Hydrodynamical non-radiative accretion flows in two dimensions

Two-dimensional (axially symmetric) numerical hydrodynamical calculations of accretion flows that cannot cool through emission of radiation are presented. The calculations begin from an equilibrium configuration consisting of a thick torus with constant specific angular momentum. Accretion is induced by the addition of a small anomalous azimuthal shear stress which is characterized by a function ν . We study the flows generated as the amplitude and form of ν are varied. A spherical polar grid which spans more than two orders of magnitude in radius is used to resolve the flow over a wide range of spatial scales. We find that convection in the inner regions produces significant outward mass motions that carry away both the energy liberated by and a large fraction of the mass participating in the accretion flow. Although the instantaneous structure of the flow is complex and dominated by convective eddies, long-time averages of the dynamical variables show remarkable correspondence to certain steady-state solutions. The two-dimensional structure of the time-averaged flow is marginally stable to the Høiland criterion, indicating that convection is efficient. Near the equatorial plane, the radial profiles of the time-averaged variables are power laws with an index that depends on the radial scaling of the shear stress. A stress in which ν ∝ r ^1/2 recovers the widely studied self-similar solution corresponding to an ' α -disc'. We find that, regardless of the adiabatic index of the gas, or the form or magnitude of the shear stress, the mass inflow rate is a strongly increasing function of radius, and is everywhere nearly exactly balanced by mass outflow. The net mass accretion rate through the disc is only a fraction of the rate at which mass is supplied to the inflow at large radii, and is given by the local, viscous accretion rate associated with the flow properties near the central object.     

Towards the Construction of Climate Change Scenarios

Climate impacts assessments need regional scenarios of climate change for a wide range of projected emissions. General circulation models (GCMs) are the most promising approach to providing such information, but as yet there is considerable uncertainty in their regional projections and they are still too costly to run for a large number of emission scenarios. Simpler models have been used to estimate global-mean temperature changes under a range of scenarios. In this paper we investigate whether a fixed pattern from a GCM experiment scaled by global-mean temperature changes from a simple model provides an acceptable estimate of the regional climate change over a range of scenarios. Changes estimated using this approximate approach are evaluated by comparing them with results from ensembles of a coupled ocean-atmosphere model. Five specific emissions scenarios are considered. For increases in greenhouse gases only, the 'error' in annual mean temperature for the cases considered is smaller than the sampling error due to the model's internal variability. The method may break down for scenarios of stabilisation of concentrations, because the patterns change as the model approaches equilibrium. The inclusion of large local perturbations due to sulphate aerosols can lead to significant deviations of the temperature pattern from that obtained using greenhouse gases alone. Combining separate patterns for the responses to greenhouse gases and aerosols may improve the accuracy of approximation. Finally, the accuracy of the scaling approach is more difficult to assess for deriving changes in regional precipitation because many of the regional changes are not statistically significant in the climate change projections considered here. If precipitation changes are only marginally significant in other models, the apparent disagreement between different models may be as much due to sampling error as to genuine differences in model response.     

Comparison of 4D tomographic mapping versus thin-shell approximation for ionospheric delay corrections for single-frequency GPS receivers over North America

The majority of navigation satellite receivers operate on a single frequency. They compensate for the ionospheric delay using either an ionospheric model which typically only corrects for 50% of the delay or a thin-shell map of the ionosphere. A 4D tomographic imaging technique is used to map the free electron density over the full-height of the ionosphere above North America during autumn 2003. The navigation solutions computed using correction based upon the thin-shell and the full-height maps are compared in this paper. The maps are used to calculate the excess propagation delay on the L1 frequency experienced by GPS receivers at selected locations across North America. The excess delay is applied to correct the single-frequency pseudorange observations at each location, and the improvements to the resulting positioning are calculated. It is shown that the thin-shell and full-height maps perform almost as well as a dual-frequency carrier-smoothed benchmark and for most receivers better than the unfiltered dual-frequency benchmark. The full-height corrections perform well and are considerably better than thin-shell corrections under extreme storm conditions.     

The fusion crust of the Winchcombe meteorite: A preserved record of atmospheric entry processes

Fusion crusts form during the atmospheric entry heating of meteorites and preserve a record of the conditions that occurred during deceleration in the atmosphere. The fusion crust of the Winchcombe meteorite closely resembles that of other stony meteorites, and in particular CM2 chondrites, since it is dominated by olivine phenocrysts set in a glassy mesostasis with magnetite, and is highly vesicular. Dehydration cracks are unusually abundant in Winchcombe. Failure of this weak layer is an additional ablation mechanism to produce large numbers of particles during deceleration, consistent with the observation of pulses of plasma in videos of the Winchcombe fireball. Calving events might provide an observable phenomenon related to meteorites that are particularly susceptible to dehydration. Oscillatory zoning is observed within olivine phenocrysts in the fusion crust, in contrast to other meteorites, perhaps owing to temperature fluctuations resulting from calving events. Magnetite monolayers are found in the crust, and have also not been previously reported, and form discontinuous strata. These features grade into magnetite rims formed on the external surface of the crust and suggest the trapping of surface magnetite by collapse of melt. Magnetite monolayers may be a feature of meteorites that undergo significant degassing. Silicate warts with dendritic textures were observed and are suggested to be droplets ablated from another stone in the shower. They, therefore, represent the first evidence for intershower transfer of ablation materials and are consistent with the other evidence in the Winchcombe meteorite for unusually intense gas loss and ablation, despite its low entry velocity.     

Iron(III) accumulations in inland saline waterways,Hunter Valley,Australia: Mineralogy,micromorphology and pore-water geochemistry

Discharge of Fe(II)-rich groundwaters into surface-waters results in the accumulation of Fe(III)-minerals in salinized sand-bed waterways of the Hunter Valley, Australia. The objective of this study was to characterise the mineralogy, micromorphology and pore-water geochemistry of these Fe(III) accumulations. Pore-waters had a circumneutral pH (6.2–7.2), were sub-oxic to oxic (Eh 59–453 mV), and had dissolved Fe(II) concentrations up to 81.6 mg L⁻¹. X-ray diffraction (XRD) on natural and acid-ammonium-oxalate (AAO) extracted samples indicated a dominance of 2-line ferrihydrite in most samples, with lesser amounts of goethite, lepidocrocite, quartz, and alumino-silicate clays. The majority of Fe in the samples was bound in the AAO extractable fraction (Fe^Ox) relative to the Na-dithionite extractable fraction (Fe^Di), with generally high Fe^Ox:Fe^Di ratios (0.52–0.92). The presence of nano-crystalline 2-line ferrihydrite (Fe₅HO₃·4H₂O) with lesser amounts of goethite (α-FeOOH) was confirmed by scanning electron microscopy (SEM) coupled with energy dispersive X-ray analysis (EDX), and transmission electron microscopy (TEM) coupled with selected area electron diffraction (SAED). In addition, it was found that lepidocrocite (γ-FeOOH), which occurred as nanoparticles as little as ∼5 lattice spacings thick perpendicular to the (0 2 0) lattice plane, was also present in the studied Fe(III) deposits. Overall, the results highlight the complex variability in the crystallinity and particle-size of Fe(III)-minerals which form via oxidation of Fe(II)-rich groundwaters in sand-bed streams. This variability may be attributed to: (1) divergent precipitation conditions influencing the Fe(II) oxidation rate and the associated supply and hydrolysis of the Fe(III) ion, (2) the effect of interfering compounds, and (3) the influence of bacteria, especially Leptothrix ochracea.     

Assessing landslide movements in volcanic islands using near-shore marine geophysical data: south Pico island,Azores

Marine geophysical data from around the submarine flanks of volcanic islands can potentially help to resolve whether large-scale instability of an edifice has been geologically recently active. We use geophysical data to investigate part of the coast of Pico Island of the Azores where, above sea-level, a major slump of Topo volcano has been interpreted previously from arcuate escarpments and a rugged irregular topography seaward of them. Multibeam echo-sounder data collected offshore of this feature show remarkably little evidence for slump fault movements in the island's submarine slope. Mid-slope benches, like those associated with the Hilina Slump of Kilauea, are absent. The high-resolution data extends onto the island's shelf, allowing us to evaluate evidence for continuing activity there. In particular, as the shelf's rock platform will have been last modified by surf erosion during the postglacial period of sea-level transgression, it provides a reference surface of intermediate age (7–19 ka) that can potentially reveal whether any movements occurred in pre-historic times. Where the arcuate escarpments are continued offshore, the modern seabed shows no bathymetric evidence for active faults where the shelf rock platform crops out in the multibeam data. Elsewhere, mobile shelf sediments could be disguising evidence for active faulting so we examined boomer profiles able to image the rock platform beneath them. The data reveal a platform that is steep (6.6°) compared with the dips of platforms that we have studied previously around the coast of adjacent Faial Island and steeper than the platform outside the proposed slump. This suggests that it was created by coastal erosion over a shorter period and hence is consistent with a younger age of the coastline. As with the multibeam data, where escarpments are continued offshore onto the shelf, the rock surface imaged with these boomer data also shows no clear evidence of major slump-related fault displacements. This study therefore illustrates how high-resolution boomer seismic and multibeam data could usefully contribute to hazard assessment of volcanic islands, by helping to evaluate areas with no historical movements. Explanations to reconcile the onshore and offshore data here are also put forward.     

Lava penetrating water: the different behaviours of pāhoehoe and ‘a‘ā at the Nesjahraun, Tingvellir, Iceland

The Nesjahraun is a basaltic lava flow erupted from a subaerial fissure, extending NE along the Tingvellir graben from the Hengill central volcano that produced pāhoehoe lava followed by ‘a‘ā. The Nesjahraun entered Iceland’s largest lake, Tingvallavatn, along its southern shore during both phases of the eruption and exemplifies lava flowing into water in a lacustrine environment in the absence of powerful wave action. This study combines airborne light detection and ranging, sidescan sonar and Chirp seismic data with field observations to investigate the behaviour of the lava as it entered the water. Pāhoehoe sheet lava was formed during the early stages of the eruption. Along the shoreline, stacks of thin (5–20 cm thick), vesicular, flows rest upon and surround low (<5 m) piles of coarse, unconsolidated, variably oxidised spatter. Clefts within the lava run inland from the lake. These are 2–5 m wide, >2 m deep, ∼50 m long, spaced ∼50 m apart and have sub-horizontal striations on the walls. They likely represent channels or collapsed tubes along which lava was delivered into the water. A circular rootless cone, Eldborg, formed when water infiltrated a lava tube. Offshore from the pāhoehoe lavas, the gradient of the flow surface steepens, suggesting a change in flow regime and the development of a talus ramp. Later, the flow was focused into a channel of ‘a‘ā lava, ∼200–350 m wide. This split into individual flow lobes 20–50 m wide along the shore. ‘A‘ā clinker is exposed on the water’s edge, as well as glassy sand and gravel, which has been locally intruded by small (<1 m), irregularly shaped, lava bodies. The cores of the flow lobes contain coherent, but hackly fractured lava. Mounds consisting predominantly of scoria lapilli and the large paired half-cone of Grámelur were formed in phreatomagmatic explosions. The ‘a‘ā flow can be identified underwater over 1 km offshore, and the sidescan data suggest that the flow lobes remained coherent flowing down a gradient of <10°. The Nesjahraun demonstrates that, even in the absence of ocean waves, phreatomagmatic explosions are ubiquitous and that pāhoehoe flows are much more likely to break up on entering the water than ‘a‘ā flows, which, with a higher flux and shallow underlying surface gradient, can penetrate water and remain coherent over distances of at least 1 km.     

Chlorinated Solvent Source‐Zone Remediation via ZVI‐Clay Soil Mixing: 1‐Year Results

ZVI‐Clay is an emerging remediation approach that combines zero‐valent iron (ZVI)‐mediated degradation and in situ stabilization of chlorinated solvents. Through use of in situ soil mixing to deliver reagents, reagent‐contaminant contact issues associated with natural subsurface heterogeneity are overcome. This article describes implementation, treatment performance, and reaction kinetics during the first year after application of the ZVI‐Clay remediation approach at Marine Corps Base Camp Lejeune, North Carolina. Primary contaminants included trichloroethylene, 1,1,2,2‐tetrachloroethane, and related natural degradation products. For the field application, 22,900 m³ of soils were treated to an average depth of 7.6 m with 2% ZVI and 3% sodium bentonite (dry weight basis). Performance monitoring included analysis of soil and water samples. After 1 year, total concentrations of chlorinated volatile organic compounds (CVOCs) in soil samples were decreased by site‐wide average and median values of 97% and >99%, respectively. Total CVOC concentrations in groundwater were reduced by average and median values of 81% and >99%, respectively. In several of the soil and groundwater monitoring locations, reductions in total CVOC concentrations of greater than 99.9% were apparent. Further reduction in concentrations of chlorinated solvents is expected with time. Pre‐ and post‐mixing average hydraulic conductivity values were 1.7 × 10^?5 and 5.2 × 10^?8 m/s, respectively, indicating a reduction of about 2.5 orders of magnitude. By achieving simultaneous contaminant mass depletion and hydraulic conductivity reduction, contaminant flux reductions of several orders of magnitude are predicted.