Stability of three-dimensional metallic glass Ni68B21Si11

Under isothermal and linear heating conditions, the thermal stability of the three-dimensional metallic glass Ni₆₈B₂₁Si₁₁, produced by rapid quenching of the denucleated melt (RQDM), has been systematically studied using PE DSC7 differential scanning calorimetry in relation to denucleation of liquid alloy prior to rapid quenching, pre-anneal treatment of amorphous specimens, and cooling rate. The following results were observed. First, the thermal stability of metallic glass prepared by RQDM is obviously enhanced because of the removal of pre-existing nuclei in advance. This is substantiated by the experimental data showing that the projected life of three-dimensional metallic glass Ni₆₈B₂₁Si₁₁ is increased by an order of magnitude at 400 K. Secondly, pre-anneal treatment of the amorphous alloy leads to a reduction of temperature for the onset of crystallization,T _x, and crystallization heat, H. Finally, quenching rates have little effect on the thermal stability of amorphous alloys.     

含电容单元的级联H桥七电平调制策略

针对传统三单元级联H桥直流电源电压利用率较低的问题,采用电容替代其中利用率较低的直流电源,构成含电容单元的级联H桥逆变器。围绕该型逆变器的调制策略及电容选择等问题,在载波层叠式脉宽调制策略的基础上,利用冗余开关状态改进现有调制策略。通过采集电容电压和输出电流,切换调制模式实现电容充放电控制。分析电容电荷量在不同调制度下的变化,得到电容电压稳定到参考值所需要满足的条件。考虑到电容纹波电压不超过参考值10%的要求,并结合最大连续放电区间,计算出最小参考电容,使逆变器达到最优配置。通过仿真和实验证明了新型调制策略可对电容充电并具有良好的稳压效果。     

Surface Control and Electrical Tuning of MXene Electrode for Flexible Self-Powered Human–Machine Interaction

MXene materials emerge as promising candidates for energy harvesting and storage application. In this study, the effect of the surface chemistry on the work function of MXenes, which determines the performance of MXene-based triboelectric nanogenerator (TENG), is elucidated. First-principles calculations reveal that the surface functional group greatly influences MXene work function:  OH termination reduces the work function with respect to that of bare surface, while  F and  Cl increase it. Then, work functions are experimentally determined by Kelvin probe force microscopy. The MXene prepared by gentle etching at 40 °C for 48 h (GE_40/48) has the largest work function. Furthermore, an electron-cloud potential-well model is established to explain the mechanism of electron emission-dominated charge transfer and assemble a triboelectric device to verify experimentally its conclusions. It is found that GE_40/48 has the best performance with a 281 V open-circuit voltage, 9.7 µA short-current current, and storing 1.019 µC of charge, which is consistent with the model. Last, a patterned TENG is demonstrated for self-powered human–machine interaction application. This finding enhances the understanding of the inherent mechanism between the surface structure and the output performance of MXene-based TENG, which can be applied to other TENG based on 2D materials.     

Ultraprecise 3D Printed Graphene Aerogel Microlattices on Tape for Micro Sensors and E-Skin

3D printed graphene aerogels hold promise for flexible sensing fields due to their flexibility, low density, conductivity, and piezo-resistivity. However, low printing accuracy/fidelity and stochastic porous networks have hindered both sensing performance and device miniaturization. Here, printable graphene oxide (GO) inks are formulated through modulating oxygen functional groups, which allows printing of self-standing 3D graphene oxide aerogel microlattice (GOAL) with an ultra-high printing resolution of 70 µm. The reduced GOAL (RGOAL) is then stuck onto the adhesive tape as a facile and large-scale strategy to adapt their functionalities into target applications. Benefiting from the printing resolution of 70 µm, RGOAL tape shows better performance and data readability when used as micro sensors and robot e-skin. By adjusting the molecular structure of GO, the research realizes regulation of rheological properties of GO hydrogel and the 3D printing of lightweight and ultra-precision RGOAL, improves the sensing accuracy of graphene aerogel electronic devices and realizes the device miniaturization, expanding the application of graphene aerogel devices to a broader field such as micro robots, which is beyond the reach of previous reports.     

Doped/Undoped A1-A2 Typed Copolymers as ETLs for Highly Efficient Organic Solar Cells

The electron transport layer (ETL) is a critical component in achieving high device performance and stability in organic solar cells. Conjugated polyelectrolytes (CPEs) have become an attractive alternative due to film-forming properties and ease of preparation. However, p-type CPEs generally exhibit poor charge mobility and conductivity, incorporation of electron-withdrawing units forming alternated D-A conjugated backbone can make up for these deficiencies. Herein, the ratio of electron withdrawing moieties are further increased and two poly(A1-alt-A2) typed PIIDNDI-Br and PDPPNDI-Br based on the combination of naphthalene diimide (NDI) with isoindigo (IID) or diketopyrrolopyrrole (DPP) via direct arylation polycondensation are synthesized. These CPEs possess excellent alcohol solubility, a suitable lowest unocuppied molecular orbital energy level, and work function tunability. Surprisingly, the incorporation of IID and DPP units generate distinct self-doping behaviors, which are confirmed by UV–vis absorption and ESR spectra. However, no matter doped or undoped, both CPEs present better charge-transporting properties and conductivity when utilized as ETLs. The PIIDNDI-Br and PDPPNDI-Br display good universal compatibility with the blend of PM6:Y6 and PM6:L8-BO, and PCEs of 18.32% and 18.36% are obtained, respectively, which also present excellent storage stability. In short, the combination of two different acceptors demonstrates an efficient strategy to design highly efficient ETLs for high performance photovoltaic devices.     

Ultraefficient Non-Doped Deep Blue Fluorescent OLED: Achieving a High EQE of 10.17% at 1000 cd m−2 with CIEy<0.08

The pursuit for efficient deep blue material is an ever-increasing issue in organic optoelectronics field. It is a long-standing challenge to achieve high external quantum efficiency (EQE) exceed 10% at brightness of 1000 cd m⁻² with a Commission International de L'Eclairage (CIE_y) <0.08 in non-doped organic light-emitting diodes (OLEDs). Herein, this study reports a deep blue luminogen, PPITPh, by bonding phenanthro[9,10-d]imidazole moiety with m-terphenyl group via benzene bridge. The non-doped OLED based on PPITPh exhibits an exceptionally high EQE of 11.83% with a CIE coordinate of (0.15, 0.07). The EQE still maintains 10.17% at the brightness of 1000 cd m⁻², and even at a brightness as high as 10000 cd m⁻², an EQE of 7.5% is still remained, representing the record-high result among non-doped deep-blue OLEDs at 1000 cd m⁻². The unprecedented device performance is attributed to the reversed intersystem crossing process through hot exciton mechanism. Besides, the maximum EQE of orange phosphorescent OLED with PPITPh as host is 32.02%, and remains 31.17% at the brightness of 1000 cd m⁻². Such minimal efficiency roll-off demonstrates that PPITPh is also an excellent phosphorescent host material. The result offers a new design strategy for the enrichment of high-efficiency deep blue luminogen.     

Reduced Graphene Oxides Modified Bi2Te3 Nanosheets for Rapid Photo-Thermoelectric Catalytic Therapy of Bacteria-Infected Wounds

Temperature variation-induced thermoelectric catalytic efficiency of thermoelectric material is simultaneously restricted by its electrical conductivity, Seebeck coefficient, and thermal conductivity. Herein, Bi₂Te₃ nanosheets are in situ grown on reduced graphene oxides (rGO) to generate an efficient photo-thermoelectric catalyst (rGO-Bi₂Te₃). This system exhibits phonon scattering effect and extra carrier transport channels induced by the formed heterointerface between rGO and Bi₂Te₃, which improves the power factor value and reduces thermal conductivity, thus enhancing the thermoelectric performance of 2.13 times than single Bi₂Te₃. The photo-thermoelectric catalysis of rGO-Bi₂Te₃ significantly improves the reactive oxygen species yields, resulting from the effective electron–hole separation caused by the unique thermoelectric field and heterointerfaces of rGO-Bi₂Te₃. Correspondingly, the electrospinning membranes containing rGO-Bi₂Te₃ nanosheets exhibit high antibacterial efficiency in vivo (99.35 ± 0.29%), accelerated tissue repair ability, and excellent biosafety. This study provides an insight into heterointerface design in photo-thermoelectric catalysis.     

Piezoelectric Nanostructured Surface for Ultrasound-Driven Immunoregulation to Rescue Titanium Implant Infection

Treating bacterial biofilm infections on implanted materials remains challenging in clinical practice, as bacteria can be resistant by weakening the host defense from immune cells like macrophages. Herein, a metal-piezoelectric hetero-nanostructure with mechanical energy-driven antimicrobial property is in situ constructed on the Ti implant. Under ultrasonic irradiation, the formed piezotronic Ti (piezoTi) can promote the generation of reactive oxygen species (ROS) by facilitating local charge transfer at the surface, thus leading to piezodynamic killing of Staphylococcus aureus (S. aureus) while downregulating biofilm-forming genes. In addition, the stimulated macrophages on piezoTi display potent phagocytosis and anti-bacterial activity through the activation of PI3K-AKT and MAPK pathway. As a demonstration, one-time ultrasound irradiation of piezoTi pillar implanted in an osteomyelitis model efficiently eliminates the S. aureus biofilm infection and rescues the implant with enhanced osteointegration. By the synergistic effect of ultrasound-driven piezodynamic therapy and immuno-regulation, the proposed piezoelectric nanostructured surface can endow Ti implants with highly efficient antibacterial performance in an antibiotic-free, noninvasive, and on-demand manner.     

Multifunctional Organic Potassium Salt Additives as the Efficient Defect Passivator for High-Efficiency and Stable Perovskite Solar Cells

Despite the rapid developments are achieved for perovskite solar cells (PSCs), the existence of various defects in the devices still limits the further enhancement of the power conversion efficiency (PCE) and the long-term stability of devices. Herein, the efficient organic potassium salt (OPS) of para-halogenated phenyl trifluoroborates is presented as the precursor additives to improve the performance of PSCs. Studies have shown that the 4-chlorophenyltrifluoroborate potassium salt (4-ClPTFBK) exhibits the most effective interaction with the perovskite lattice. Strong coordination between  BF₃⁻/halogen in anion and uncoordinated Pb²⁺/halide vacancies, along with the hydrogen bond between F in  BF₃⁻ and H in FA⁺ are observed. Thus, due to the synergistic contribution of the potassium and anionic groups, the high-quality perovskite film with large grain size and low defect density is achieved. As a result, the optimal devices show an enhanced efficiency of 24.50%, much higher than that of the control device (22.63%). Furthermore, the unencapsulated devices present remarkable thermal and long-term stability, maintaining 86% of the initial PCE after thermal test at 80 °C for 1000 h and 95% after storage in the air for 2460 h.     

An Efficient One-Arrow-Two-Hawks Strategy Achieves High Efficiency and Stable Batch Variance for Benzodifuran-based Polymer Solar Cells

With the development of organic solar cells (OSCs), the high-performance and stable batch variance are becoming a new challenge for designing polymer donors. To obtain high photovoltaic performance, adopting polymers with high molecular weight as donors is an ordinary strategy. However, the high molecular weight need to subtly control the reaction time and state, inevitably caused batch-to-batch variations. Herein, a strategy of steric effect is applied to benzodifuran (BDF)-based polymer by introducing different positions of Cl atom, producing two polymers PBDFCl-1 and PBDFCl-2. The more twisted side chains conformation not only achieve the control of moderate molecular weight for PBDFCl-2, but also easily form molecular stacking through adopting BDF unit and maintain sufficient polymeric crystallinity. Due to the optimized stacking mode and good blend miscibility, PBDFCl-2-based device exhibitsa more elegant power conversion efficiency (PCE) of 17.00% compared to PBDFCl-1-based device. This is the highest efficiency record for BDF-based binary OSCs. Meanwhile, the PCE device variation of the different molecular weights for PBDFCl-2 is little, indicating the reduction of the batch variation. Therefore, smartly using steric effect of Cl atom in strong crystalline BDF unit can form efficient molecular stacking regulations and realize the coordination of high-performance and stable batch variance.