The structure and the potential energy function of AlSO(C_S,X~2A″)

By using the B3P86/aug-cc-pvtz method,the accurate equilibrium geometry of the AlSO(CS,X2A″) molecule has been calculated and compared with available theoretical values.The obtained results show that the AlSO molecule has a most stable structure with bond lengths of R OAl = 0.1864 nm,R OS = 0.1623 nm,R AlS = 0.2450 nm,together with a dissociation energy of 13.88 eV.The possible electronic states and their reasonable dissociation limits for the ground state of the AlSO molecule were determined based on the principle of atomic and molecular reaction statics.The analytic potential energy function of the AlSO molecule was derived by the many-body expansion theory and the contour lines were constructed for the first time,which show the internal information of the AlSO molecule,including the equilibrium structure and stable point.The analysis demonstrates that the obtained potential energy function of AlSO is reasonable and successful and the present investigations provide important insights for further study on molecular reaction dynamics.     

Instantaneous electron beam emittance measurement system based on the optical transition radiation principle

One kind of instantaneous electron beam emittance measurement system based on the optical transition radiation principle and double imaging optical method has been set up. It is mainly adopted in the test for the intense electron-beam produced by a linear induction accelerator. The system features two characteristics. The first one concerns the system synchronization signal triggered by the following edge of the main output waveform from a Blumlein switch. The synchronous precision of about 1 ns between the electron beam and the image capture time can be reached in this way so that the electron beam emittance at the desired time point can be obtained. The other advantage of the system is the ability to obtain the beam spot and beam divergence in one measurement so that the calculated result is the true beam emittance at that time, which can explain the electron beam condition. It provides to be a powerful beam diagnostic method for a 2.5 kA, 18.5 MeV, 90 ns (FWHM) electron beam pulse produced by Dragon I. The ability of the instantaneous measurement is about 3 ns and it can measure the beam emittance at any time point during one beam pulse. A series of beam emittances have been obtained for Dragon I. The typical beam spot is 9.0 mm (FWHM) in diameter and the corresponding beam divergence is about 10.5 mrad.     

天鹅绒阴极产生的双脉冲强流相对论电子束特性实验研究

在时间分辨的模式下, 实验研究了天鹅绒阴极产生的双脉冲相对论强流电子束的束心运动、束包络和束的发射度. 在实验中, 电子束流强度和电子束心运动用电阻环进行测试, 而电子束和石英玻璃的相互作用产生的契仑科夫辐射用来给出电子束包络和发射度信息. 电子束和石英玻璃作用产生的契仑科夫辐射用1台8幅分幅相机记录. 实验结果表明, 天鹅绒阴极产生的相对论强流双脉冲电子束在束流大小、束心运动轨迹、束包络及束发射度等方面具有较好的一致性.     

感应叠加过程行波分析和模拟

 采用变换矩阵为研究工具对感应叠加过程中行波的传播、透射、反射进行了分析，得到了和集中参数分析一致的稳定解，给出了电压随时间变化的细节。建立了3.5 MeV注入器脉冲功率源和感应叠加结构的电路模型，得到的感应腔压模拟波形和实验波形基本一致，结合行波分析法基本解释了腔压波形和Blumlein线输出波形之间较大差异的成因，阴极叠加电压的模拟也反映了实验中主脉冲后的反射波形。     

无源RC积分器在多脉冲信号测量中的问题分析

由微分测量探头和积分器构成的微分积分测量系统广泛应用于脉冲电压和电流测量。依据无源RC积分器的等效电路,分析了在多脉冲信号测量中,无源RC积分器在实现微分信号的积分还原时,可以引起信号的平顶降和信号基线偏离,给出了平顶降和基线偏离与信号脉冲宽度和积分常数的定量关系,计算了在不同积分器参数和脉冲信号参数时的平顶降和基线偏离结果,并且与PSpice电路模拟结果进行了比较,两种结果一致。按照此定量关系,可以根据脉冲信号特点和测量要求,准确确定积分器参数。     

强流脉冲电子束轰击下回喷靶材速度测量与数值模拟

 叙述了用高速摄影技术研究强流脉冲电子束与钽金属靶相互作用后靶材的回喷现象,得出了靶材回喷的速度。并且采用EGS4程序和Euler流体力学方程组分别模拟了电子束在靶内的能量沉积和束靶相互作用的动力学过程。实验表明,钽金属靶在强流脉冲电子束轰击下,回喷靶材的轴向速度大于2.9 mm/μs,而模拟结果表明理想情况下回喷靶材自由面的轴向速度可达9.7 mm/μs。实验和理论计算为阻挡回喷靶材的快门设计提供了必要的参数。     

“神龙一号”轫致辐射靶设计

利用数值模拟方法,设计了"神龙一号"直线感应加速器的轫致辐射靶的靶材及结构。实验测量了钽叠靶所产生的X光照射量和X光焦斑,得到转换靶正前方1m处的X光照射量在0.103C/kg以上,产生的X光焦斑小于1.5mm,满足"神龙一号"轫致辐射靶的设计要求。     

神龙二号热阴极注入器束流调试

神龙二号注入器是一台感应叠加型强流脉冲电子束源,采用热阴极工作模式,为神龙二号加速器提供间隔可调的三脉冲电子束。该注入器的束流调试采取PIC模拟和实验调试交互验证、互相促进的方式,先是通过束斑测量确定引导线圈磁场的加载范围,然后通过PIC方法逐级梳理阳极段束线各线圈的磁场配置,再通过束斑测量加以确认。通过这种束流调试方法,获得了保持束流脉冲平顶完整通过的三种磁场配置,以适应下游加速段束流传输的不同要求。讨论了影响束流调试效果的因素,认为提升神龙二号注入器性能的关键是进一步改进大面积热阴极发射的均匀性。     

感应叠加过程行波分析和模拟

采用变换矩阵为研究工具对感应叠加过程中行波的传播、透射、反射进行了分析,得到了和集中参数分析一致的稳定解,给出了电压随时间变化的细节。建立了3.5 MeV注入器脉冲功率源和感应叠加结构的电路模型,得到的感应腔压模拟波形和实验波形基本一致,结合行波分析法基本解释了腔压波形和Blumlein线输出波形之间较大差异的成因,阴极叠加电压的模拟也反映了实验中主脉冲后的反射波形。     

电磁干扰下时间分辨测量系统信号外触发技术

在实验的基础上给出了束参数时间分辨测量系统的实验布局和特点,分析高压电磁干扰对直线感应加速器中时间分辨测量系统外触发性能的影响和变化规律;进一步探讨系统高压电磁干扰后的抑制措施。针对电磁空间干扰情况,主要通过采用光纤传输控制信号的措施,能很好地传输窄脉冲,信号延时抖动小于2ns,达到了高速信号的可靠传输要求,采用嵌入式控制器既解决了抗电磁干扰的要求,也满足了束参数时间分辨测量系统的使用要求。