kappa3S:S,S']}2 (4). As a result, a nitrogen atom that originated in the azide ligand is transferred into a C-S bond of the dithiocarbamate.     

Ligand-assisted reduction of osmium tetroxide with molecular hydrogen via a [3+2] mechanism

Osmium tetroxide is reduced by molecular hydrogen in the presence of ligands in both polar and nonpolar solvents. In CHCl3 containing pyridine (py) or 1,10-phenanthroline (phen), OsO4 is reduced by H2 to the known Os(VI) dimers L2Os(O)2(mu-O)2Os(O)2L2 (L2 = py2, phen). However, in the absence of ligands in CHCl3 and other nonpolar solvents, OsO4 is unreactive toward H2 over a week at ambient temperatures. In basic aqueous media, H2 reduces OsO4(OH)n(n-) (n = 0, 1, 2) to the isolable Os(VI) complex, OsO2(OH)4(2-), at rates close to that found in py/CHCl3. Depending on the pH, the aqueous reactions are exergonic by deltaG = -20 to -27 kcal mol(-1), based on electrochemical data. The second-order rate constants for the aqueous reactions are larger as the number of coordinated hydroxide ligands increases, k(OsO4) = 1.6(2) x 10(-2) M(-1) s(-1) < k(OsO4(OH)-) = 3.8(4) x 10(-2) M(-1) s(-1) < k(OsO4(OH)2(2-)) = 3.8(4) x 10(-1) M(-1) s(-1). The observation of primary deuterium kinetic isotope effects, k(H2)/k(D2) = 3.1(3) for OsO4 and 3.6(4) for OsO4(OH)-, indicates that the rate-determining step in each case involves H-H bond cleavage. Density functional calculations and thermochemical arguments favor a concerted [3+2] addition of H2 across two oxo groups of OsO4(L)n and argue against H* or H- abstraction from H2 or [2+2] addition of H2 across one Os=O bond. The [3+2] mechanism is analogous to that of alkene addition to OsO4(L)n to form diolates, for which acceleration by added ligands has been extensively documented. The observation that ligands also accelerate H2 addition to OsO4(L)n highlights the analogy between these two reactions.     

The yield of solvent excited states in the radiolysis of cyclohexane solutions

It is confirmed by pulse radiolysis that emitting solvent excited states are produced in the radiolysis of n-hexane, methylcyclohexane and cyclohexane. The emission is quenched by benzene and benzene emission appears. Applying stern - volmer kinetics to emissions from solvent, benzene and toluene in cyclohexane a very high energy transfer rate constant, viz., k = 2.8 × 10¹¹M⁻¹ sec⁻¹ is obtained. The yield of the excited state of cyclohexane is not greater than 0.3, and it is concluded that the major part of the excited states of other aromatics produced in cyclohexane solutions comes from ion neutralisation.     

On-probe pyrolysis desorption electrospray ionization (DESI) mass spectrometry for the analysis of non-volatile pyrolysis products

An on-probe pyrolyzer has been constructed and interfaced with desorption electrospray ionization (DESI) mass spectrometry (MS) for the rapid analysis of non-volatile pyrolysis products. The detection and analysis of non-volatile pyrolysis products of peptides, proteins and the synthetic polymer poly(ethylene glycol) were demonstrated with this instrument. The on-probe pyrolyzer can be operated off-line or on-line with the DESI source and was interfaced with a tandem MS (MS/MS) instrument, which allowed for structure characterization of the non-volatile pyrolytic products. Advantages of this system are its simplicity and speed of analysis since the pyrolysis is performed in situ on the DESI source probe and hence, it avoids extraction steps and/or the use of matrices (e.g., as in MALDI–MS analyses).     

Pharmacokinetics of ICG and HPPH-car for the detection of normal and tumor tissue using fluorescence, near-infrared reflectance imaging: a case study

We present in vivo fluorescent, near-infrared (NIR), reflectance images of indocyanine green (ICG) and carotene-conjugated 2-devinyl-2-(1-hexyloxyethyl) pyropheophorbide (HPPH-car) to discriminate spontaneous canine adenocarcinoma from normal mammary tissue. Following intravenous administration of 1.0 mg kg-1 ICG or 0.3 mg kg-1 HPPH-car into the canine, a 25 mW, 778 nm or 70 mW, 660 nm laser diode beam, expanded by a diverging lens to approximately 4 cm in diameter, illuminated the surface of the mammary tissue. Successfully propagating to the tissue surface, ICG or HPPH-car fluorescence generated from within the tissue was collected by an image-intensified, charge-coupled device camera fitted with an 830 or 710 nm bandpass interference filter. Upon collecting time-dependent fluorescence images at the tissue surface overlying both normal and diseased tissue volumes, and fitting these images to a pharmacokinetic model describing the uptake (wash-in) and release (wash-out) of fluorescent dye, the pharmacokinetics of fluorescent dye was spatially determined. Mapping the fluorescence intensity owing to ICG indicates that the dye acts as a blood pool or blood persistent agent, for the model parameters show no difference in the ICG uptake rates between normal and diseased tissue regions. The wash-out of ICG was delayed for up to 72 h after intravenous injection in tissue volumes associated with disease, because ICG fluorescence was still detected in the diseased tissue 72 h after injection. In contrast, HPPH-car pharmacokinetics illustrated active uptake into diseased tissues, perhaps owing to the overexpression of LDL receptors associated with the malignant cells. HPPH-car fluorescence was not discernable after 24 h. This work illustrates the ability to monitor the pharmacokinetic delivery of NIR fluorescent dyes within tissue volumes as great as 0.5-1 cm from the tissue surface in order to differentiate normal from diseased tissue volumes on the basis of parameters obtained from the pharmacokinetic models.     

Synthesis and Characterization of Methylzinc Tri(tert‐butyl)silylphosphanide as well as Related Sodium and Potassium Phosphanylzincates

The reaction of dimethylzinc and tri(tert‐butyl)silylphosphane in toluene yielded dimeric methylzinc tri(tert‐butyl)silylphosphanide ( 1 ) which crystallized tetrameric. Compound 1 was deprotonated with sodium in DME and the solvent‐separated dimeric ion pair [(dme)₃Na]⁺ [(dme)Na(MeZn)₂(μ‐PSitBu₃)₂]^? ( 2 ) was isolated. The reaction of 1 in THF with two equivalents of potassium and one equivalent of tri(tert‐butyl)silylphosphane gave dimeric [{tBu₃Si(H)P}{(thf)₂K}₂(MeZn)(PSitBu₃)]₂ ( 3 ). Both of these phosphanylzincates contain Zn₂P₂ cycles with Zn‐P bond lengths of approximately 237 pm, whereas in 1 larger Zn‐P bond lengths of 248.5 pm were found due to the larger coordination numbers of the phosphorus and zinc atoms.