Electrodeposition of mercury film on electrodes modified with clay minerals

A new type of carbon paste electrode modified with clay mineral and covered with a mercury film is presented in this work. Electrodeposition of the mercury film was performed on the carbon paste electrode modified with montmorillonite. The mercury film was deposited by both electrodeposition in situ and a preliminary electrodeposition. The pre-deposited film of mercury showed to be suitable for anodic stripping voltammetry. An open-circuit sorption of Cd, Pb, and Cu with subsequent anodic stripping voltammetry exhibited higher current responses of metals. Besides the enhanced sensitivity superior separation of the current responses during a simultaneous stripping of metals is expected to be achieved by means of the newly prepared electrode. Presented at the 57th Congress of Chemical Societies, Tatranské Matliare, 4–8 September 2005.     

Theoretical and photoluminescence studies on the d10-s2 AuI-TlI interaction in extended unsupported chains

The reactions of solutions of TlPF(6) and OPPh(3) in tetrahydrofuran or acetone with NBu(4)[AuR(2)] (R=C(6)Cl(5), C(6)F(5)) gave the new complexes [Au(C(6)Cl(5))(2)](2)[Tl(OPPh(3))][Tl(OPPh(3))(L)] (L=THF (1), acetone (2)) and the previously reported [Tl(OPPh(3))(2)][Au(C(6)F(5))(2)] (3). The crystal structures of complexes 1 and 2 display extended unsupported chains with short intermolecular interactions between alternating gold(I) and thallium(I) centres. Moreover, the Tl(I) centres show two different types of geometrical environments, such as pseudotetrahedral and distorted trigonal-bipyramidal, due to the presence of solvent molecules that act as ligands in the solid-state structure. Quasirelativistic and nonrelativistic ab initio calculations were performed to study the nature of the intermetallic Au(I)-Tl(I) interactions and are consistent with the presence of a high ionic contribution (80 %) and dispersion-type (van der Waals) interaction with a charge-transfer contribution (20 %) when relativistic effects are taken into account. All complexes are luminescent in the solid state at room temperature and at 77 K. Complexes 1 and 2 show site-selective excitation, probably due to the different environments around the Tl(I) centres. The DFT and time-dependent (TD)-DFT calculations are in agreement with the experimental excitation spectra for all complexes and confirm the site-selective excitation behaviour as a function of the Tl(I) geometrical environment.     

Mineral content and botanical origin of Spanish honeys

Eleven elements (Zn, P, B, Mn, Mg, Cu, Ca, Ba, Sr, Na and K) were determined by inductively plasma coupled spectrometry in 40 honey samples from different places of Spain and four different botanical origins: Eucalyptus (Eucalyptus sp.), Heather (Erica sp.), Orange-blossom (Citrus sinensis) and Rosemary (Rosmarinus officinalis). K, Ca and P show the higher levels with average concentrations ranged between 434.1-1935 mg kg⁻¹ for K; 42.59-341.0 mg kg⁻¹ for Ca and 51.17-154.3 mg kg⁻¹ for P. Levels of Cu (0.531-2.117 mg kg⁻¹), Ba (0.106-1.264 mg kg⁻¹) and Sr (0.257-1.462 mg kg⁻¹) are the lowest in all honey samples. Zn (1.332-7.825 mg kg⁻¹), Mn (0.133-9.471 mg kg⁻¹), Mg (13.26-74.38 mg kg⁻¹) and Na (11.69-218.5 mg kg⁻¹) concentrations were found strongly dependent on the kind of botanical origin.Results were submitted to pattern recognition procedures, unsupervised methods such as cluster and principal components analysis and supervised learning methods like linear discriminant analysis in order to evaluate the existence of data patterns and the possibility of differentiation of Spanish honeys from different botanical origins according to their mineral content. Cluster analysis shows four clusters corresponding to the four botanical origins of honey and PCA explained 71% of the variance with the first two PC variables. The best-grouped honeys were those from heather; eucalyptus honeys formed a more dispersed group and finally orange-blossom and rosemary honeys formed a less distinguishable group.     

Cross sections of the O+ + H2 --> OH+ + H ion-molecule reaction and isotopic variants (D2, HD): quasiclassical trajectory study and comparison with experiments

A dynamics study [cross section and microscopic mechanism versus collision energy (E(T))] of the reaction O+ + H2 --> OH+ + H, which plays an important role in Earth's ionosphere and interstellar chemistry, was conducted using the quasiclassical trajectory method, employing an analytical potential energy surface (PES) recently derived by our group [R. Martinez et al., J. Chem. Phys. 120, 4705 (2004)]. Experimental excitation functions for the title reaction, as well as its isotopic variants with D2 and HD, were near-quantitatively reproduced in the calculations in the very broad collision energy range explored (E(T) = 0.01-6.0 eV). Intramolecular and intermolecular isotopic effects were also examined, yielding data in good agreement with experimental results. The reaction occurs via two microscopic mechanisms (direct and nondirect abstraction). The results were satisfactorily interpreted based on the reaction probability and the maximum impact parameter dependences with E(T), and considering the influence of the collinear [OHH]+ absolute minimum of the PES on the evolution from reactants to products. The agreement between theory and experiment suggests that the reaction mainly occurs through the lowest energy PES and nonadiabatic processes are not very important in the wide collision energy range analyzed. Hence, the PES used to describe this reaction is suitable for both kinetics and dynamics studies.     

Extraction and spectrophotometric determination of trace amounts of tin(II) with diphenylglyoxal bis(2-hydroxybenzoylhydrazone)

Diphenylglyoxal bis(2-hydroxybenzoylhydrazone) has been used as a sensitive reagent for the spectrophotometric determination of tin. This reagent forms an orange-yellow complex with stannous ion at pH 3.5–7.0 (λ_max = 455 nm, ? = 2.25 × 10⁴ liter mol^?1/cm^?1 while no reaction is observed with quadrivalent tin. The colored complex extracted into isobutyl methyl ketone has been used for the spectrophotometric determination of trace amounts of tin(II). The molar absorption in the organic solvent is 3.54 × 10⁴ liter mol^?1 cm^?1 and the compound shows its maximum absorbance at 455 nm. The interferences of foreign ions have been determined.     

Sorption of cesium on composite sorbents based on nickel ferrocyanide

Composite sorbents based on potassium nickel ferrocyanide embedded in silica gel matrix were prepared and characterised by powdered X-ray diffraction analysis, IR spectra, Mössbauer spectra and electron microscopy. The sorbent exhibits very good efficiency for cesium uptake and radiation resistance. The sorption capacity for cesium ions is comparable with the capacity for the pure ferrocyanides.     

Computation in kinetics, III. A new method for kinetic model search based on simultaneous regression estimation of rate constants, stoichiometry and/or reaction order

Modified samples of natural mordenites have been found to catalyze the oxidative condensation of methane to yield ethane and ethylene. The selectivity towards C₂ hydrocarbons increases, whereas the acidity of zeolites falls.

---

, . C₂ .

     

pH-induced destabilization of lipid bilayers by a peptide from the VP3 protein of the capsid of hepatitis A virus.

The membrane destabilizing and fusogenic properties of the synthetic peptide VP3(110-121), corresponding to an immunogenic sequence of the hepatitis A virus (HAV) VP3 capsid protein, were studied. By tryptophan fluorescence and acryalmide quenching it was demonstrated that the peptide binds liposomes of POPC-SM-DPPE (47 + 39 + 14) and POPC-SM-DPPE-DOTAP (40 + 33 + 12 + 15) and penetrates the membrane, at both neutral and acidic pH (POPC = 1-palmitoyl-2-oleoylglycero-sn-3-phosphocholine; SM = sphingomyelin; DPPE = 1,2-dipalmitoylphosphatidylethanolamine; DOTAP = 1,2-dioleoyl-3-trimethylammoniumpropane). VP3(110-121) did not have membrane-destabilizing properties at neutral pH. Acid-induced destabilization of the vesicles was demonstrated by fluorescence techniques and dynamic light scattering. VP3(110-121) induced aggregation of POPC-SM-DPPE-DOTAP (40 + 33 + 12 + 15) vesicles, lipid mixing and leakage of vesicle contents, all consistent with fusion of vesicles. In POPC-SM-DPPE (47 + 39 + 14) vesicles, at acidic pH, VP3(110-121) induced membrane destabilization with leakage of contents but without aggregation of vesicles or lipid mixing. The peptide only showed fusogenic properties when bound to the vesicles at neutral pH before acidification to pH below 6.0, and no effect was seen if the peptide was added to vesicles already set at acidic pH. These results may have physiological significance in the mechanism of infection of host hepatic cells by HAV.     

Natural zeolitic material of the clinoptilolite type doped with iodine and its ions

The aim of this study was the preparation of natural zeolitic materials doped with iodine and its ions. Natural zeolite from an East Slovakian deposit was used. The content of iodine in the zeolitic products depended on the experimental conditions used for the preparation. The products and their intermediates obtained at 100, 200, 400 and 900°C were identified.     

Flow injection determination of oxalate in urine based on an inhibitory effect

Summary Two methods based on the use of the normal and stopped-flow injection modes were developed for the determination of oxalate based on its inhibitory effect on the catalytic action of Fe(III) on the 2,4-diaminophenol/hydrogen peroxide system. The linear determination ranges achieved were between 0.2 and 12.0 g ml^–1 and between 0.2 and 40.0 g ml^–1, the precision was ±5.4%, and ±3.5%, and the sampling rate was 30 and 20 samples h^–1 for the normal and stopped-flow method, respectively. Both methods have been applied to the determination of oxalate in urine with excellent results.