中国近海鹑螺科的研究

鹑螺科是中腹足目鹑螺总科中的一个小科,包括的种类不多,数量也不大,但是它的贝壳较大,又较有光泽,而且具有整齐的肋纹和色彩,所以是人们喜爱搜集的贝类之一。它们的肉均可食用,贝壳常同其他贝类的贝売和在一起烧制建筑用灰。这一科动物全部是暖水种,世界各暖海区都有分布,而以印度一西太平洋区的种类为最多,化石出现于第三纪。 本科动物的贝壳通常较薄,呈球形或卵圆形，螺旋部短,体螺层膨大,各层表面具有平滑的螺肋。壳口宽大,内面具沟纹,外唇薄或増厚形成一个具齿的环,水管沟宽短。成体不具厣。软体部分头大:前端膨大,触角长,呈圆柱状,眼位于其基部外侧的一个短柄上。吻极长,不能完全缩入壳内,呈管状,末端扩张形成蔷薇花状的唇部,伸展时长度可超过贝壳。水管长,伸展时可直立于贝売的背部。雄性交接器极长大,弯弓形,全长具沟,末端有一尖钩。为肉食性动物,常以海参等动物为食。 我国鹑螺科的种类过去金叔初和秉志、张玺、阎敦建等曾有零星记载,国外学者也有一些记载,但对各种的分布地点记载不详。我们根据中国科学院海洋研究所历年来采集保存的标本和全国海洋综合调查所采得的底栖动物标本进行了整理研究,共鉴定10种，其中1种仅在东海发现,4种为东海和南海共有,5种仅分布于南海;有一种,即黄口鹑螺在我国沿海尚系首次记录。     

对虾养殖生态系中有机碳的初步研究本研究由

对于围隔养殖对虾生态系中有机碳的变动进行了研究 ,结果表明 :溶解有机碳 (DOC)含量波动在 5 .2 99～ 13.39mg/ L之间 ,平均为 8.5 3mg/ L± 2 .2 5 mg/ L;颗粒有机碳 (POC)含量波动在0 .6 5～ 6 .6 3mg/ L之间 ,平均为 3.2 5 mg/ L± 1.76 mg/ L;总有机碳 (TOC)含量波动在 6 .92～ 2 0 .0 2mg/ L之间 ,平均为 11.78mg/ L± 3.82 mg/ L ;其中 DOC∶ POC∶ TOC为 0 .72∶ 0 .2 8∶ 1。各种有机碳组分的含量明显高于自然海水中各种有机碳的含量 ;各种有机碳组分的含量在养殖期间总体上呈上升的趋势 ;其变化与 DCOD的变化呈显著线性正相关的关系。     

济州岛南部海区的双跃层现象

本文分析了济州岛南部区域温度双跃层现象的类型及其成因。特别阐明了双跃层的波状现象,指出:强流锋区的侧向效应,黑潮次—中层混合水的爬升,黄海冷水团边缘密度环流引起的侧向流动,以及上、下层流速、流向不一致引起的剪切作用,是导致双跃层波状现象的主要原因。发现上、下跃层之间存在着“跃层间环流”,这是一个有趣的海洋学现象,它将导致双扩散的发生和有利于双跃层的维持。     

中国对虾(Penaeus chinensis)消化系统发生的研究

本文对中国对虾消化道和中肠腺的发生进行了研究。完整的中肠管形成于Ｎ３期，它是由幼虫腹面的内胚层板向背中线上卷合拢而形成。在Ｚ１期消化道完全贯通。至Ｍ１期，胃分化为贲门胃和幽门胃两部分，中肠前盲囊和中肠后盲囊也在此期出现，同时胃磨的雏形发生，但完整的胃磨形成于Ｐ期。另外，中肠腺始于Ｎ４－５期中肠前端突出的两对中肠腺盲囊。第一对中肠腺盲囊于Ｍ３期退化消失，而第二对中肠腺盲囊则发育为成体的中肠腺。中肠腺小管由４种不同类型的细胞（胚性细胞、吸收细胞、纤维细胞和泡状细胞）所组成     

海上平台桶形基础模型压力压贯与负压沉贯试验研究

介绍了海上平台桶形基础模型（模型桶）压力压贯和负压沉贯的试验概况,对比分析了两者贯入力的巨大差异和产生的原因,给出了模型桶压力压贯中贯入深度与压力的关系,负压没贯负压与贯入深度,抽吸泵流量,基土渗流量,桶内土塞隆起之间的关系,试验结果表明,负压沉贯可以大大降低以砂质粉土为基土的土抗力,为在胜利油田类似基土海域海上平台应用桶形基础提供了试验依据,为海上现场导管架桶形基础平台的安装就位施工和控制提供了     

Numerical and simplified methods for the calculation of the total horizontal wave force on a perforated caisson with a top cover

The VOF method and the k–ε model, combined with the equation of state of air at constant temperature, have been used to calculate the total horizontal wave force caused by monochromatic waves acting on a perforated caisson with a top cover. From comparison of various parameters, such as the total horizontal force, the pressure difference on the front wall, the pressure on the back wall and the pressure on the top cover, between the numerical results and test data, it can be seen that the numerical results agree well with the test data. It is concluded that the method described in this paper can be utilized to calculate wave forces acting on perforated caissons with a top cover in the case of nonovertopping, nonbreaking waves. A simplified method to calculate the total horizontal force has been developed, based on test data, using a least-squares method. A comparison between the numerical results and the values calculated from the simplified equations shows good agreement. Therefore the simplified equations can be used in engineering applications to evaluate the total horizontal force on a perforated caisson with a top cover.     

Research on the spectral analysis and test method of period signals in monthly mean sea level

Ｒｅｓｅａｒｃｈｏｎｔｈｅｓｐｅｃｔｒａｌａｎａｌｙｓｉｓａｎｄｔｅｓｔｍｅｔｈｏｄｏｆｐｅｒｉｏｄｓｉｇｎａｌｓｉｎｍｏｎｔｈｌｙｍｅａｎｓｅａｌｅｖｅｌ￥ＭａＪｉｒｕｉ；ＴｉａｎＳｕｚｈｅｎ；ＺｈｅｎｇＷｅｎｚｈｅｎａｎｄＣｈａｉＸｉｎｍｉｎ（Ｒ...     

Optimal Design for Main Dimensions of a 75000t Floating Production and Storage Vessel

The basis, process and results of the demonstration of the main dimensions of a 75000t floating production and storage vessel are discussed in this paper. A simple but reliable orthogonal design method is applied in the main dimension optimization. The ideas of gradual approximation and feedback from various aspects are put into effect. During the demonstration, in order to make the model tally with the actual situation, the draft design is closely related to the computational analysis, so that the demonstration model can be verified at any time; the handling of the overall system is closely related to the research of each item, which is beneficial not only to the mastery of various regularities, but also to the balance of decisions. Finally, according to the computational results and the regularities obtained from analysis, the main dimensions are determined.     

动荷载作用下海底粉土的孔压响应及其动强度

本文选用近海分布较广的粉土为研究对象 ,利用室内动三轴试验结果 ,找出动荷载作用下粉土的动应力应变关系 ,分析模拟波浪荷载作用下粉土中的孔压响应、临界循环次数 ,确定波浪作用下粉土的应力状态、破坏临界循环次数 ,判断不同深度处的粉土发生液化的可能性及发生液化所需要的时间 ;研究粉土在动荷载作用下的强度降低 ,为海上工程设计和施工提供科学依据。     

Nitrogen forms and decomposition of organic carbon in the southern Bohai Sea core sediments

Study on form characteristics of nitrogen in marine sediments is the primary method to research its biogeochemical cycling and nitrogen form characteristics in core sediments can reflect the process and results of early diagenesis in a certain degree. In this paper, Sequential extraction process in natural grain size was used for studying the existent forms of nitrogen in five core sediments of the southern Bohai Sea for the first time. Nitrogen was divided into two parts -transferable and fixed based on whether it could be extracted by the reagent. Distributions and early diagenesis of transferable nitrogen forms in the southern Bohai Sea were researched integratedly. Results indicate that IEF - N and OSF-N are predominant forms in transferable part in the studied core sediments. Contents of different nitrogen forms vary differently with depth, and have different diagenesis process. Decomposition constant of organic nitrogen (ON) and OC are about 15.51 × 10~(-3)a~(-1)and 4.79× 10~(-3)a~(-1) respective