Impact fragmentation experiments of basalts and pyrophyllites

Results of impact fragmentation experiments for basalts and pyrophyllites are reported. Aluminum cylindrical projectiles were impacted on cubic basalt and pyrophyllite targets at velocities of 70 to 990 m/sec. The targets and projectiles were 20 g to 3.3 kg and 2 to 20 g in weight respectively. Weights of the fragments produced by impacts were measured and the size distributions of fragments were examined. Data of the largest fragment mass (m_L) normalized to the original target mass (M_t), m_L/M_t, correlate better with the nondimensional impact stress, P_I, a new scaling parameter introduced by H. Mizutani, Y. Takagi, and S. Kawakami (1984, in preparation) than the conventional projectile's kinetic energy per unit target mass, E/M_t, used in the previous studies. All the m_L/M_t data for basalts obtained in the present study are summarized by m_L/M_t = 2.95 × 10^?2P_I^?1 where P_I = P₀L³/YR³, P₀ = peak shock pressure, L = projectile size, R = target size and Y = material strength of target. For aluminum targets, however, the m_L/M_t is 2.5 orders of magnitude larger than that for brittle targets at impacts with the same P_I. Size distributions of fragments expressed in a log N - log (m/M_t) diagram divided into three regimes bounded by two inflection points. In each regime the curve is expressed by $\text{N (>}\text{m}\text{M}{}_{\mathrm{t}}\text{) = A (}\text{m}\text{M}{}_{\mathrm{t}}\text{)}{}^{\mathrm{?a}}$. The slopes, a, of the log $\text{N -}\text{log}\text{(}\text{m}\text{M}{}_{\mathrm{t}}\text{)}$ curves in the regimes of a large and a medium size range are positively correlated with the nondimensional impact stress, P_I, and expressed as a = C₃ + a₃log P_I. The slopes, a, in the smallest size range are, on the other hand, nearly constant and have values of $\text{0.5}\text{to}\text{0.7 (}\text{1}\text{2}\text{?}\text{2}\text{3}\text{)}$. Present results indicate that the impact fragmentation is scaled well by the new scaling parameter, P_I, of Mizutani, Takagi, and Kawakami and that the present experimental data may shed new light on planetary impact processes.     

Petrographic and mineralogical study of hydrothermal alteration of the Rokko Granite at Hakusui-kyo and Horai-kyo along the Arima-Takatsuki Tectonic Line in western Japan

Field, hand specimen, and microscopic investigations alongside X-ray diffraction analyses revealed four types of hydrothermal alteration (Type-A, -B, -C, and -D) based on the mode of occurrence of altered rocks and alteration mineral assemblage at Hakusui-kyo and Horai-kyo along the Arima-Takatsuki Tectonic Line (ATTL) in western Japan. Type-A alteration locally occurred as gray alteration halos with sulfide minerals. Type-B and -C alterations were confined to fault gouge veins and occurred as greenish-gray veins and brown veins, respectively. Type-C alteration crosscut Type-B alteration. These alterations were associated with a number of granitic fragments including cohesive breccia and micrographic facies. Type-D alteration occurred locally in brown sediments. Different mineralogical features in the four alterations are summarized as (Type-A) illite; (Type-B) chlorite; (Type-C) limonite (Fe³⁺ hydroxides and goethite) and calcite; and (Type-D) limonite. We propose that the alterations can be broadly divided into Paleocene hydrothermal alteration (Type-A) and post-Late Miocene hydrothermal alteration (Type-B, -C, and -D): Type-A alteration occurred at approximately 200 °C during hydrothermal activity after a granitic intrusion in Late Cretaceous; Type-B, -C and -D alterations occurred under hydrothermal activity accompanying deep fluids with repeated ascents invoked by the seismicity of the ATTL after the Late Miocene. The fluids may have been the “Arima-type thermal waters” (i.e., mixtures of convective groundwater and Na-Ca-Cl-HCO₃-type fluids). Type-B alteration occurred in fractures at depths where the temperature was ≥150 °C. Type-C alteration overprinted Type-B alteration as a result of mixing of new deep fluids and descending oxidized meteoric water near the surface. Fe³⁺ hydroxides and calcite precipitated from the fluids due to the oxidation of Fe²⁺ and the degassing of CO₂, respectively, at ambient to near-boiling temperatures. When the ascending fluids gushed out from the fractures, they generated Type-D alteration at the surface under similar temperature conditions due to the oxidation of Fe²⁺.     

Out‐of‐plane stability of buckling‐restrained braces including moment transfer capacity

Buckling‐restrained braces (BRBs) are widely used as ductile seismic‐resistant and energy‐dissipating structural members in seismic regions. Although BRBs are expected to exhibit stable hysteresis under cyclic axial loading, one of the key limit states is global flexural buckling, which can produce an undesirable response. Many prior studies have indicated the possibility of global buckling of a BRB before its core yields owing to connection failure. In this paper, BRB stability concepts are presented, including their bending‐moment transfer capacity at restrainer ends for various connection stiffness values with initial out‐of‐plane drifts, and a unified simple equation set for ensuring BRB stability is proposed. Moreover, a series of cyclic loading tests with initial out‐of‐plane drifts are conducted, and the results are compared with those of the proposed equations. © 2013 The Authors. Earthquake Engineering & Structural Dynamics published by John Wiley & Sons Ltd.     

Deep water observations of extreme waves with moored and free GPS buoys

Point-positioning GPS-based wave measurements were conducted by deep ocean (over 5,000 m) surface buoys moored in the North West Pacific Ocean in 2009, 2012, and 2013. The observed surface elevation bears statistical characteristics of Gaussian, spectrally narrow ocean waves. The tail of the averaged spectrum follows the frequency to the power of ?4 slope, and the significant wave height and period satisfies the Toba’s 3/2 law. The observations compare well with a numerical wave hindcast. Two large freak waves exceeding 13 m in height were observed in October 2009 and three extreme waves around 20 m in height were observed in October 2012 and in January 2013. These extreme events are associated with passages of a typhoon and a mid-latitude cyclone. Horizontal movement of the buoy revealed that the orbital motion of the waves at the peak of the wave group mostly exceed the weakly nonlinear estimate. For some cases, the orbital velocity exceeded the group velocity, which might indicate a breaking event but is not conclusive yet.     

Lunar photometric properties at wavelengths 0.5-1.6 μm acquired by SELENE Spectral Profiler and their dependency on local albedo and latitudinal zones

The lunar photometric function, which describes the dependency of the observed radiance on the observation geometry, is used for photometric correction of lunar visible/near-infrared data. A precise photometric correction parameter set is crucial for many applications including mineral identification and reflectance map mosaics. We present, for the first time, spectrally continuous photometric correction parameters for both sides of the Moon for wavelengths in the range 0.5-1.6 μm and solar phase angles between 5° and 85°, derived from Kaguya (SELENE) Spectral Profiler (SP) data. Since the measured radiance also depends on the surface albedo, we developed a statistical method for selecting areas with relatively uniform albedos from a nearly 7000-orbit SP data set. Using the selected data set, we obtained empirical photometric correction parameter sets for three albedo groups (high, medium, and low). We did this because the photometric function depends on the albedo, especially at phase angles below about 20° for which the shadow hiding opposition effect is appreciable. We determined the parameters in 160 bands and discovered a small variation in the opposition effect due to the albedo variation of mafic mineral absorption. The consistency of the photometric correction was checked by comparing observations made at different times of the same area on the lunar surface. Variations in the spectra obtained were lower than 2%, except for the large phase angle data in mare. Lastly, we developed a correction method for low solar elevation data, which is required for high latitude regions. By investigating low solar elevation data, we introduced an additional correction method. We used the new photometric correction to generate a 1° mesh global lunar reflectance map cube in a wavelength range of 0.5-1.6 μm. Surprisingly, these maps reveal that high latitude (?75°) regions in both the north and south have much lower spectral continuum slopes (color ratio r_1547.7nm/r_752.8nm ? 1.8) than the low and medium latitude regions, which implies lower degrees of space weathering.     

Raman spectroscopic and calorimetric observations on natural gas hydrates with cubic structures I and II obtained from Lake Baikal

This study reports measurements of the Raman spectra of Lake Baikal gas hydrates and estimations of the hydration number of methane-rich samples. The hydration number of gas hydrates retrieved from the southern Baikal Basin (crystallographic structure I) was approx. 6.1. Consistent with previous results, the Raman spectra of gas hydrates retrieved from the Kukuy K-2 mud volcano in the central Baikal Basin indicated the existence of crystallographic structures I and II. Measurements of the dissociation heat of Lake Baikal gas hydrates by calorimetry (from the decomposition of gas hydrates to gas and water), employing the hydration number, revealed values of 53.7–55.5?kJ?mol^–1 for the southern basin samples (structure I), and of 54.3–55.5?kJ?mol^–1 for the structure I hydrates and 62.8–64.2?kJ?mol^–1 for the structure II hydrates from the Kukuy K-2 mud volcano.     

Thermal anomalies associated with shallow gas hydrates in the K-2 mud volcano, Lake Baikal

Thermal measurements and hydrate mapping in the vicinity of the K-2 mud volcano in Lake Baikal have revealed a particular type of association of thermal anomalies (29–121?mW?m^–2) near hydrate-forming layers. Detailed coring within K-2 showed that hydrates are restricted to two distinct zones at sub-bottom depths exceeding 70–300?cm. Temperature data from stations with hydrate recovery and degassing features all display low thermal gradients. Otherwise, the thermal gradients within the mud volcano are generally increased. These findings imply a more complicated thermal regime than often assumed for mud volcanoes, with important roles for both fluids and hydrates. The coexistence of neighbouring low and high thermal anomalies is interpreted to result from discharging and recharging fluid activity, rather than hydrate thermodynamics. It is suggested that hydrates play a key role in controlling the fluid circulation pattern at an early stage. At a later stage, the inflow of undersaturated lake water would favour the dissolution of structure I hydrates and the formation of structure II hydrates, the latter having been observed on top of structure I hydrates in the K-2 mud volcano.     

‘Thailand was a desert' during the mid‐Cretaceous: Equatorward shift of the subtropical high‐pressure belt indicated by eolian deposits (Phu Thok Formation) in the Khorat Basin,northeastern Thailand

The Tibetan Plateau is a key factor in controlling the present‐day climate and atmospheric circulation pattern in Asia. The pattern of atmospheric circulation after the uplift of the plateau is well known, whereas direct evidence is lacking regarding the nature of the circulation pattern prior to the uplift. The distribution of desert directly reflects the position of the subtropical high‐pressure belt, and the prevailing surface‐wind pattern recorded in desert deposits reveals the position of its divergence axis. Cretaceous eolian sandstone of the Phu Thok Formation is extensively exposed in the northern Khorat Basin, northeastern Thailand. We conducted a sedimentological study on this formation to reconstruct temporal changes in the latitude of the subtropical high‐pressure belt in low‐latitude Asia during the Cretaceous. Spatio‐temporal changes in the paleo‐wind directions recorded in the Phu Thok Formation reveal that the Khorat Basin mainly belonged to the northeast trade wind belt and subtropical high‐pressure belt was situated to the north of the Khorat Basin during the initial stages of deposition, shifted southward to immediately above the basin during the main phase of deposition, and then shifted northward again to the north of the basin during the final stages of deposition. The paleomagnetic polarity sequence obtained for the Phu Thok Formation comprises three zones of normal polarity and two of reversed polarity, correlating to chrons M1n to C34n of the geomagnetic polarity time scale. This result suggests that the Phu Thok Formation is mid‐Cretaceous in age (from c. 126 Ma to c. 99–93 Ma), similar to the age of eolian sandstone in the Sichuan Basin, southern China (the Jiaguan Formation). These results, in combination with paleo‐wind direction data, suggest the development of low‐latitude desert and an equatorward shift of the subtropical high‐pressure belt (relative to the present‐day) in Asia during the mid‐Cretaceous.     

Multi-directional wave spectra from marine X-band radar

The signal measured by heave–pitch–roll directional wave buoys yields the first four coefficients of a Fourier series. Data adaptive methods must be employed to estimate a directional wave spectrum. Marine X-band radars (MRs) have the advantage over buoys that they can measure “model-free” two-dimensional (2D) wave spectra. This study presents the first comprehensive validation of MR-derived multi-directional wave characteristics. It is based on wave data from the 2010 Impact of Typhoons on the Ocean in the Pacific (ITOP) experiment in the Philippine Sea, namely MR measurements from R/V Roger Revelle, Extreme Air–Sea Interaction (EASI) buoy measurements, as well as WAVEWATCH-III (WW3) modeling results. Buoy measurements of mean direction and spreading as function of frequency, which do not require data adaptive methods, are used to validate the WW3 wave spectra. An advanced MR wave retrieval technique is introduced that addresses various shortcomings of existing methods. Spectral partitioning techniques, applied to MR and WW3 results, reveal that multimodal seas are frequently present. Both data sets are in excellent agreement, tracking the evolution of up to 4 simultaneous wave systems over extended time periods. This study demonstrates MR’s and WW3’s strength at measuring and predicting 2D wave spectra in swell-dominated seas.