Template synthesiS: Geometrical and electronic structures of the Fe nitrosyl complex formed by bis(S-methylisothiosemicarbazone)-2,4-pentandione

Sodium acetylacetonate reacts with S-metliylisothiosemicarbazidium nitrate and Fe(NO₃)₃ · 9H₂O in ethanol to make [Fe(HL)NO]NO₃, in which H₃L is bis(S-methyl-isothiosemicarbazone)-2,4-puntandione. The [Fe(HL)NO]⁺ cation has a square pyramidal structure with the HL^2- arranged around the central ion in the basal plane and the nitrogen atom of the NO group in the apical position, with the iron atom diverging from the plane of the base of the pyramid by 0.477 Å. The FeN0 moiety has a linear structure (FeNO = l72.7°). XRD, IR, and Mössbauer spectroscopy have been combined with calculations on the electronic structure to demonstrate that the Fe-NO bond is covalent.Chemical Institute, Academy of Sciences of Moldavian SSR. Applied Physics Institute, Academy of Sciences of the Moldavian SSR. Kishinev. Institute of Crystallography, Academy of Sciences of the USSR. Kurnakov Institute for General and Inorganic Chemistry, Academy of Sciences of the USSR, Moscow. Translated from Teoreticheskaya i Éksperimental'naya Khimiya, Vol. 27, No, 3, pp. 376–381, May–June, 1991. Original article submitted February 18, 1991.     

An approximate description of the double capture process in He2+ + He collisions with static correlation

It is shown that the process of resonant double electron capture in high energy He²⁺+He collisions can be approximately described by a sum over products of one-electron CDW amplitudes. The summation coefficients are determined by stationary ground-state calculations with CI wavefunctions. Total and differential cross sections are calculated and compared with experimental values.     

Electronic detection of the enzymatic degradation of starch

[reaction: see text] The enzymatic degradation of starch can be monitored electronically using single-walled carbon nanotubes (SWNTs) as semiconducting probes in field-effect transistors (FETs). Incubation of these devices in aqueous buffer solutions of amyloglucosidase (AMG) results in the removal of the starch from both the silicon surfaces and the side walls of the SWNTs in the FETs, as evidenced by direct imaging and electronic measurements.     

Diffusion of reagents in macrobeads

A simple and effective method of measuring diffusion rates of various acylating reagents in macro beads (in this work diameters greater than 570 microm) of amino-functionalized resins is presented. The extent of diffusion at various points of time was determined by treating beads with a staining reagent ("chloranil", 2,3,5,6-tetrachloro-1,4-benzoquinone) that colored the regions of the beads that had not yet been permeated by reagent (the central part of the beads). The volume of unstained resin (permeated part) was compared with the volume of the stained part, and diffusion rate constants were calculated. Factors influencing diffusion such as reagent concentration, solvent, temperature, resin type, and mechanical effects were investigated. The results showed that diffusion was promoted by increased temperature, good swelling of the resin, small reagents, and high concentrations but not by sonication or mechanical agitation.     

SPOCC-194, a new high functional group density PEG-based resin for solid-phase organic synthesis

A novel polymer matrix for solid-phase synthesis, SPOCC(194) resin (1), was designed featuring a backbone of homogeneous tetraethylene glycol (TEG(194)) macromonomer linked by quaternary carbon junctions and terminating in primary alcohol functionality. Beaded SPOCC(194) resin was effectively prepared by suspension polymerization of oxetanylated TEG macromonomer 5 in stirred silicon oil. Mechanically stable and inert to a diverse range of reaction conditions, SPOCC(194) possessed a high hydroxyl group loading (0.9-1.2 mmol/g) for substrate attachment and swelled effectively ( approximately 2-4 mL/g) in a variety of organic and aqueous solvents. Developed for solid-phase synthesis at high reactant concentrations for driving organic and aqueous reactions to completion, SPOCC(194) exhibited high functional group density (mmol/mL) similar to that of low-loaded aminomethylated polystyrene-divinylbenzene copolymer (PS-1%DVB) yet significantly higher than that of PEGA(1900), SPOCC(1500), and TentaGel S. High-resolution MAS NMR spectra of Fmoc-derivatized SPOCC(194) indicate that monitoring of functional group transformation is possible. Moreover, by employment of a nonaromatic resin-linker combination, electrophilic chemistry, such as Lewis acid catalyzed glycosylation and Friedel-Crafts acylation, was selectively performed on substrate bound to SPOCC(194) resin. Such properties make SPOCC(194) resin a promising new polymer matrix for the support-bound construction of small organic molecules by parallel and combinatorial synthesis and the scavenging of solution-phase reactants or byproducts.     

Using the diphosphanyl radical as a potential spin label: effect of motion on the EPR spectrum of an R1(R2)P--PR1 radical

The EPR spectrum of the novel radical Mes*(CH3)P--PMes* (Mes*=2,4,6-(tBu)3C6H2) was measured in the temperature range 100-300 K, and was found to be drastically temperature dependent as a result of the large anisotropy of the 31P hyperfine tensors. Below 180 K, a spectrum of the liquid solution is accurately simulated by calculating the spectral modifications due to slow tumbling of the radical. To achieve this simulation, an algorithm was developed by extending the well-known nitroxide slow-motion simulation technique for the coupling of one electron spin to two nuclear spins. An additional dynamic process responsible for the observed line broadening was found to occur between 180 K and room temperature; this broadening is consistent with an exchange between two conformations. The differences between the isotropic 31P couplings associated with the two conformers are shown to be probably due to an internal rotation about the P--P bond.     

Electrochemical impedance spectroscopic analysis of dye-sensitized solar cells

Electrochemical impedance spectroscopy (EIS) has been performed to investigate electronic and ionic processes in dye-sensitized solar cells (DSC). A theoretical model has been elaborated, to interpret the frequency response of the device. The high-frequency feature is attributed to the charge transfer at the counter electrode while the response in the intermediate-frequency region is associated with the electron transport in the mesoscopic TiO2 film and the back reaction at the TiO2/electrolyte interface. The low-frequency region reflects the diffusion in the electrolyte. Using an appropriate equivalent circuit, the electron transport rate and electron lifetime in the mesoscopic film have been derived, which agree with the values derived from transient photocurrent and photovoltage measurements. The EIS measurements show that DSC performance variations under prolonged thermal aging result mainly from the decrease in the lifetime of the conduction band electron in the TiO2 film.     

One-electron versus electron-electron interaction contributions to the spin-spin coupling mechanism in nuclear magnetic resonance spectroscopy: analysis of basic electronic effects

For the first time, the nuclear magnetic resonance (NMR) spin-spin coupling mechanism is decomposed into one-electron and electron-electron interaction contributions to demonstrate that spin-information transport between different orbitals is not exclusively an electron-exchange phenomenon. This is done using coupled perturbed density-functional theory in conjunction with the recently developed J-OC-PSP [=J-OC-OC-PSP: Decomposition of J into orbital contributions using orbital currents and partial spin polarization)] method. One-orbital contributions comprise Ramsey response and self-exchange effects and the two-orbital contributions describe first-order delocalization and steric exchange. The two-orbital effects can be characterized as external orbital, echo, and spin transport contributions. A relationship of these electronic effects to zeroth-order orbital theory is demonstrated and their sign and magnitude predicted using simple models and graphical representations of first order orbitals. In the case of methane the two NMR spin-spin coupling constants result from totally different Fermi contact coupling mechanisms. (1)J(C,H) is the result of the Ramsey response and the self-exchange of the bond orbital diminished by external first-order delocalization external one-orbital effects whereas (2)J(H,H) spin-spin coupling is almost exclusively mitigated by a two-orbital steric exchange effect. From this analysis, a series of prediction can be made how geometrical deformations, electron lone pairs, and substituent effects lead to a change in the values of (1)J(C,H) and (2)J(H,H), respectively, for hydrocarbons.     

Cation selective ion channels formed by macrodiolide antibiotic elaiophylin in lipid bilayer membranes

The macrodiolide antibiotic elaiophylin (1) forms stable, long-lasting cation selective ion channels in planar lipid bilayer membranes prepared from soybean phosphatidylcholine. Current of the single ion channel displayed two sublevels corresponding to the two substates of the channel conductance: a slow substate, with about 5 s of mean dwell time in the open state at 40% level of the total amplitude conductance, and a fast substate of higher conductance with dwell times in the open and closed state of about 0.1 s. Amplitude conductances of the single ion channels in 200 mM of LiCl, NaCl, KCl, RbCl and CsCl were 75, 140, 220, 240 and 226 pS, and the conductance was linear function of the electrolyte concentration. Ratios of cation to anion permeabilities of the channel for NaCl and KCl were 8+/-2 and >24, respectively. A molecular model of the channel structure is suggested.     

Determination of aliphatic amines in air by membrane enrichment directly coupled to a gas chromatograph

Summary A method is described for the determination of shortchain aliphatic amines in ambient air based on impinger sampling in dilute H₂SO₄, selective enrichment across a PTFE gas membrane and quantification by gas chromatography. The enrichment step is carried out in a flow system directly connected to the chromatograph. The separation is performed on a packed column with nitrogen selective detection. The enrichment per sample volume was in the range 7.3 to 8.2 mL^–1 for C₁–C₆ amines. Detection limits were ca 3–10 nM with enrichment of a 2.9 mL liquid sample. After impinger sampling of 5 m³ air in 10 mL absorption solution, this corresponds, to 0.4–0.8 ng/m³ (ca 0.2–0.5 ppt by volume) in air.