Research on indoor experimentation of range SAL imaging system

By means of advantages of both SAR and lidar, the combination of the techniques of (inverse) synthetic aperture and lidar makes it possible to obtain high resolution 2-D image. In this paper, an indoor experimental system of inverse synthetic aperture lidar imaging is given and a processing approach is presented. The given system is in the mode of lidar system with separated receiver and transmitter, which can effectively eliminate the jamming from the lens or/and the intersection between two optic fibers. ...     

区域创新能力评价指标体系及实证

在考察国内外区域创新研究现状的基础上,给出了区域创新能力的概念及内容,设计了区域创新能力评价指标体系,并利用2007年的统计数据,围绕知识创造、知识流动、企业技术创新、技术创新环境和创新的经济绩效等5个方面,运用主成分和层次分析法对我国31个省市的创新能力进行了分析,东部省市的整体创新能力水平较高,东北和中部次之,西部较差.     

粉煤灰效应的模糊综合评价

我们从粉煤灰的具体特性出发,总结和吸取了人们长期积累的实践经验,建立了粉煤灰效应的模糊综合评价层次结构模型,构造了需水量比、强度比、颗粒形态等因素的隶属函数,采用层次分析法计算了各因素在粉煤灰效应模糊综合评价中的权重。最后应用模糊综合评价方法综合了各因素对粉煤灰效应的“贡献”程度,工程实例证明该方法可以有效地描述粉煤灰效应的评价结果。     

基于嵌入式多串口扩展的出租车智能导航终端设计与实现

目前,ARM处理器在嵌入式系统中得到了广泛的应用,但其通常只有3个及以下的串口,难以满足需要多串口设备的系统需求;分析研究基于ARM处理器的智能车载导航终端的多串口扩展问题,提出采用具有单串口扩展为5串口功能的串口扩展芯片GM8125,实现嵌入式系统的多串口扩展需求,并在串口通信中采用分层设计的方法,提高系统的稳定性和运行效率;该出租车智能移动导航终端系统经过实际调试与运行,能够实现预定功能且效果良好,能够应用到新型的智能交通调度系统中。     

丙烯膜法脱水工艺技术的研究分析

传统的丙烯脱水工艺存在能耗高、丙烯浪费大、再生氦器气用量大等缺点。蒸汽渗透技术具有能耗低、过程简单、分离因子高、操作灵活等优点，而且它的渗透通量较低，这使得它特别适用于微量可凝组分的分离。本研究以脱除丙烯中微量水分为目的，以聚乙烯醇、壳聚糖为复合膜活性层，聚砜中空纤维膜为支撑层，制备出多种中空纤维复合膜。考察制膜条件及实验操作条件对膜性能的影响。     

Preparation and characterization of SO42-/TiO2 and S2O82-/TiO2 catalysts

Nanosized solid superacids SO₄ ²⁻/TiO₂ and S₂O₈ ²⁻/TiO₂, as well as MCM-41-supported SO₄ ²⁻/ZrO₂, were prepared. Their structures, acidities, and catalytic activities were investigated and compared using XRD, N₂ adsorption-desorption, and in situ FTIR-pyridine adsorption, as well as an evaluation reaction with pseudoionone cyclization. The results showed that SO₄ ²⁻/TiO₂ and S₂O₈ ²⁻/TiO₂ possess not only nanosized particles with diameters < 7.0 nm, a BET surface greater than 140 cm²/g and relatively regular mesostructures with pores around 4.0 nm, but also a pure anatase phase and strong acidity. Different from the Lewis acid nature of SO₄ ²⁻/ZrO₂/MCM-41, SO₄ ²⁻/TiO₂ and S₂O₈ ²⁻/TiO₂ exhibit mainly Bronsted acidities. The strongest Bronsted acid sites were produced on SO₄ ²⁻/TiO₂ promoted with H₂SO₄, while Lewis acid sites on S₂O₈ ²⁻/TiO₂ even stronger than those on SO₄ ²⁻/ZrO₂/MCM-41 were generated when persulfate solution was used as sulfating agent. Because of their distinct acid natures, SO₄ ²⁻/TiO₂ and S₂O₈ ²⁻/TiO₂ exhibited catalytic activities for the cyclization of pseudoionone that were much higher than that of SO₄ ²⁻/ZrO₂/MCM-41. It can be concluded that the existence of more Br?nsted acid sites was favorable for proton participation in the cyclization reaction. Translated from Journal of Chemical Engineering of Chinese Universities, 2006, 20(2): 239–244 [译自: 高校化学工程学报]     

基于α-叔碳-β,γ-不饱和醛的制备全合成番茄红素

将一种α-取代-α,β-不饱和醛的制备方法应用于番茄红素(Ⅵ)的全合成中,通过该法以廉价的原料假性紫罗兰酮(Ⅰ)制备了2,6,10-三甲基-3,5,9-十一烷三烯-1-醛(Ⅱ),然后与四乙基亚甲基二磷酸酯(Ⅲ)经过Wittig-Horner反应得到关键中间体3,7,11-三甲基-1,4,6,10-四烯十二烷基膦酸二乙酯(Ⅳ),最终和2,7-二甲基-2,4,6-辛三烯-1,8-二醛(Ⅴ)进行Wittig-Horner反应、转位异构合成全反式番茄红素。反应共经历3步线性反应,总产率为37.0%。最终产物的结构采用IR、HRMS和NMR进行确证。     

氯化汞复配触媒的开发与应用

氯化汞复配触媒在合成氯乙烯工业生产中的应用试验表明 ,该触媒的使用寿命比氯化汞长 ,利用率高 ,降低了PVC树脂生产成本 ,具有明显的经济效益     

增粘树脂在SBS改性胶粘剂中的应用

研究了增粘树脂在SBS改性胶粘剂中的应用，其中包括增粘树脂品种、用量对胶粘剂剥离强度的影响，同时研究了该胶粘剂对各种鞋材的粘结性。结果表明，该胶对许多鞋材的初粘力和剥离强度都达到了制鞋业的要求。     

基于标定的任意半径柱面上2维条形码畸变校正

摘 要：二维条码在直接零件标识技术中应用越来越广泛,但存在标刻在柱形零件上的二维条码由于扭曲形变而无法识读的问题。为了校正这种畸变,论文分析了柱面二维条码的畸变形成原理,然后基于标定的机器视觉装置与透视投影原理建立柱面上二维条码畸变校正模型,最后通过图像信息估计出柱形零件半径参数信息,并代入畸变校正模型得到最终的校正结果。实验结果表明,该方法能够较好的校正自由半径柱面上二维条码的扭曲畸变。