A new block-based method for copy move forgery detection under image geometric transforms

Copy move forgery detection (CMFD) is one of the most active subtopic in forgery scheme. The methods of CMFD are divided into to block-based method and keypoint-based method in general. Compared with keypoint-based method, block-based method can detect undetectable detail without morphology segmentation. But many block-based methods detect the plain copy-move forgeries only. They have been incompetent to detect the post-processing operations such as various geometrical distortions, and then fail to detect the forgery regions accurately. Therefore, this paper presents an improved block-based efficient method for CMFD. Firstly, after pre-processing, an auxiliary overlapped circular block is presented to divide the forged image into overlapped circular blocks. The local and inner image feature is extracted by the Discrete Radial Harmonic Fourier Moments (DRHFMs) with the overlapped circular block from the suspicious image. Then, the similar feature vectors of blocks are searched by 2 Nearest Neighbors (2NN) test. Euclidean distance and correlation coefficient is employed to filter these features and then remove the false matches. Morphologic operation is employed to delete the isolated pixels. A series of experiments are done to analyze the performance for CMFD. Experimental results show that the new DRHFMs can obtain outstanding performance even under image geometrical distortions.     

通用扫描线多边形填充算法

传统的扫描线多边形填充算法只适用于水平扫描线的逐行填充。文章提出通用扫描线多边形填充算法,该算法可以有效地解决任意间距、任意倾角的扫描线对多边形的填充问题。通用扫描线多边形算法采用了坐标变换、浮点数舍入策略等重要方法。顶点扫描线号是该算法中的核心概念。     

Convergence Results of One-Leg and Linear Multistep Methods for Multiply Stiff Singular Perturbation Problems

One-leg methods and linear multistep methods are two class of important numerical methods applied to stiff initial value problems of ordinary differential equations. The purpose of this paper is to present some convergence results of A-stable one-leg and linear multistep methods for one-parameter multiply stiff singular perturbation problems and their corresponding reduced problems which are a class of stiff differential-algebraic equations. Received April 14, 2000; revised June 30, 2000     

操作参数对玻纤毡增强复合材料流动成型的影响

研究了玻纤毡增强热塑性复合材料(GMT)流动成型过程中模腔压力和材料流动方向对制品力学性能和纤维取向的影响。研究表明：随着压力提高，弯曲强度和模量同步增加；但压力超过18MPa后，性能变化不明显。随布料面积分数减小，单轴拉伸流动成型将导致沿流动方向和垂直流动方向强度及模量差异变大，纤维取向严重；但双轴拉伸流动成型得到的制品各方向性能较均匀，基本呈现各向同性。     

碳纤维／铜—5%锡基复合材料的弯曲性能

测定了具有不同碳纤维的短碳纤维增强铜-5％锡基复合材料的弯曲强度值,实验表明:随碳纤维体积含量的增大,弯曲强度上升,并近似符合σ=94.5-421V_f+1557V_f~2(MPa)拟合式。与粉末治金铁基摩擦材料的弯曲性能对比表明:复合材料的弯曲性能较好。对碳/铜复合材料的弯曲断口作了扫描电镜观察,断口呈“部分拔出型”。最后,结合弯曲强度实验结果及断口观察,初步分析了该复合材料的断裂过程。     

新疆奎屯河洪水特征和最大值研究

洪水极易造成各种灾害,对当地经济发展影响巨大,通过对奎屯河洪水特征分析研究,揭示奎屯河洪水和最大值规律,以便制定措施治害兴利,为防洪和工程管理及当地经济发展提供科学依据。     

Acoustic emission generated during the gas sorption–desorption process in coal

An experimental system for monitoring the acoustic signals generated in coal during gas sorption and/or desorption was designed and the acoustic signals were observed under different gas pressures. The experimental results show that signals generated by the coal during gas adsorption are attenuated over time. Also, the signals are not continuous but are impulsive. The intensity of the signals generated during gas desorption is far smaller than that observed during adsorption. The signal seen during desorption remains essentially stable. Cycles of sorption and desorption cause acoustic emission signals that exhibit a memory effect, which depends upon the maximum gas pressure the sample was exposed to in earlier cycles. Lower pressures in subsequent cycles, compared to the maximum adsorption pressure in previous cycles, cause both the energy and impulse frequency to be lower than previously. On the contrary, a gas adsorption pressure that exceeds the maximum pressure seen by the sample during earlier cycles causes both the energy and impulse frequency to be high.     

Nature of the porosity in American coals

The nature of the porosity in a number of 40 × 70 (i.e. − 40 + 70) mesh size American coals, varying in rank from anthracite to lignite, has been studied using the following characterization techniques: gas adsorption, helium and mercury displacement, and mercury porosimetry. Surface areas calculated from carbon dioxide adsorption at 298 K are consistently higher than those calculated from nitrogen at 77 K, indicating the molecular sieve character of the coals. Total pore volumes have been measured in the diameter range 12–29 600 Å and then divided into macropores (300-29 600 Å), transitional pores (12–300 Å), and micropores (4–12 Å). Coals vary widely in their total pore volumes (porosities range between 4.1 and 23.2%). In the lower-rank coals (carbon content less than 75%), porosity is primarily due to the presence of macropores. In coals having a carbon content in the range 76–84%, about 80% of the total open pore volume is due to micro and transitional pores, whereas in the coals of higher carbon content microporosity predominates. Coals having about 35–55% of their total open pore volume in the transitional range are expected to be most suitable for use for adsorption of organic molecules from solution. Thus, they are of interest as possible materials to be used in water purification. In general, these results are considered to be of importance in understanding the extent and rate of interaction of coals with gases and liquids.     

高分子铁盐混凝剂的开发与应用进展

高分子铁盐混凝剂是一类高效水处理剂，也是较广泛应用的絮凝剂，作者简要地阐述了近年来我国高分子铁盐混凝剂的开发及应用领域的研究进展情况。     

利用土壤固化剂固化粉煤灰筑坝特性研究

研究了新型土壤固化剂固化粉煤灰的工程特性,确定了粉煤灰、石屑和水的最优配比,论证并证明了其工程应用的可行性,为大规模应用提供了理论依据和范例。