Tolman length of simple droplet: Theoretical study and molecular dynamics simulation

In 1949, Tolman found the relation between the surface tension and Tolman length, which determines the dimensional effect of the surface tension. Tolman length is the difference between the equimolar surface and the surface of tension. In recent years, the magnitude, expression, and sign of the Tolman length remain an open question. An incompressible and homogeneous liquid droplet model is proposed and the approximate expression and sign for Tolman length are derived in this paper. We obtain the relation between Tolman length and the radius of the surface of tension(R_s) and found that they increase with the Rs decreasing. The Tolman length of plane surface tends to zero. Taking argon for example, molecular dynamics simulation is carried out by using the Lennard–Jones(LJ) potential between atoms at a temperature of 90 K. Five simulated systems are used, with numbers of argon atoms being 10140, 10935, 11760, 13500, and 15360, respectively. By methods of theoretical study and molecular dynamics simulation, we find that the calculated value of Tolman length is more than zero, and it decreases as the size is increased among the whole size range. The value of surface tension increases with the radius of the surface of tension increasing, which is consistent with Tolman’s theory. These conclusions are significant for studying the size dependence of the surface tension.     

氮自由基启动的1,n-烯炔环化反应

C-N键广泛存在于药物、天然产物和功能材料中,而氮中心自由基在C-N键的构建中起到关键作用.但是,与广泛使用的碳中心自由基相比,氮中心自由基由于缺乏实用简便的产生方法而尚未得到充分研究.因此,发展高效的氮中心自由基引发反应迫在眉睫.在过去的几年里,得益于可信赖且可控制的自由基化学的兴起,可以通过热分解、氧化剂促进、金属...     

浸渍溶剂对Pt/炭-氧化铝催化氢化2-氧-4-苯基丁酸乙酯的影响

螯合辅助溶剂挥发共组装法制备的炭-氧化铝复合材料为载体,分别使用水、乙醇或二者混合物为氯铂酸的分散介质,浸渍制备炭-氧化铝复合材料负载Pt催化剂.通过XRD,N2物理吸附以及TEM表征可知,乙醇作为浸渍溶剂时,最有利于Pt的分散,而混合溶剂浸渍制备的催化剂Pt颗粒最大.2-氧-4-苯基丁酸乙酯不对称加氢反应结果表明,氯铂酸水溶液浸渍得到的催化剂Pt纳米粒子的粒径有利于获得高的光学选择性,催化剂经辛可尼丁修饰后,以乙酸为反应溶剂,可获得最高84.8%的光学选择性.此外,该催化剂重复利用性能优异,可以重复利用22次,活性没有下降.     

Antibacterial thermoplastic polyurethane electrospun fiber mats prepared by 3-aminopropyltriethoxysilane-assisted adsorption of Ag nanoparticles

Antibacterial thermoplastic polyurethane(TPU) electrospun fiber mats were prepared by adsorption of Ag nanoparticles(Ag NPs) onto TPU/3-aminopropyltriethoxysilane(APS) co-electrospun fiber mats from silver sol. The use of APS can functionalize TPU fibers with amino groups, facilitating the adsorption of Ag NPs. The effects of p H of silver sol and APS content on Ag NP adsorption and antibacterial activity were investigated. Ag NP adsorption was evidenced by TEM, XPS and TGA. Significant Ag NP adsorption occurred at p H = 3-5. The main driving force for Ag NP adsorption is electrostatic interaction between ―NH3~+ of the fibers and ―COO-derived from the ―COOH group capped on the surfaces of Ag NPs. The antibacterial activity of the Ag NP-decorated TPU/APS fiber mats was investigated using both gram-negative Escherichia coli and gram-positive Bacillus subtilis. The antibacterial rate increases with increasing APS content up to 5% where the antibacterial rates against both types of bacteria are over 99.9%.     

气相色谱–质谱法测定食用植物油中23种农药残留

建立了测定食用植物油中23种农药残留的气相色谱–质谱联用方法。采用固相萃取,以乙腈超声提取,经过PSA,C_(18)柱进行净化,用气相色谱–质谱法测定,外标法定量。23种农药在0.01~1.0 mg/L范围内与色谱峰面积线性关系良好,相关系数为0.997 3~0.999 7,方法检出限为5~15μg/kg。测定结果的相对标准偏差为2.25%~9.40%(n=6),加标回收率为78.4%~127.3%,可以满足食用植物油中多种农药残留的同时分析。采用该方法对国内市场常见的食用植物油进行检测分析,所检测的农药残留均在国家标准的限量范围内。     

647W灯泵浦大功率连续Nd:YAG激光器

 报道了一台灯泵浦大功率连续Nd:YAG激光器。对影响大功率固体激光器模块输出功率和光束质量的主要因素进行了理论分析，并提出提高激光器效率的措施：对聚光腔的形状、结构和材料以及冷却方式，泵浦灯的参数和材料，激光晶体的参数和镀膜进行优化设计，采用径向固定的谐振腔镜。该灯泵浦YAG晶体棒总体电光转换效率为4%，光束质量为22mm·mrad，输出功率647W。     

高强度三次谐波转换对光束质量的影响

分别利用光强对比度和功率谱密度作为激光束的振幅调制和位相畸变的定量描述参量,研究了在高功率条件下,三次谐波转换过程对激光光束质量的影响,详细分析了基频光的光束质量与三倍频光光束质量的定量变化关系.     

具有多级孔结构的NH4-β沸石的直接合成及其性能

以非离子表面活性剂壬基酚聚氧乙烯醚(Tx-15)为模板,设计氟化铵作为矿化剂.在近中性条件下直接合成了具有微孔-介孔复合孔道的铵型β沸石.合成样品采用粉末X射线衍射(PXRD),高分辨扫描电子显微镜(SEM),微分热重(DTG)以及氨程序升温脱附(NH3-TPD)等手段进行了表征.结果表明,氟离子及非离子表面活性剂的加入对沸石的孔结构、酸性质均起到了一定的调变作用.该沸石具有发达的呈梯级分布的多级孔结构,孔容高达0.67 cm3·g-1,且具有较强的Bronsted酸和适度分布的Lewis酸,大大改善了反应物和产物分子的扩散和反应性能.在混合C4烃的催化裂解反应中,该沸石与传统方法合成的β沸石相比,其转化率提高了约15%,烯烃(乙烯和丙烯)产率提高了近10%,芳烃(苯和甲苯)产率提高了3%.     

稀土改性L沸石在烃类催化裂化催化剂中的应用

采用离子交换的方法制备了一系列复合稀土（含La及Ce）质量分数不同的稀土改性超稳L沸石（RE-USL）,以RE USL沸石替代质量分数为5%的REUSY作为催化裂化催化剂的活性组分,用标准轻油微反活性试验（MAT）评价了其催化性能,并同单一稀土元素改性USL沸石进行了对比。结果表明,一定量的复合稀土改性USL沸石的催化性能优于单一稀土（La或Ce）改性的USL沸石,在催化裂化催化剂中加入稀土改性USL沸石,可以降低汽油产品的烯烃质量分数;可以提高汽油的辛烷值。当复合稀土在RE USL沸石中的质量分数为0.4%左右时, 与不加稀土改性USL沸石催化剂相比较,催化剂的活性指数MAT提高3.6个单位,烯烃质量分数降低1.57个单位,研究法辛烷值（RON）提高2.08个单位,产品分布更合理。     

二安替比林基-4-羟基苯基甲烷及其与铬(Ⅵ)显色反应的研究

合成了二安替比林基-4-羟基苯基甲烷(DApHM),研究了它与铬(Ⅵ)的显色反应,建立了两个测定铬(Ⅵ)的新体系.在Mn(Ⅱ)和磷酸存在下,DApHM与 Cr(Ⅵ)反应生成橙红色产物,λ_max为435nm.CTMAB和Tween-80对该体系有明显增敏效果,其中CTMAB-DApHM-Cr(Ⅵ)体系ε为1.0 ×10~6;Tween-80-DApHM-Cr(Ⅵ)体系ε为6.9×10~5.Cr(Ⅵ)量在0.1～0.7μg/25mL间符合比尔定律.用于电镀废液和自来水中Cr(Ⅵ)的测定,结果满意.