Study on drilling mechanism and optimization of percussion-extruding DTH hammer bit

The authors tested the percussion-extruding Down-the-hole （DTH）hammer bit with five different structures and mainly analyzed the drilling mechanism between conical bit and stepped bit. In addition, aiming at ＂the pile effect＂ in combination with the advantage＇ of stepped bit, we design a new cam spinning bit and test it outdoors. The result shows that using cam spinning bit can solve the problem of ＂the pile effect＂, which can also obtain higher drilling efficiency than using conical bit in high confining pressure strata. It is characterized by novel structure and high drilling speed as well as good guiding, and it is significant for improving efficiency in percussion-extruding drilling technique.     

Extending self-organizing maps for supervised classification of remotely sensed data

An extended self-organizing map for supervised classification is proposed in this paper. Unlike other traditional SOMs, the model has an input layer, a Kohonen layer, and an output layer. The number of neurons in the input layer depends on the dimensionality of input patterns. The number of neurons in the output layer equals the number of the desired classes. The number of neurons in the Kohonen layer may be a few to several thousands, which depends on the complexity of classification problems and the classification precision. Each training sample is expressed by a pair of vectors ： an input vector and a class codebook vector. When a training sample is input into the model, Kohonen＇s competitive learning rule is applied to selecting the winning neuron from the Kohouen layer and the weight coefficients connecting all the neurons in the input layer with both the winning neuron and its neighbors in the Kohonen layer are modified to be closer to the input vector, and those connecting all the neurons around the winning neuron within a certain diameter in the Kohonen layer with all the neurons in the output layer are adjusted to be closer to the class codebook vector. If the number of training sam- ples is sufficiently large and the learning epochs iterate enough times, the model will be able to serve as a supervised classifier. The model has been tentatively applied to the supervised classification of multispectral remotely sensed data. The author compared the performances of the extended SOM and BPN in remotely sensed data classification. The investigation manifests that the extended SOM is feasible for supervised classification.     

Causes of rockfalls in Al-Huwayshah area,Yemen

According to topography of Yemen,most areas and villages are located at obligated crest,toe of mountain and under cliffs.Therefore Al-Huwayshah consisting of Tawilah sandstone group is characterized by steep slope reach to 90° in some areas.This area is affected by strong tectonic movements and faults that occurred during the geological epochs.This effect enhances to find out fractures and joints as well as the rocks become brittle and ready to slide depending on the position of area.And there are some frac...     

Elastic-plastic analysis for pile-anchor supporting system of deep foundation pit

By using numerical analysis methods to simulate the deep excavation, a lot of analyses are established on the basis of two-dimensional plane strain, ignoring the fact that foundation pit possesses three dimensions. For soil constitutive relation, people always take linear and nonlinear model, without considering the plastic behavior of soil. Using plastic-elastic hardening model to simulate constitutive relation of soil characteristics, the authors carried out mechanical analysis for pit excavation and support. The results show that the analysis for the stress state of pile anchor system is an effective way which provides theoretical basis for calculation of soil displacement.     

北京市房价与地价的动态关系——基于结构方程模型的实证分析

城市房价与地价之间的关系错综复杂,不仅受多种因素的交织影响,相互之间也存在动态关系。研究房价与地价关系的传统方法,如Granger因果检验和回归分析等,无法刻画房价与地价之间多维的网络状关系,相比之下,结构方程模型能同时处理多个内生潜变量,且不受观测指标共线性的影响,为刻画地价与房价的交互作用提供了新的工具。从住房与土地市场的供需传导机制出发,推导出房价与地价的结构模型,以北京市为例,运用2003-2013年居住用地价格和2014年在售楼盘价格,与北京市GIS电子地图相匹配,提取商服中心可达性、公共交通可达性、道路可达性、商服繁华度、设施便利性等解释变量,构建地价与房价结构方程模型,分析二者之间的结构关系。     

新疆孔雀河流域人工绿洲近40年土地利用/覆被变化

区域尺度土地利用/覆被变化（LUCC）时空特征及驱动力是研究大尺度变化乃至全球变化演变过程的基础,而干旱区LUCC对区域水文、生态影响尤为显著,是全球变化研究的重点之一。以新疆孔雀河流域上游作为研究区,基于1977-2015年6期Landsat数据,采用多规则人机交互目视解译的方法完成LUCC制图,并利用LUCC模型从数量变化、空间变化、土地利用集约程度变化等多方面分析了近40年来该区域LUCC特点及演变机制。结果表明：（1）研究区仅有耕地和建设用地面积增加,且增幅均在200%以上,其他土地类型面积则均有不同程度的减少;（2）耕地变化呈现出空间集聚现象,而建设用地的扩张则呈现空间连续性;（3）2000年前后自然植被经历小幅退化—恢复过程;（4）受西部大开发、塔里木河生态综合治理工程等多种因素影响,2000-2005年间,空间变化的综合动态度最高（2.76%）;（5）自然因素影响较小,人口增长和政策因素是主要驱动因子。     

L1-L2范数联合约束稀疏脉冲反演的应用

稀疏脉冲反演实际上就是利用反褶积原理, 从带有噪声的地震道中计算出具有稀疏分布特征的反射系数的振幅和时间.稀疏脉冲反演是非线性优化问题, 通常都是把非线性优化问题转化为线性优化问题, 然后用线性优化算法求解.以范数约束为基础, 提出L1-L2范数联合约束求解的方法.该算法采用了目前国际流行的内点算法, 与传统的优化算法相比, 这种算法具有精度高, 速度快的优点.通过研究人工模型和南海某油田实际数据, 表明该算法的计算结果和测井记录吻合好, 提高了地震分辨率, 目的层段分辨率优于8m.利用反射系数剖面预测的储层厚度和开发井吻合很好, 大大地降低了资源量计算的风险和油田开发的不确定性.      

青藏高原新生代两类超钾质岩石的成因——实验岩石学和地球化学约束

青藏高原分布有羌塘—囊谦—滇西和冈底斯两条新生代钾质-超钾质火山岩带。羌塘—囊谦—滇西超钾质岩浆活动的峰值时间为40～30Ma,主体岩石具有Ⅰ型超钾质岩的高MgO和低CaO、Al2O3含量特征;30～24Ma期间羌塘中、西部出现Ⅲ型钾质-超钾质岩浆活动,主体岩石以贫SiO2、高CaO、Al2O3和低MgO/CaO为特征。冈底斯新生代超钾质火山岩也显示I型超钾质岩的高MgO和低CaO、Al2O3含量特征,其形成时间为25～12Ma。综合超钾质岩石的实验资料,可知区内I型超钾质岩的源区以富硅、富钾流(熔)体交代形成的金云母方辉橄榄岩为主;Ⅲ型钾质-超钾质岩浆源区则以斜辉橄榄岩地幔为主。囊谦—滇西Ⅰ型超钾质岩带空间上严格受红河走滑构造带所控制,40～28Ma出现I型超钾质岩浆活动,16Ma转变为OIB型钾质火山岩。岩浆源区从岩石圈地幔向软流圈演变,暗示大型走滑断裂引起的岩石圈地幔减薄和软流圈上涌是导致交代岩石圈地幔金云母分解熔融产生区内I型超钾质岩浆的主控因素。羌塘中部35～34Ma有软流圈来源为主的钠质碱性玄武岩岩浆的喷发,30～24Ma转变为以岩石圈地幔为主要来源的Ⅲ型钾质-超钾质岩浆活动,岩浆源区从软流圈向岩石圈迁移,指示软流圈上涌伴随的富CO2流(熔)体活动是导致古交代岩石圈地幔升温熔融产生Ⅲ型钾质-超钾质岩浆的主控因素,软流圈上涌可能是俯冲板片断离或岩石圈地幔拆沉作用的结果。     

基于MaxEnt模型的薄壳山核桃气候适宜性区划

基于最大熵模型（MaxEnt）和GIS技术,提出一种薄壳山核桃气候适宜性区划方法。利用美国本土274个种植点,结合美国本土和中国云南省1981—2010年气候数据开展薄壳山核桃气候适宜性区划研究。结果表明：7月平均气温、年平均气温、30年极端最低气温、年降水量、3—5月降水量、年日照时数和4—5月日照时数为影响薄壳山核桃气候适宜性的主要气候因子。基于美国本土种植点构建的MaxEnt模型在该区域具有较高精度,但将模型直接外推用于中国云南省可靠性不足。因此,利用模拟区域和训练样本气候因子值域的偏离程度改进气候适宜性指数,并将云南省薄壳山核桃适宜性划分为最适宜、适宜、次适宜和不适宜4个等级。其中,最适宜区和适宜区分布于热量资源丰富、日照相对充足并具备较好冬季低温条件的亚热带地区和热带地区边缘。受云南省复杂地形和气候条件影响,区划结果呈现出破碎化分布。     

基于剖面三维地质建模方法及在本溪地区应用

针对成矿带三维地质建模面临的实际问题,以GOCAD软件作为三维建模工具,阐述了基于剖面的三维地质建模流程与方法.为了充分揭示本溪地区深部地质情况及隐伏铁矿的发育情况,采用基于剖面的三维地质建模方法构建了本溪地区907km2的三维地质模型,获取了本溪地区地下三维地质结构,显示出该地区盖层发育宽缓褶皱,断裂切割作用强烈,基底最大埋深可达4200 m,在变质基底埋深较浅的地区,具有很大的铁矿资源勘探潜力.实际应用情况表明,基于剖面的三维地质建模方法符合地质研究从二维到三维的工作流程和思维习惯,是一种有效的成矿带三维建模方法.