Reaction behaviors and specific exposed crystal planes manipulation mechanism of TiC nanoparticles

Titanium carbide (TiC) nanoparticles with well-designed exposed crystal planes perform intriguing prospects for functional and engineering applications. In this study, a simple and controllable in situ synthesis strategy was proposed for the synthesis of TiC nanoparticles with specific morphology. Reaction behaviors suggested that most of TiC nanoparticles were formed by an instantaneous reaction between Al₃Ti and Al₄C₃ in the Al-rich melt and the resultant morphology was controlled by the discrepant growing rates of (100) and (111) crystal planes. In addition, a growth morphology control model was presented for the prediction and manipulation of the morphology of TiC nanoparticles by the doping of different alloying elements Me (Me = Cu, Mg, Mn, Zn, and Si). According to the morphological observations and density functional theory analyses including the interface energy, charge density differences, and orbital hybridization: Cu, Mg, and Zn atoms could stabilize the Al/TiC(111) interface, whereas Mn and Si atoms promoted the rapid growing and disappearance of the TiC(111) planes in the Al melt. This work provides a feasible way to intelligently design and manipulate TiC nanoparticles with desirable exposed crystal planes, and exhibits a promising prospect for personalized applications.     

Nondestructive measurements of residual stress in air plasma-sprayed thermal barrier coatings

Premature spallation of thermal barrier coatings (TBCs) is a critical issue during the service of gas turbines, and nondestructive evaluation is crucial to address this problem. Herein, a novel approach that indicates delamination by measuring the residual stress evolution of thermally grown oxide (TGO) for air plasma spraying (APS) TBCs is proposed and verified via the combination of photoluminescence piezo-spectroscopy (PLPS) and X-ray computed tomography. A mineral-oil-impregnating approach and a cold-mount low-shrinkage epoxy-mounting approach are used to alleviate the signal attenuation by pores and microcracks in APS TBCs, improving the detectable PLPS signal and X-ray transmission for stress measurement and delamination characterization, respectively. We have nondestructively measured the TGO residual stress mapping in APS TBCs and its evolution with oxidation. Furthermore, the evolution of TGO morphology and critical microcracks are obtained by X-ray computed tomography. The synchronous evolution of TGO residual stress, TGO thickness, and critical microcracks as a function of oxidation time is obtained and correlated. The transition point, as experimentally identified, at which the TGO stress starts to drop, agrees well with the critical moment of microcrack coalescence. This directly verifies that the TBC delamination can be effectively indicated by residual stress evolution of TGO in APS TBCs.     

Sintering parameter optimization of Tb3Al5O12 magneto-optical ceramics by vacuum sintering and HIP post-treatment

Transparent terbium aluminum garnet (TAG) ceramics were achieved by the vacuum sintering plus HIP post-treating from the coprecipitated TAG nanoparticles. The influences of vacuum sintering temperature and sintering aid TEOS on the optical quality of the TAG ceramics were studied. The results show that with the increase of sintering temperature, the optical quality of TAG ceramics is improved gradually, and the in-line transmittance of the TAG ceramics treated at 1720°C for 20 hours under vacuum and then HIP post-treated at 1700°C for 3 hours under 200 MPa argon gas is 81.6% at 1064 nm. The sintering additive TEOS can improve the optical quality of TAG ceramics and inhibit the valence state change of Tb³⁺ ions to Tb⁴⁺ during the annealing process. The Verdet constant of the TAG ceramics at 632.8 nm is about −178 rad·T⁻¹·m⁻¹ at room temperature, which is 1.3 times that of the commercial TGG crystals (−134 rad·T⁻¹·m⁻¹).     

Enhanced luminescence and thermal stability of (Sr,Ca)AlSiN3:Eu2+ via superficial organic carbon modification

The Eu²⁺-activated nitride phosphors have been widely used in solid-state lighting, but the applications in high-power white-light-emitting diodes (wLEDs) field require higher thermal stability of luminescent materials. The oxidation of Eu²⁺ and the damage of nitride host in the Eu²⁺-activated nitride phosphors are the two crucial reasons for the luminescence loss while operating. A superficial organic carbon modification is performed on the red-emitting (Sr,Ca)AlSiN₃:Eu²⁺ phosphor via the incorporation of organic carbon by solution mixing and thermal post-treatment under the N₂-H₂ atmosphere. After the superficial organic carbon modification, the oxidation of Eu²⁺ and the formation of impurity phases on the phosphor surface are effectively reduced. When the superficial organic carbon modified sample was treated in the 2 wt.% sucrose solutions, the relative brightness is strengthened by 2.15%, the thermal quenching characteristic is improved by 8.9% at 300℃, and the aging test results show an excellent thermal stability. All above indicate that the superficial organic carbon modification is a promising technique to enhance the thermal stability of analogous Eu²⁺-activated nirtide phosphors.     

Electrochemical investigation of La0.4Sr0.6TiO3 synthesized in air for SOFC application

Journal of Applied Electrochemistry - La-doped titanate materials have been widely investigated as alternative Ni-free anodes for solid oxide fuel cells (SOFCs). In this study, La0.4Sr0.6TiO3 (LST)...     

Polyethylenimine-modified sugarcane bagasse cellulose as an effective adsorbent for removing Cu(II) from aqueous solution

Polyethylenimine-modified sugarcane bagasse cellulose (SBCMP), as a new adsorbent, was synthesized by the reaction of polyethylenimine (PEI) with sugarcane bagasse cellulose and glutaraldehyde. The adsorption of Cu(II) by SBCMP was pH-dependent, and the higher removal efficiency of Cu(II) appeared in the range of pH 3.0–6.0. The adsorption isothermal data fitted well with the Langmuir model, and the maximum adsorption capacity of SBCMP was up to 107.5 mg/g. The adsorption kinetics was best described by the pseudo-second-order kinetic. The adsorption of Cu(II) by SBCMP was unfavorable at high temperatures, and thermodynamic analyses implied that the adsorption of Cu(II) by SBCMP was an exothermic reaction. Fourier transform infrared spectroscopy (FT-IR) combined with X-ray photoelectron spectroscopy (XPS) revealed that Cu(II) adsorption on SBCMP mainly controlled by the nitrogen atoms of  NH group in PEI. The results of regeneration cycles showed that SBCMP was suitable for reuse in the adsorption of Cu(II) from aqueous solution. These experimental results suggested that SBCMP is expected to be a new biomass adsorbent with high efficiency in removing Cu(II) from wastewater.     

Enhancing flame retardant and antistatic properties of polyamide 6 by a grafted multiwall carbon nanotubes

In order to improve the flame retardancy and antistatic properties of polyamide 6 (PA6) at as low amount of additives as possible, an integrated-functional additive was synthesized by 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) and multiwalled carbon nanotubes (MWCNTs). The results showed 2 wt% of DOPO-MWCNTs distributed in PA6 formed an electric network and decreased volume resistivity sharply to 3.1 × 10⁸ Ω cm. In other words, it helped PA6 to get to the percolation threshold of semiconductor. By using of 3 wt% DOPO-MWCNTs, the severe dripping in burning of PA6 was almost controlled. The possible reason was also ascribed to the network formed by evenly dispersed DOPO-MWCNTs, which strengthened the char structure and held severe dripping of PA6. As a result, the heat and smoke release were also suppressed obviously. The most important is that CO release was about half cut in CONE test.     

Highly-modified polylactide transparent blends with better heat-resistance,melt strength,toughness and stiffness balance due to the compatibilization and chain extender effects of methacrylate-co-glycidyl methacrylate copolymer

A core-shell modifier with the cross-linked acrylate and silicone copolymer as the core and polymethyl methacrylate (PMMA) as the shell (PASi-g-PMMA) was used to toughen the brittle polylactide (PLA). In addition, the copolymer of methyl methacrylate (MMA) and glycidyl methacrylate (GMA) (MG) was utilized to further enhance the modification efficiency of the PASi-g-PMMA. The MG copolymer played the double roles of compatibilizer and chain extender, which not only improved the interfacial adhesion between the PLA and PASi-g-PMMA particles, but also increased the molecular weight and chain entanglement of the PLA. Compared with the PASi-g-PMMA toughened PLA blend, the PLA/PASi-g-PMMA/MG blends showed much higher heat-resistance, melt strength, transparency, toughness and stiffness balance. When the PASi-g-PMMA content was 20 wt%, 20 wt% MG increased the glass transition temperature (T_g), complex viscosity (η*), transparency, impact and tensile strength of PLA/PASi-g-PMMA blend from 60.1°C, 1.9 × 10³ Pa·s, 76.1%, 748 J/m and 37 MPa to 71.5°C, 0.5 × 10⁴ Pa·s, 78.4%, 860 J/m and 45 MPa for the PLA/PASi-g-PMMA/MG blend. This research provided a facile and practical method to overcome the shortcomings of the PLA and promoted its application in broader fields.     

High-efficiency ammonium polyphosphate intumescent encapsulated polypropylene flame retardant

The flame retardant polypropylene containing the micro-envelope core-shell structure flame retardant, which encapsulated ammonium polyphosphate into melamine-formaldehyde resin and sodium silicate through in situ polymerization was prepared with polyamide 6, added as a carbon-forming agent. The composition of ammonium polyphosphate, encapsulated ammonium polyphosphate with melamine-formaldehyde resin and the micro-envelope core-shell structure flame retardant were characterized. The fire safety and thermal stability were investigated and showed an improvement including limiting oxygen index, thermogravimetric analysis, vertical burning tests, and microscale combustion calorimeter. The burned compounds were also studied to confirm the burning mechanism. The results showed the flame retardant performance had been greatly improved, while polyamide 6 had better char-forming effect. Besides, the water solubility of flame retardants and their influence on the mechanical properties of polypropylene were also investigated. The results on the effects of additives demonstrated a high efficiency flame retardant to polypropylene. A core-shell flame retardant that sodium silicate and melamine-formaldehyde resin-coated ammonium polyphosphate had been constructed. The effect of the built flame retardant system on the combustion performance of polypropylene was studied from the mechanism and performance. The LOI of the most flame retardant polypropylene reached 28.6%, and UL-94 reached the V-0 level.     

Effects of hydrolysis treatment on the structure and properties of semi-interpenetrating superabsorbent polymers

A semi-interpenetrating polymer network superabsorbent polymer based on sodium lignosulfonate-graft-poly(acrylic acid-acrylamide)/potassium dihydrogen phosphate and polyvinyl alcohol (PVA/SL-g-P[AA-AM]/KDP) was synthesized by using solution polymerization. The PVA/SL-g-P(AA-AM)/KDP was further hydrolyzed in NaOH solution. The structure, thermal stability, and morphologies of samples were examined by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). The results of FTIR, TGA, and DSC showed that PVA interpenetration through SL-g-P(AA-AM)/KDP network has occurred, and PVA/SL-g-P(AA-AM)/KDP was successfully alkaline hydrolyzed. From the SEM images, the high porous and loose surface structure of polymers was formed after hydrolysis, which greatly increased the specific surface area. Samples after hydrolysis exhibited higher equilibrium swelling capacity (1963 g/g) compared to the nonhydrolyzed samples (866 g/g). The swelling kinetics of all samples well complied with the pseudo-second order swelling kinetics model. Simple hydrolysis treatment not only improved the swelling capacity of PVA/SL-g-P(AA-AM)/KDP but also induced an enhancement on its water retention performance, which made it potentially useful as a water retention agent in the revegetation of abandoned mines or slope wasteland.