Alternative Ecosorbent for the Determination of Trihalomethanes in Aqueous Samples in SPME Mode

A new sorbent material based on modified clay with ionic liquid immobilized into an agarose film was developed as part of this study. It was applied to determine organochlorine pollutants, like disinfection byproducts, through headspace solid-phase microextraction-gas chromatography-electron capture detection (HS-SPME-GC-ECD). The disinfection byproducts determined in this study were used as model molecules because they were volatile compounds, with proven severe effects on human health. Their presence in aquatic environments is in trace concentrations (from pg L⁻¹ to mg L⁻¹). They are classified as emergent pollutants and their determination is a challenge for analytical chemists. The parameters which affected the extraction efficiency, i.e., number and distance between SPME discs, salt concentration, the temperature of extraction, extraction time, and desorption time, were optimized. A wide linear dynamic range of 10–1000 ng mL⁻¹ and coefficients of determination better than 0.997 were achieved. The limits of detection and the limits of quantitation were found in the ranges of (1.7–3.7) ng mL⁻¹ and (5.6–9.9) ng mL⁻¹, respectively. The precision, expressed as relative standard deviation (RSD), was better than 8%. The developed sorbent exhibits good adsorption affinity. The applicability of the proposed methodology for the analysis of trihalomethanes in environmental and water samples showed recoveries in the range of 86–95%. Finally, the newly created method fully complied with the principles of green chemistry. Due to the fact that the sorbent holder was made of agarose, which is a wholly biodegradable material, sorbent clay is a widespread material in nature. Moreover, the reagents intercalated into the montmorillonite are new green solvents, and during the whole procedure, low amounts of organic solvents were used.     

In silico modeling of PAX8–PPARγ fusion protein in thyroid carcinoma: influence of structural perturbation by fusion on ligand-binding affinity

Journal of Computer-Aided Molecular Design - Paired box 8 (PAX8)–peroxisome proliferator-activated receptor γ (PPARγ) rearrangement is believed to play an important role in...     

An Efficient Method for the Conjugation of Hydrophilic and Hydrophobic Components by Solid‐Phase‐Assisted Disulfide Ligation

Chemical conjugation between hydrophilic and hydrophobic components is difficult because of their extremely different solubility. Herein, we report a new versatile method with a solid‐phase‐assisted disulfide ligation to overcome the difficulty of conjugation attributed to solubility. The method involves two steps in a one‐pot process: 1) loading of a hydrophobic molecule onto a resin in an organic solvent, and 2) release of the solid‐supported hydrophobic molecule as a conjugate with a hydrophilic molecule into an aqueous solvent. This strategy allows the use of a suitable solvent system for the substrates in each step. Conjugates of a water‐insoluble drug, plinabulin, with hydrophilic carriers that could not be prepared by solution‐phase reactions were obtained in moderate yields (29–45 %). This strategy is widely applicable to the conjugation of compounds with solubility problems.     

Radical-initiated homo- and copolymerization of α-methylene-γ-butyrolactone

The kinetics of α-methylene-γ-butyrolactone (α-MBL) homopolymerization was investigated in N,N-dimethylformamide (DMF) with azobis(isobutyronitrile) as initiator. The rate of polymerization (R_p) was expresed by R_p = k[AIBN]^0.54[α-MBL]^1.1 and the overall activation energy was calculated as 76.1 kJ/mol. Kinetic constants for α-MBL polymerization were obtained as follows: k_p/k_t^1/2 = 0.161 L^1/2 mol^?1/2·s^?1/2; 2fk_d = 2.18 × 10^?5 s^?1. The relative reactivity ratios of α-MBL(M₂) copolymerization with styrene (r₁ = 0.14, r₂ = 0.87) were obtained. Applying the Q–e scheme led to Q = 2.2 and e = 0.65. These Q and e values for α-MBL are higher than those for MMA     

Transmission electron microscopy study of an AlN nucleation layer for the growth of GaN on a 7-degree off-oriented (0 0 1) Si substrate by metalorganic vapor phase epitaxy

We have investigated the morphology of the high-temperature-grown AlN nucleation layer and its role in the early stage of GaN growth, by means of transmission electron microscopy. The nitride was selectively grown on a 7-degree off-oriented (0 0 1) patterned Si substrate by metalorganic vapor phase epitaxy. AlN was deposited on the inclined unmasked (1 1 1) facet in the form of islands. The size of the islands varied along the slope, which is attributable to the diffusion of the growth species in the vapor phase. The GaN nucleation occurred at the region where rounded AlN islands formed densely. The threading dislocations were observed to generate in the GaN nucleated region.     

Self‐Assembled Fibers Containing Stable Organic Radical Moieties: Alignment and Magnetic Properties in Liquid Crystals

Macroscopically oriented stable organic radicals have been obtained by using a liquid–crystalline (LC) gel composed of an l ‐isoleucine‐based low molecular weight gelator containing a 2,2,6,6‐tetramethylpiperidine 1‐oxyl moiety. The LC gel has allowed magnetic measurements of the oriented organic radical. The gelator has formed fibrous aggregates in liquid crystals via intermolecular hydrogen bonds. The fibrous aggregates of the radical gelator are formed and oriented on cooling by applying a magnetic field to the mixture of liquid crystals and the gelator. Superconducting quantum interference device (SQUID) measurements have revealed that both oriented and nonoriented fibrous aggregates exhibited antiferromagnetic interactions, in which super‐exchange interaction constant J is estimated as ?0.89 cm^?1.     

Polyhydrazides. III. N-methylated polyhydrazides by ring-opening of poly-p-phenylene-1,3,4-oxadiazole

A new ring-opening reaction of 1,3,4-oxadiazole by methylating reagents was developed in fuming sulfuric acid or polyphosphoric acid and then, by applying this reaction to poly-p-phenylene-1,3,4-oxadiazole, a high molecular weight poly-N-methylterephthalylhydrazide was obtained. Various methylating reagents were investigated as ring-opening reagents. The degrees of ring-opening in polymers were estimated and related to the properties of the polymers.     

Linear free energy relationships for carbon-13 NMR chemical shifts of substituted benzoic acids1

In order to examine ¹³C-SCS of substituted benzoic acids, chemical shifts of the acid form (I) and the dissociated form (II) have been obtained separately. Single substituent parameters, σ⁰ or σ⁺ are correlated with the shifts for the carboxyl (δ_co) or ipso carbons (δ_ipso), respectively. Among the available five equations which are developed for the analysis with dual (or divided) substituent parameters (DSP), the Swain-Lupton equation (eqn 3) and the Taft-Swain-Lupton equation (eqn 4) give much better correlations, not only for δ_co and δ_ipso but also for the results for ring carbons (C(2), C(5), C(6)), except for those attached to or neighboured by substituents. It is concluded that the SCS of aromatic compounds are best analyzed with substituent parameters derived from reactions or equilibria on the basis of linear free energy relationships.