Surface temperature differences between minerals in crystalline rocks: Implications for granular disaggregation of granites through thermal fatigue

Thermal expansion differences between minerals within rocks under insolation have previously been assumed to drive breakdown by means of granular disaggregation. However, there have been no definitive demonstrations of the efficacy of this weathering mechanism. Different surface temperatures between minerals should magnify thermal expansion differences, and thus subject adjacent minerals to repeated stresses that might cause breakdown through fatigue failure. This work confirms the existence of surface temperature differences between minerals in granitic rocks under simulated short-term temperature fluctuations so as to discriminate their potential for initiating granular disaggregation. The influence of colour, as a surrogate for albedo, and crystal size, as a function of thermal mass are specifically identified because of their ease of quantification. Four rock types with a range of these properties were examined, and subjected to repeated short-term temperature cycles by radiative heating and cooling under laboratory conditions. Results show that while albedo is the main control for overall and individual maximum temperatures, crystal size is the main factor controlling higher temperature differences between minerals. Thus, stones with large differences of mineral sizes can undergo magnified stresses due to thermal expansion differences.     

Derivation of indices using remote sensing data to evaluate cropping systems

This paper presents the work done in Bathinda District of Punjab state of India for evaluating the cropping system efficiency using multi-date, multi-year and multi-sensor satellite based remote sensing data along with various spatial and non-spatial collateral data. Three efficiency indices, such as Multiple Cropping Index (MCI), Area Diversity Index (DI), Cultivated Land Utilization Index (CLUI), have been worked out to characterize the cropping systems. The salient findings point out that, the MCI has, increased remarkably. A further increase is possible by only taking a third crop. The ADI has increased in kharif (rainy) season, due to introduction of rice in the cotton belt, however in rabi (winter) season the ADI has reduced nearly to one, showing it to be a mono-cropped situation. The CLUI is low (> 0.5) in many blocks, showing there is a great scope to improve it. Since in summer the land is remaining unutilized, a summer crop can very well be taken up to improve it.     

A response‐based decoupling criterion for multiply‐supported secondary systems

It is often infeasible to carry out coupled analyses of multiply‐supported secondary systems for earthquake excitations. ‘Approximate’ decoupled analyses are then resorted to, unless the response errors due to those are significantly high. This study proposes a decoupling criterion to identify such cases where these errors are likely to be larger than an acceptable level. The proposed criterion is based on the errors in the primary system response due to decoupling and has been obtained by assuming (i) the input excitation to be an ideal white noise process, (ii) cross‐modal correlation to be negligible, and (iii) the combined system to be classically damped. It uses the modal properties of the undamped combined system, and therefore, a perturbation approach has been formulated to determine the combined system properties in case of light to moderately heavy secondary systems. A numerical study has been carried out to illustrate the accuracy achieved with the proposed perturbation formulation. The proposed decoupling criterion has been validated with the help of two example primary‐secondary systems and four example excitation processes. Copyright © 2002 John Wiley & Sons, Ltd.     

Up to what temperature is petroleum stable? New insights from a 5200 free radical reactions model

The discovery of crude oils and condensates at ever higher temperatures casts doubt on the validity of the usual geochemical modelling approach, that uses empirical reactions and rate constants. The solution used to account for such a high thermal stability is presently to adjust the rate parameters, but the physical meaning and scientific value of such a strategy can be questioned. We have developed a mechanistic model consisting of 5200 lumped free radical reactions to describe the thermal evolution of a mixture of 52 organic species meant to represent light petroleum. Rate constants used are those available in the literature or estimated using well established thermochemistry-reactivity correlations. Chemical structures included in the model are linear, branched and cyclic hydrocarbons, hydro- and alkyl-aromatics, PAHs, and three heteroatomic compounds. Reactions include cracking and alkylation chains and inhibiting and accelerating reactions from the various reactants. This model has been applied to several mixtures with various proportions of reaction inhibitors and accelerators, and to a composition representing a light mature oil. From the results obtained, we conclude that mature oils will be stable up to 240–260 °C, depending on their composition, and that the thermal cracking of oil to gas is not possible under reasonable basin conditions. The kinetics of petroleum cracking are thus much slower than generally recognized.     

Integrated Two-Dimensional Modeling of Fluid Flow and Compaction in a Sedimentary Basin

In this paper we employ mixed finite elements and numerically study an integrated two-dimensional model of fluid flow and compaction in a sedimentary basin. This model describes a single phase incompressible flow in a two-dimensional section of a sedimentary basin with vertical compaction. At each time step, an iterative algorithm is used to solve this model. The determination of the grid movement is based on the mass conservation and movement of sediments in the basin, while the mixed method is utilized to solve the fluid flow over the moving grid. Numerical experiments are presented to verify this iterative algorithm and show representative solutions for the model under consideration.     

Premier pôle paléomagnétique,d'âge Moscovien contraint par un test du pli,obtenu dans le bassin d'Illizi (Craton saharien,Algérie)First palaeomagnetic pole,of Moscovian age constrained by a fold test,in the Illizi Basin (Saharan Craton,Algeria)

Palaeomagnetic study, carried out in the Moscovian (～305 Ma) formation in the Edjeleh anticline, shows the existence of three magnetisation components. Two of them are probably Cenozoic and Permian remagnetisations. The third component determined by both well defined ChRMs and remagnetisation circles analysis passes the fold test. Because the folding started before or during the Stephano-Autunian, this third component is the primary magnetisation. Its palaeomagnetic pole (28.3°S, 58.9°E), close to other poles from the Saharan platform obtained from neighbouring periods but without palaeomagnetic tests, confirms the age of these last data. To cite this article: B. Bayou et al., C. R. Geoscience 334 (2002) 81–87.     

Sediment yield and storage variations in the Négron River catchment (south western Parisian Basin,France) during the Holocene period

In the Négron River catchment area (162 km²), surface‐sediment stores are composed of periglacial calcareous ‘grèze’ (5 × 10⁶ t) and loess (21 × 10⁶ t), and Holocene alluvium (12·6 × 10⁶ t), peat (0·6 × 10⁶ t) and colluvium (18·5 × 10⁶ t). Seventy‐five per cent of the Holocene sediments is stored along the thalwegs. Present net sediment yield, calculated from solid discharge at the Négron outlet, is low (0·6 t km^?2 a^?1) due to the dominance of carbonate rocks in the catchment. Mean sediment yield during the Holocene period is 7·0 t km^?2 a^?1 from alluvium stores and 7·6 t km^?2 a^?1 from colluvium stores. Thus, the gross sediment yield during the Holocene period is about 18·7 t km^?2 a^?1 and the sediment delivery ratio 3 per cent. The yield considerably varies from one sub‐basin to another (3·9 to 24·5 t km^?2 a^?1) according to lithology: about 25 per cent and 50 per cent of initial stores of periglacial grèze and loess respectively were reworked during the Holocene period. Sediment yield has increased by a factor of 6 in the last 1000 years, due to the development of agriculture. The very high rate of sediment storage on the slope during that period (88 per cent of the yield) can be accounted for by the formation of cultivation steps (‘rideaux’). It is predicted that the current destruction of these steps will result in a sediment wave reaching the valley floors in the coming decades. Subboreal and Subatlantic sediments and pollen assemblages in the Taligny marsh, where one‐third of the alluvium is stored, show the predominant influence of human activity during these periods in the Négron catchment. Copyright © 2002 John Wiley & Sons, Ltd.     

Dublin days: the 2003 NAM

Mark E Bailey and Tom Ray give an overview of the National Astronomy Meeting in Dublin, where record numbers of astronomers went to talk, listen and network.     

La vallée d'Ys : un paléoréseau hydrographique immergé en baie de Douarnenez (Finistère,France)

Interpretation of the recent high-resolution survey, CANADOU 2000, in the Bay of Douarnenez (Finistère, France) allowed us to restore the morphology of the substratum and the sedimentary filling of the bay. The Brioverian and Palaeozoic substratum reveals a well-defined network of incised valleys as results of successive emergence stages of the Bay during the Quaternary. Valleys join in a westward-widened mean valley, called Ys Valley. The present-day sedimentary fill of the bay of Douarnenez appears mainly controlled by the Holocene rise and the consecutive highstand. It comprises fluvial and estuarine deposits filling up incised valleys and marine sedimentation extending out of the incised valleys. To cite this article: G. Jouet et al., C. R. Geoscience 335 (2003).To cite this article: G. Jouet et al., C. R. Geoscience 335 (2003).     

Wrench tectonics flip at oblique subduction. A model from New Zealand

In eastern North Island New Zealand, oblique subduction of the Pacific Plate beneath the Australian Plate is associated with strain partitioning. Dextral along-strike component of displacement occurred first at Early Miocene major faults within the eastern fore-arc domain. These faults were active from Early Miocene to Pliocene times. Since Pliocene times, most of the movement occurs at western faults such as the Wellington Fault. The latter joins the back-arc domain to the north. The jump of wrench faulting is related to the oblique opening of the back-arc domain. Both phenomena are impeded southwards by the Hikurangi oceanic plateau entering the subduction zone. To cite this article: J. Delteil et al., C. R. Geoscience 335 (2003).