Desorption of surfactant and sintering of surface-modified PdxNi1 − x nanoparticles

A series of Pd_xNi_1 − x nanoparticles in a diameter of 6-7 nm were prepared by wet chemical reduction. They were then modified with two surfactants, stearic acid (SA) and polyethylene glycol (PEG). Desorption of the surfactant was studied using a temperature programmed desorption technique, and the sintering behavior of surface-modified Pd_xNi_1 − x nanoparticles was examined. Since surface energy of the nanoparticles depends on the alloy composition, it can be correlated with the desorption temperature of surfactant from the nanoparticle surface. Because Ni has a higher surface energy, the surfactant desorption temperature increases as the Ni content increases. With the same stoichiometry, the desorption temperature of SA is always higher than that of PEG. The SA-modified nanoparticles have higher thermal stability and are less sintered than PEG-modified nanoparticles. The sintering and growth behavior of the nanoparticles can be correlated with variation of surface energy due to different surface modification.     

Separate Polarization Modes Synchronization and Synchronization Switches between Vertical-Cavity Surface-Emitting Lasers

For vertical-cavity surface-emitting lasers (VCSELs) with polarization-rotated feedback, there exist several synchronization types such as synchronizations between total powers and synchronizations between separate polarization modes. Based on the two-mode rate equations, we study and compare numerically the performances of different synchronization types. Our results show that three synchronization types exhibit good performances when their synchronization conditions are satisfied. They are the complete synchronization between total powers, complete synchronization between x-polarized modes, and generalized synchronization between x-polarized and y-polarized modes. The former two types are sensitive to the injection rate and spontaneous emission, while the third type is contrary. Synchronization type with the best performance may switch from one to another, with changing of injection rate and spontaneous emission factor.     

Effect of C layer on the structures and magnetic properties of (0 0 1)-oriented [C/CoPt]n/Ag films

CoPt/Ag and [C/CoPt]n/Ag thin films have been prepared onto the glass substrates by magnetron sputtering. We investigated the evolution of texture and magnetic properties of CoPt/Ag and [C/CoPt]n/Ag films. The results show that C-doping plays an important role in improving (0 0 1) texture, improving the order parameter S, reducing the intergrain interactions, and making the magnetization reversal mechanism more close to Stoner-Wolfarth rotational mechanism. The growth mechanism of (0 0 1) texture also seems to be related strongly to the films thickness. Our results show that the highly (0 0 1)-oriented films with ordered fct phase have a significant potential for the perpendicular media of extremely high-density recording.     

Large time behavior of the solutions to the Boltzmann equation with specular reflective boundary condition

In this paper a half space problem for the one-dimensional Boltzmann equation with specular reflective boundary condition is investigated. It is shown that the solution of the Boltzmann equation time-asymptotically converges to a global Maxwellian under some initial conditions. Furthermore, a time-decay rate is also obtained.     

A few points on omnidirectional band gaps in one-dimensional photonic crystals

The universal condition for the formation of omnidirectional band gaps (OBG) in photonic crystal (PC) was derived with consideration of permeability of the materials. And it was found that there are four kinds of PCs: one of them has no OBG, and one always possesses OBG. For the other two kinds of PCs, there are OBG for only TM or TE waves respectively. Moreover, in all PCs, the OBG can be broadened by decreasing the refractive index of the ambient medium or/and increasing the contrast between the wave impedances of the component materials of the PC. PACS 42.70.Qs; 71.20.Tx     

光电倍增管脉冲性能研究

采用外腔式电光开光,调制主动照相探测光源,使光电倍增管处于脉冲工作状态下,以提高光电倍增管的输出幅度和动态范围,改善信号的信噪比,同时避免样品和探测器受长时间强激光照射.对滨松H6780光电倍增管进行了调试,使其线性输出电流由静态的0.1mA提升到脉冲状态的4.4mA,信噪比提高4.5倍.该技术对其他光敏探测有借鉴意义.     

The study of lithium fast ion conductors of Li3xLa0.67−xScyTi1−2yNbyO3 system

Perovskite-type lithium fast ion conductors of Li_3xLa_0.67−xSc_yTi_1−2yNb_yO₃ system were prepared by solid state reaction. X-Ray powder diffraction shows that perovskite solid solution form in the ranges of x=0.10, y≤0.10. AC impedance measurements indicate that the bulk conductivities and the total conductivities are of the order of 10⁻⁴ S·cm⁻¹ and 10⁻⁵ S·cm⁻¹ at 25 °C respectively. The compositions have low bulk activation energies of about 17 kJ/mol in the temperature ranges of 298 – 523 K and total activation energies of about 37 kJ/mol in the temperature ranges of 298 – 523 K.     

Effect of end groups on complexation kinetics between cyclodextrins and guest polymers

α‐Cyclodextrin (α‐CD) has been complexed with various poly(ethylene glycol) (PEG) derivatives in aqueous solution. It has been found that the end groups of PEG derivatives affect the complexation kinetics greatly, but have only a little influence on the thermodynamic behavior. By increasing the hydrophobicity of end groups, the complexation speeds up rapidly. On the other hand, the bulky end groups slow down the threading of polymeric guests into the cavity of CD. By changing the hydrophobicity and the size of end groups, the complexation rate can be adjusted in the range of several orders of magnitudes, which should be quite useful in the design of new supramolecular systems. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2050–2057, 2006     

Ribaucour Transformations for Hypersurfaces in Space Forms

The theory of Ribaucour transformations for hypersurfaces in space forms is established. For any such hypersurface M, that admits orthonormal principal vector fields, it was shown the existence of a totally umbilic hypersurface locally associated to M by a Ribaucour transformation. A method of obtaining linear Weingarten surfaces in a three-dimensional space form is provided. By applying the theory, a new one-parameter family of complete constant mean curvature (cmc) surfaces in the unit sphere, locally associated to the flat torus, is obtained. The family contains a class of complete cmc cylinders in the sphere. In particular, one gets a family of complete minimal surfaces and minimal cylinders, locally associated to the Clifford torus.Mathematics Subject Classifications (2000): 53C20.