Thermal behavior of ternary Sm2Fe17Nx magnets

The Mössbauer spectra of Sm₂Fe₁₇N_x, prepared by the nitrogenation of Sm₂Fe₁₇ powders in an ammonia and hydrogen atmosphere, were observed at elevated temperatures to shed light on the thermal behavior of nitrogen in the compounds Sm₂Fe₁₇N_x. It was found that there were large differences in thermal behavior between the starting Sm₂Fe₁₇, crystalline Sm₂Fe₁₇N_x (x≈1.7) and amorphous Sm₂Fe₁₇N_x(x～7). The thermal decomposition behavior of Sm₂Fe₁₇N_3.2, developed as one of the most promising hard magnetic materials, was found to be different under different atmospheres.     

Phototoxic process after rapid photosensitive membrane damage of 5,5"-bis(aminomethyl)-2,2':5',2"-terthiophene dihydrochloride

We report a new aspect of rapid (<30 s) light-induced cell membrane damage photosensitized by 5,5"-bis(aminomethyl)-2,2':5',2"-terthiophene dihydrochloride (BAT), which is a water-soluble alpha-terthienyl analogue, using a high-power laser (light intensity 1.6 W cm(-2)). In this paper, we will discuss the relationship between the exposure time of the cells to the photosensitizer and the phototoxic process. Three toxic processes can be identified: first, a non-light-mediated toxicity dependent on BAT-cell incubation; second, a phototoxicity independent of BAT exposure time when the BAT concentration is in the 2-10-microM range; third, a phototoxicity dependent on BAT exposure time when BAT concentration becomes 20 microM. The cytotoxicity decreases when alpha-tocopherol, an antioxidant, is added to a cell membrane. This pattern of phototoxicity is the typical of a phospholipid peroxidation chain reaction and oxidative damage of membrane proteins triggered by a reactive oxygen species generated by a triplet state of BAT. The BAT exposure time is clearly correlated with the partition of the photosensitizer in the cell membrane and inside the cell.     

Analysis of conjugated linoleic acids as 9-anthrylmethyl esters by reversed-phase high-performance liquid chromatography with fluorescence detection

A simple and highly sensitive method for determining the fatty acid composition of food lipids containing conjugated linoleic acid (CLA) is described. The method is based on the separation of the 9-anthrylmethyl ester derivatives of saturated and unsaturated (conjugated and non-conjugated) fatty acids by reversed-phase high-performance liquid chromatography with fluorescence detection. Just like the other fatty acids, CLA reacts readily with 9-anthryldiazomethane at room temperature to produce 9-anthrylmethyl esters without isomerization and decomposition of the conjugated double bonds. Clear resolution of the individual fatty acids as their 9-anthrylmethyl esters is achieved on a highly efficient octadecylsilylated silica column (150- x 3-mm i.d., 3-microm particle size) using a stepwise gradient elution with methanol-water. The method is standardized with commercially available CLA isomers (cis-9, trans-11 and trans-10, cis-12-octadecadienoic acids, and their cis,cis and trans,trans isomers) and applied for determination of the fatty acid compositions of milk and sdairy products.     

Retention,enantioselectivity and enantiomeric elution order of propranolol and its ester derivatives on an alpha1-acid glycoprotein-bonded column

Summary The retention, enantionselectivity and enantiomeric elution order of racemic propranolol (PP) and its ester derivatives (O-acetyl,-propionyl,-butyrul and-valeryl PP) on an ₁-acid glycoprotein (AGP)-bonded column have been investigated by changing eluent composition (eluent pH, buffer concentration, type and content of organic modifier). The retention of these cationic solutes, PP and its ester derivatives, was influenced by eluent pH, ionic strength and organic modifier content. The enantioselectivity was dependent on eluent pH and type of organic modifier. Reversal of the enantiomeric elution order of ester derivatives of PP (O-propionyl-butyryl) and-valeryl PP) occurred around eluent pH 6–7. These results suggst that chiral recognition or binding properties may be altered by the change in eluent composition, espeically eluent pH and type of organic modifier.     

An efficient synthesis of the orally-active GpIIb/IIIa antagonist FR184764

An efficient synthesis of the orally-active GpIIb/IIIa antagonist FR184764 was achieved. The key intermediate, an optically active ethynyl β-amino ester, was synthesized efficiently by utilizing a lipase catalyzed kinetic resolution step.     

Preparation of aromatic copolyesteramides by the direct polycondensation with a vilsmeier adduct derived from tosyl chloride and N,N-dimethylformamide

The reaction promoted by Vilsmeier adduct derived from tosyl chloride (TsCl) with N,N-dimethylformamide (DMF) was successfully applied to the preparation of copolyesteramides of high molecular weights directly from aromatic dicarboxylic acids, diamines, and bisphenols. The polycondensation was significantly affected by the reaction of activated dicarboxylic acids with bisphenols and diamines. Addition of a mixture of bisphenols and diamines likely caused gelation of the reaction mixtures, resulting in insoluble polymers, especially with high mol % diamines. Stepweise addition of them, however, gave the homogeneous reaction mixtures and copolymers of better solubility. These phenomena were studied in terms of sequence length distribution of polyester units, which was estimated by thermal analyses of the random copolymers prepared under various conditions for the initial reaction with bisphenols.     

Radical-initiated homo- and copolymerization of α-methylene-γ-butyrolactone

The kinetics of α-methylene-γ-butyrolactone (α-MBL) homopolymerization was investigated in N,N-dimethylformamide (DMF) with azobis(isobutyronitrile) as initiator. The rate of polymerization (R_p) was expresed by R_p = k[AIBN]^0.54[α-MBL]^1.1 and the overall activation energy was calculated as 76.1 kJ/mol. Kinetic constants for α-MBL polymerization were obtained as follows: k_p/k_t^1/2 = 0.161 L^1/2 mol^?1/2·s^?1/2; 2fk_d = 2.18 × 10^?5 s^?1. The relative reactivity ratios of α-MBL(M₂) copolymerization with styrene (r₁ = 0.14, r₂ = 0.87) were obtained. Applying the Q–e scheme led to Q = 2.2 and e = 0.65. These Q and e values for α-MBL are higher than those for MMA     

Separation of stereoisomers of some terpene derivatives by capillary gas chromatography-mass spectrometry and high-performance liquid chromatography using beta-cyclodextrin derivative columns

Gas chromatographic separations of the stereoisomers of menthol derivatives, important intermediates in the synthesis of physiologically active natural products, were carried out on several substituted beta-cyclodextrin (CD) columns, including per-O-methyl-beta-cyclodextrin (PME-beta-CD), heptakis(2,3-di-O-acetyl-6-tert-butyldimethylsilyl)-beta-CD (DIAC-6-TBDS-beta-CD), and heptakis(2,3-di-O-methyl-6-tert-butyldimethylsilyl)-beta-CD (DIME-6-TBDS-beta-CD) as chiral stationary phases (CSPs). With the DIME-6-TBDS-beta-CD column, a separation of the Z- and E-isomers of methylidenementhol was accomplished; no separation was achieved with the other columns. The stereoisomers of methylidenementhol and the corresponding tert-butyldimethylsilyl (TBS) ether were separated on both the beta-CD and the heptakis(2,3,6-tri-O-methyl)-beta-cyclodextrin (TME-beta-CD) columns by high-performance liquid chromatography (HPLC) with a mobile phase involving acetonitrile and H(2)O. For the separation of the Z- and E-isomers of methylidenementhol, the TME-beta-CD column was superior. In contrast, the beta-CD column was preferable in the case of the corresponding TBS ether.     

A new synthesis, including asymmetric synthesis, of spiro[4.n]alkenones from three components: cyclic ketones, chloromethyl p-tolyl sulfoxide, and acetonitrile; and a formal total synthesis of racemic acorone

1-Chlorovinyl p-tolyl sulfoxides were synthesized from several kinds of cyclic ketones and chloromethyl p-tolyl sulfoxide in good yields. Treatment of the 1-chlorovinyl p-tolyl sulfoxides with cyanomethyllithium at −78°C to room temperature gave spirocyclic enaminonitriles in high yields. Acidic treatment of the enaminonitriles afforded spiro[4.n]alkenones in good yields. By using an unsymmetrical cyclic ketone, α-tetralone, and optically active chloromethyl p-tolyl sulfoxide, this procedure afforded enantiomerically pure spiro[4.5]decenone in good yield with excellent asymmetric induction from the sulfoxide chiral center. By using this method a formal total synthesis of a racemic spirocyclic sesquiterpene, acorone, was realized.     

Practical enantioselective synthesis of endothelin antagonist S-1255 by dynamic resolution of 4-methoxychromene-3-carboxylic acid intermediate

A practical multikilogram-scale synthesis of enantiomerically pure S-1255 (1), a potent and orally active ET(A) receptor antagonist, is described. Utilizing readily available starting materials and reagents, the entire sequence of reactions starting from 2,5-dihydroxyacetophenone 8 proceeded under mild conditions to give 1 in an excellent chemical yield (8 steps, 41% overall yield) and in a high enantiopurity (98% ee). The crucial step of the synthesis is a dynamic resolution of key intermediate 16. (R)-Methoxy acid (R)-16 having 97-99% ee was obtained in 83-84% yield from racemic 16 as a crystalline (1S,2R)-(+)-norephedrine or (+)-cinchonine salt by the dynamic resolution comprising concurrent crystallization and in situ racemization. A mechanism of the dynamic resolution through a ring-opened zwitterionic intermediate is discussed. In the final synthetic step, an effective carbon-carbon bond formation between the C4 carbon and the p-anisyl group was accomplished by a conjugate addition-elimination reaction of Grignard reagent 3 to (R)-16 to give 1 having 98% ee. Owing to high efficiencies of functional group transformations, carbon-carbon bond formations, and the dynamic resolution, the synthesis required no chromatographic purification and was amenable to a multikilogram-scale preparation. Several kilograms of 1 for clinical trials were successfully prepared by this process.