Enthalpies of mixing of <Emphasis Type="Italic">o</Emphasis>- and <Emphasis Type="Italic">m</Emphasis>-isomers at 298.15 K

Excess enthalpies (H ^E) of 17 binary mixtures of o- and m-isomers of dichlorobenzene, difluorobenzene, methoxymethylbenzene, dimethylbenzene, dimethoxybenzene, aminofluorobenzene, fluoronitrobenzene, diethylbenzene, chlorofluorobenzene, fluoroiodobenzene, bromofluorobenzene, chloromethylbenzene, fluoromethylbenzene, bromomethylbenzene, iodomethylbenzene, fluoromethoxybenzene, dibromobenzene at 298.15 K were measured. All excess enthalpies measured were very small, and those of o-+m-isomers of aminofluorobenzene, dibromobenzene and iodomethylbenzene were negative but 14 other binary mixtures of isomers were positive over the whole range of mole fractions. H ^E of o-+m-isomers of dimethoxybenzene showed the largest enthalpic instability and those of aminofluorobenzene showed the largest enthalpic stability. There was a correlation between dipole–dipole interaction, dipole–induced dipole interaction or entropies of vaporization and excess partial molar enthalpies at infinite dilution.     

Dehalogenation of o-dihalogen substituted arenes and α,α′-dihalogen substituted o-xylenes with lanthanum metal

It was found that lanthanum metal caused the dehalogenation of o-dihalogen substituted arenes and α,α′-dihalogen substituted o-xylenes to generate the corresponding benzynes and o-quinodimethanes. When o-dihalogen substituted arenes were allowed to react with lanthanum metal in the presence of dienes, the Diels-Alder products between benzyne and dienes were formed in moderate to good yields. Similarly, the Diels-Alder adducts of o-quinodimethane with dienophiles were obtained, in the reaction of α,α′-dibromo-o-xylenes with lanthanum metal in the presence of dienophiles.     

Determination of iodine in organic iodine compounds by non-equilibrium isotope exchange in a heterogeneous exchange system

Some water-soluble organic iodine compounds (aqueous solution) can be analyzed for iodine by isotopically exchanging with labelled elementary iodine (organic solution). The method is applicable to exchange systems in which the rate of the exchange is rather small but measurable, before the exchange equilibrium is attained. The iodine content of iodoaromatic amino acids such as 5-iodouracil and 3,5-diiodotyrosine can be determined within an error of ±4%.     

The photochemical synthesis of 4-acyl-1,2-dimethyl-3H-phenothiazin-3-ones

4-Acyl-1,2-dimethyl-3H-phenothiazin-3-ones were prepared by the photochemical reaction of 1,2-dimethyl-3H-phenothiazin-3-one with aldehydes. The structures of the newly prepared compounds were determined by elemental analysis, spectroscopic methods (ir, nmr and ms) and comparison with a sample prepared by an alternate route.     

Optical CO(2) sensor of the combination of colorimetric change of alpha-naphtholphthalein in poly(isobutyl methacrylate) and fluorescent porphyrin in polystyrene

An optical CO₂ sensor based on the overlay of the CO₂ induced absorbance change of pH indicator dye α-naphtholphthalein in poly(isobutyl methacrylate) (polyIBM) layer with the fluorescence of tetraphenylporphyrin (TPP) in polystyrene layer is developed. The observed luminescence intensity from TPP at 655 nm increased with increasing the CO₂ concentration. The ratio I₁₀₀/I₀ value of the sensing film consisting of α-naphtholphthalein in polyIBM and TPP in polystyrene layer, where I₀ and I₁₀₀ represent the detected luminescence intensities from a layer exposed to argon and CO₂ saturated conditions, respectively, that the sensitivity of the sensor, is estimated to be 192. The response and recovery times of the sensing film are less than 6.0 s for switching from argon to CO₂, and for switching from CO₂ to argon. The signal changes are fully reversible and no hysterisis is observed during the measurements. The highly sensitive optical CO₂ sensor based on fluorescence intensity changes of TPP due to the absorption change of α-naphtholphthalein in polyIBM layer with CO₂ is achieved.     

Isothermal differential scanning calorimetry on an exothermic phenomenon during thermal decomposition of hydromagnesite 4 MgCO3 · Mg(OH)2 · 4 H2O

An exothermic phenomenon and a simultaneous rapid evolution of a small amount of carbon dioxide at ?500°C during thermal decomposition of hydromagnesite 4 MgCO₃ · Mg(OH)₂ · 4 H₂O was studied by isothermal DSCTG in a carbon dioxide atmosphere. It was quantitatively confirmed that the exothermic phenomenon was due to crystallization of MgCO₃ from the amorphous phase and that the evolution of carbon dioxide was due to decomposition of the MgCO₃ by the heat of crystallization (?3.4 kcal mole^?1.     

Electronic structures of I2− and I4− ions in γ-irradiated rigid solutions

Radical-anions of iodine, bromine, and monoiodochloride are produced in γ-irradiated amorphous solids at 77 K, and their electronic and ESR spectra measured. On limited warming of the irradiated solution dimerization by the reaction I₂^? + I₂ → I₄^? occurs to produce the same species as reported by Fornier de Violet et al. The electronic structure of the dimeric anion is discussed in comparison with the monomeric anion.     

Cu(I)-catalyzed direct enantioselective cross aldol-type reaction of acetonitrile

Direct catalytic enantioselective cross aldol-type reaction of an acetate surrogate was developed using Cu alkoxide-chiral phosphine complexes as catalysts. Chemoselective activation and deprotonation of the donor substrate (acetonitrile) by the soft metal alkoxide in a strongly donating solvent (HMPA) are key to success in this reaction. Useful chemical yields and promising enantioselectivities are produced using either DTBM-SEGPHOS or a tuned BIPHEP as a chiral ligand. [reaction: see text]     

Reversible color changes in lamella hybrids of poly(diacetylenecarboxylates) incorporated in layered double hydroxide nanosheets

The present study is an investigation of a reversible thermal color change induced in lamella hybrids of poly(diacetylenecarboxylates) incorporated in layered double hydroxide (LDH) nanosheets. These poly-[m,n]/LDH hybrids prepared by the photo- or gamma-ray-induced polymerization of diacetylenecarboxylates, i.e., CH(3)(CH(2))(m)()(-)(1)CC-CC(CH(2))(n)()(-)(1)CO(2)(-) (mono-[m,n]), and intercalated in LDH lamella sheets, were observed to develop colors ranging from yellow to blue. The change in color was found to depend greatly on the alkyl carbon numbers of the mono-[m,n] (m,n = 10,11; 5,11; 10,5; 16,1) values. Moreover, the conformational alignment of the mono-[m,n] within the LDH was observed to be a crucial factor in color development, which was greatly affected by the intercalation degrees and extent of poly(ene-yne) linkage elongation of the polymers. For the poly-[m,n]/LDH hybrids investigated, a reversible color change was found to occur repeatedly and remarkably for the poly-[10,11]/LDH hybrid. This color change occurred at temperatures between ca. 20 and 80 degrees C back and forth from purple red to bright orange, in stark contrast to the irreversible color change for poly-[10,11] without LDH. Moreover, DSC and Raman spectroscopic studies of the LDH hybrids showed that the thermochromic temperature corresponded to the phase transition temperature of 80 degrees C. XRD analysis also indicated that the poly-[m,n]/LDH hybrid could retain its lamella structure during such thermochromic color changes, enabling conformational recovery in the polymer chains by a cooling down of the hybrids to temperatures lower than the transition temperature, while the nonhybrid poly-[10,11] powders exhibited an irreversible color change at 60 degrees C, above which the polymer powder turned amorphous.