Images of Gradual Millimeter Emission and Multi-Wavelength Observations of the 17 august 1994 Solar Flare

We present a comprehensive analysis of the 17 August 1994 flare, the first flare imaged at millimeter (86 GHz) wavelengths. The temporal evolution of this flare displays a prominent impulsive peak shortly after 01:02 UT, observed in hard X-rays and at microwave frequencies, followed by a gradual decay phase. The gradual phase was also detected at 86 GHz. Soft X-ray images show a compact emitting region (20), which is resolved into two sources: a footpoint and a loop top source. Nonthermal emissions at microwave and hard X-ray wavelengths are analyzed and the accelerated electron spectrum is calculated. This energy spectrum derived from the microwave and hard X-ray observations suggests that these emissions were created by the same electron population. The millimeter emission during the gradual phase is thermal bremsstrahlung originating mostly from the top of the flaring loop. The soft X-rays and the millimeter flux density from the footpoint source are only consistent with the presence of a multi-temperature plasma at the footpoint.     

Local disappearance of bivalves in the Azores during the last glaciation

The Pleistocene (Eemian) outcrops of Lagoinhas and Prainha, located at Santa Maria Island (Azores), were investigated and their fossil mollusc content reported. These studies revealed that the last glaciation affected two groups of molluscs: the ‘warm‐guest’ gastropods with West African or Caribbean affinities (e.g. Conus spp., Cantharus variegatus, Bulla amygdala, Trachypollia nodulosa) and shallow bivalve species mainly associated with sandy habitats (Ensis minor, Lucinella divaricata, and probably Laevicardium crassum). In this paper we focus on this group of bivalves, which has since locally disappeared from the Azores. We relate the local disappearance of these bivalves in the Azores with the lack of sand in the shelf. The specific characteristics of the Santa Maria shelf combined with the sea‐level drop during the Weichselian prevented deposition of the lowstand deposits and permitted erosion of the previous ones, leaving the shelf without a sediment cover. Copyright © 2008 John Wiley & Sons, Ltd.     

Petrographic and geochemical characterization of the granitic rocks of the Araguainha impact crater,Brazil

Petrographic and geochemical data obtained on the Araguainha impact crater (Goiás/Mato Grosso States, Brazil) indicate the existence of several molten products that originated during impact‐induced congruent melting of an alkali‐granite exposed in the inner part of the central uplift of the structure. Although previous studies have described these melts to some extent, there is no detailed discussion on the petrographic and geochemical variability in the granite and its impactogenic derivatives, and therefore, little is known about the geochemical behavior and mobility of trace elements during its fusion in the central part of the Araguainha crater. This paper demonstrates that the preserved granitoid exposed in the core of the structure is a magnesium‐rich granite, similar to postcollisional, A‐type granites, also found in terrains outside the Araguainha crater, in the Brasília orogenic belt. The molten products are texturally distinct and different from the original rock, but have very similar geochemical composition, making it difficult to separate these lithotypes based on concentrations of major and minor elements. This also applies for trace and rare earth elements (REE), thus indicating a high degree of homogenization during impact‐induced congruent melting under high pressure and postshock temperature conditions. Petrographic observations, along with geochemical data, indicate that melting occurs selectively, where some of the elements are transported with the melt. Simultaneously, there is an effective dissolution of the rock (granite), which leads to entrainment of the most resistant solid phases (intact or partially molten minerals) into the melt. Minerals more resistant to melting, such as quartz and oxides, contribute substantially to a chemical balance between the preserved granite and the fusion products generated during the meteoritic impact.     

Yardangs in terrestrial ignimbrites: Synergistic remote and field observations on Earth with applications to Mars

The conditions of formation and the form of yardangs in ignimbrites in the Central Andes of Chile, Bolivia, and Argentina may be the most convincing terrestrial analog to the processes and lithology that produce the extensive yardangs of the Medusae Fossae Formation (MFF) of Mars. Through remote and field study of yardang morphologies in the Central Andes we highlight the role that variable material properties of the host lithology plays in their final form. Here, ignimbrites typically show two main facies: an indurated and jointed facies, and a weakly to poorly indurated, ash- and pumice-rich facies. Both facies are vertically arranged in large (erupted volume >100's of km³) ignimbrites resulting in a resistant capping layer, while smaller (10's of km³) ignimbrites are made predominantly of the weakly indurated facies. The two facies have quite different mechanical properties; the indurated facies behaves as strong rock, fails by block collapse and supports steep/vertical cliffs, while the non-indurated facies is more easily eroded and forms gentle slopes and manifests as more subdued erosional forms. In response to aeolian action, the presence of an upper indurated facies results in large, elongate, high aspect ratio (1:20-1:40) megayardangs that form tall (100 m), thin ridges with steep to vertical walls. These are built on a broad apron of the weakly indurated facies with abundant fallen blocks from the upper indurated facies. These terrestrial megayardangs appear to be analogous to megayardangs with associated block fields seen on Mars. Smaller-volume, weakly indurated ignimbrites are sculpted into smaller, stubbier forms with aspect ratios of 1:5-1:10 and heights rarely exceeding 10 m. Excavation of a windward basal moat suggests an erosional progression like that seen in incipient yardangs on Mars. Excavation rates of 0.007-0.003 cm/year are calculated for the weakly indurated ignimbrites. While a persistent strong unidirectional wind is the dominant parameter controlling yardang formation and orientation, a role for flow separation and vorticity is also suggested by our observations at both yardang types. While the indurated facies is commonly pervasively jointed, jointing is of secondary importance in controlling yardang orientation. Serrated margins, a common feature on Mars, result from oblique intersections of jointing with yardang flanks or scarps of ignimbrite. The processes of yardang formation we describe from ignimbrites from the Central Andes are not necessarily specific to ignimbrites, but do connote that degree and distribution of induration is a major control in yardang formation and this has implications for the lithology of the MFF on Mars.     

Simulation of the Askervein flow. Part 2: Large-eddy simulations

Large-eddy simulations of the neutrally stratified flow over the Askervein Hill were performed, to improve the knowledge of the flow obtained from field measurements and numerical simulations with Reynolds averaged Navier-Stokes (RANS) methods. A Lagrangian dynamic subgrid model was used but, to avoid the underdissipative character near the ground, it was merged with a damped Smagorinsky model. Simulations of a flat boundary-layer flow with this subgrid model showed that the turbulent vertical motions and shear stress were better resolved using grids with a stream to spanwise aspect ratio Δx / Δy = 2 than with an aspect ratio Δx / Δy = 1. Regarding the flow over the Askervein Hill, it was found that large-eddy simulations provide an acceptable solution for the mean-velocity field and better predictions of the turbulent kinetic energy in the upstream side of the hill than the model. However, as with the model, grid convergence was not achieved in the lee side and the size of the zone with reversed flow increased with the grid refinement. Nevertheless, the existence of the intermittent separation predicted with unsteady RANS in part one of this work seems unquestionable, due to the deceleration of the flow. In our opinion, a better modelling of the decelerating boundary layer in the lee side is required to improve the results obtained using equilibrium assumptions and achieve grid convergence.     

A Multiple Training Image Approach for Spatial Modeling of Geologic Domains

Characterization of complex geological features and patterns remains one of the most challenging tasks in geostatistics. Multiple point statistics (MPS) simulation offers an alternative to accomplish this aim by going beyond classical two-point statistics. Reproduction of features in the final realizations is achieved by borrowing high-order spatial statistics from a training image. Most MPS algorithms use one training image at a time chosen by the geomodeler. This paper proposes the use of multiple training images simultaneously for spatial modeling through a scheme of data integration for conditional probabilities known as a linear opinion pool. The training images (TIs) are based on the available information and not on conceptual geological models; one image comes from modeling the categories by a deterministic approach and another comes from the application of conventional sequential indicator simulation. The first is too continuous and the second too random. The mixing of TIs requires weights for each of them. A methodology for calibrating the weights based on the available drillholes is proposed. A measure of multipoint entropy along the drillholes is matched by the combination of the two TIs. The proposed methodology reproduces geologic features from both TIs with the correct amount of continuity and variability. There is no need for a conceptual training image from another modeling technique; the data-driven TIs permit a robust inference of spatial structure from reasonably spaced drillhole data.     

Natural Variability of Shear Strength in a Granite Residual Soil from Porto

The renewal imposed by the Eurocodes regarding the methodologies of safety evaluation requires a statistical analysis of the variability of ground geotechnical parameters. However, the studies published in the reviewed literature do not cover the typical materials from the northeast region of Portugal—residual soils from granite—to which a strong heterogeneity is associated. Hence, a statistical characterization of the natural variability of a granite residual soil from Porto has been made through a significant amount of experimental tests, focusing on its geomechanical properties. In order to provide a database for probabilistic analysis of problems involving this type of soils, an appropriate statistical law has been used to model its variability, which has been quantified by means of coefficients of variation and scales of fluctuation.     

Literature review of accessibility measures and models used in land use and transportation planning in last 5 years

Journal of Geographical Sciences - Since its inception accessibility has undergone various changes in the way it is defined, measured, and modeled. The paper reviews the recent advancements made in...     

Sediment disturbance off the Tagus Estuary, Western Portugal: chronic contamination, sewage outfall operation and runoff events

Sediment disturbance patterns in the coastal area off the Tagus Estuary (Portugal) have been assessed using a set of combined techniques. The potential sources of disturbance in the area include chronic contamination of the fine sediments originating from the estuary, a local input from a long-sea sewage outfall and occasional high runoff episodes following torrential rain. The Sediment Quality Triad approach, combining environmental chemistry (namely organic contaminants), macrofaunal benthic communities and laboratory sediment toxicity assays, was performed on sediment samples from 20 sites. The samples were collected before the outfall commenced operation and four years after commissioning, in order to evaluate the relative magnitudes of the three potential sources of disturbance. The sediment contamination created by the estuary was identified as the most important cause of reduced sediment quality, as disturbance in all three components of the Sediment Quality Triad were only found in a site located near the estuary.